realtek: extend simple thermal driver to support rtl839x

* Extends SoC thermal sensor on rtl839x
* Tested on HP JG928A

Signed-off-by: Stephen Howell <howels@allthatwemight.be>
Link: https://github.com/openwrt/openwrt/pull/18825
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Stephen Howell 2025-05-17 12:06:10 +01:00 committed by Robert Marko
parent 079db0ab81
commit cc5421128e
4 changed files with 76 additions and 2 deletions

View file

@ -272,6 +272,11 @@
pinctrl-names = "default";
pinctrl-0 = <&mdio_aux_mdx>;
};
soc_thermal: thermal {
compatible = "realtek,rtl8390-thermal";
#thermal-sensor-cells = <0>;
};
};
pinmux@1b000004 {
@ -343,4 +348,20 @@
interrupt-parent = <&intc>;
interrupts = <20 2>;
};
thermal_zones: thermal-zones {
cpu-thermal {
polling-delay-passive = <1000>;
polling-delay = <1000>;
coefficients = <1000 0>;
thermal-sensors = <&soc_thermal>;
trips {
cpu-crit {
temperature = <105000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};
};

View file

@ -20,6 +20,18 @@
#define RTL8380_TEMP_VALID BIT(8)
#define RTL8380_TEMP_OUT_MASK GENMASK(6, 0)
#define RTL8390_THERMAL_METER0_CTRL0 0x274
#define RTL8390_THERMAL_METER0_CTRL1 0x278
#define RTL8390_THERMAL_METER0_CTRL2 0x27c
#define RTL8390_THERMAL_METER0_RESULT 0x280
#define RTL8390_THERMAL_METER1_CTRL0 0x284
#define RTL8390_THERMAL_METER1_CTRL1 0x288
#define RTL8390_THERMAL_METER1_CTRL2 0x28c
#define RTL8390_THERMAL_METER1_RESULT 0x290
#define RTL8390_TM_ENABLE BIT(0)
#define RTL8390_TEMP_VALID BIT(8)
#define RTL8390_TEMP_OUT_MASK GENMASK(6, 0)
#define RTL9300_THERMAL_METER_CTRL0 0x60
#define RTL9300_THERMAL_METER_CTRL1 0x64
#define RTL9300_THERMAL_METER_CTRL2 0x68
@ -69,6 +81,37 @@ static const struct thermal_zone_device_ops rtl8380_ops = {
.get_temp = rtl8380_get_temp,
};
static void rtl8390_thermal_init(struct realtek_thermal_priv *priv)
{
priv->enabled = !regmap_update_bits(priv->regmap, RTL8390_THERMAL_METER0_CTRL0, RTL8390_TM_ENABLE, RTL8390_TM_ENABLE);
}
static int rtl8390_get_temp(struct thermal_zone_device *tz, int *res)
{
struct realtek_thermal_priv *priv = thermal_zone_device_priv(tz);
int offset = thermal_zone_get_offset(tz);
int slope = thermal_zone_get_slope(tz);
u32 val;
int ret;
if (!priv->enabled)
rtl8390_thermal_init(priv);
/* assume sensor0 is the CPU, both sensor0 & sensor1 report same values +/- 1 degree C */
ret = regmap_read(priv->regmap, RTL8390_THERMAL_METER0_RESULT, &val);
if (ret)
return ret;
if (!(val & RTL8390_TEMP_VALID))
return -EAGAIN;
*res = FIELD_GET(RTL8390_TEMP_OUT_MASK, val) * slope + offset;
return 0;
}
static const struct thermal_zone_device_ops rtl8390_ops = {
.get_temp = rtl8390_get_temp,
};
static void rtl9300_thermal_init(struct realtek_thermal_priv *priv)
{
/* increasing sample delay makes get_temp() succeed more often */
@ -126,6 +169,7 @@ static int realtek_thermal_probe(struct platform_device *pdev)
static const struct of_device_id realtek_sensor_ids[] = {
{ .compatible = "realtek,rtl8380-thermal", .data = &rtl8380_ops, },
{ .compatible = "realtek,rtl8390-thermal", .data = &rtl8390_ops, },
{ .compatible = "realtek,rtl9300-thermal", .data = &rtl9300_ops, },
{ /* sentinel */ }
};

View file

@ -6,10 +6,10 @@
+config REALTEK_THERMAL
+ tristate "Realtek RTL838x and RTL930x thermal sensor support"
+ depends on RTL838X || RTL930X || COMPILE_TEST
+ depends on RTL838X || RTL839X || RTL930X || COMPILE_TEST
+ depends on THERMAL_OF
+ help
+ Support thermal sensor in Realtek RTL838x and RTL930x SoCs
+ Support thermal sensor in Realtek RTL838x, RTL839x and RTL930x SoCs
+
endif
--- a/drivers/thermal/Makefile

View file

@ -218,6 +218,7 @@ CONFIG_REALTEK_OTTO_WDT=y
CONFIG_REALTEK_PHY=y
CONFIG_REALTEK_PHY_HWMON=y
CONFIG_REALTEK_SOC_PHY=y
CONFIG_REALTEK_THERMAL=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MDIO=y
@ -254,6 +255,14 @@ CONFIG_SYS_SUPPORTS_MULTITHREADING=y
CONFIG_SYS_SUPPORTS_SCHED_SMT=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_TARGET_ISA_REV=2
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y