diff --git a/target/linux/mediatek/dts/mt7981b-zbtlink-zbt-z8102ax-v2.dts b/target/linux/mediatek/dts/mt7981b-zbtlink-zbt-z8102ax-v2.dts new file mode 100644 index 00000000000..6557b0ff4a4 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-zbtlink-zbt-z8102ax-v2.dts @@ -0,0 +1,337 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; +#include +#include + +#include "mt7981b.dtsi" + +/ { + model = "ZBT Z8102AX V2"; + compatible = "zbtlink,zbt-z8102ax-v2", "mediatek,mt7981"; + + aliases { + serial0 = &uart0; + led-boot = &led_status_red; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_green; + label-mac-device = &gmac0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wps"; + linux,code = ; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + }; + + }; + + leds { + compatible = "gpio-leds"; + + led_status_red: red { + gpios = <&pio 9 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_STATUS; + }; + + led_status_green: green { + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_STATUS; + }; + + led_status_blue: blue { + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_STATUS; + }; + + led_status_5g1: 5g1 { + gpios = <&pio 8 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_USB; + function-enumerator = <0>; + }; + + led_status_5g2: 5g2 { + gpios = <&pio 13 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_USB; + function-enumerator = <1>; + }; + }; + + watchdog { + compatible = "linux,wdt-gpio"; + gpios = <&pio 2 GPIO_ACTIVE_HIGH>; + hw_algo = "toggle"; + hw_margin_ms = <1000>; + }; + + gpio-export { + compatible = "gpio-export"; + #size-cells = <0>; + + pcie { + gpio-export,name = "pcie_power"; + gpio-export,output = <1>; + gpios = <&pio 3 GPIO_ACTIVE_HIGH>; + }; + + 5g1 { + gpio-export,name = "5g1"; + gpio-export,output = <1>; + gpios = <&pio 4 GPIO_ACTIVE_HIGH>; + }; + + 5g2 { + gpio-export,name = "5g2"; + gpio-export,output = <1>; + gpios = <&pio 5 GPIO_ACTIVE_HIGH>; + }; + + sim1 { + gpio-export,name = "sim1"; + gpio-export,output = <0>; + gpios = <&pio 6 GPIO_ACTIVE_LOW>; + }; + + sim2 { + gpio-export,name = "sim2"; + gpio-export,output = <0>; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + nvmem-cell-names = "mac-address"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_02a>; + }; +}; + +&mdio_bus { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + spi_nand@0 { + compatible = "spi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + spi-max-frequency = <52000000>; + spi-tx-buswidth = <4>; + spi-rx-buswidth = <4>; + + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x0000000 0x0100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x0100000 0x0080000>; + }; + + factory: partition@180000 { + label = "Factory"; + reg = <0x0180000 0x0200000>; + read-only; + }; + + partition@380000 { + label = "FIP"; + reg = <0x0380000 0x0200000>; + read-only; + }; + + nand_rootfs: partition@580000 { + label = "ubi"; + reg = <0x0580000 0x7220000>; + }; + }; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_004>; + }; + + port@1 { + reg = <1>; + label = "lan2"; + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_004>; + }; + + port@2 { + reg = <2>; + label = "lan3"; + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_004>; + }; + + port@3 { + reg = <3>; + label = "lan4"; + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_004>; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&pio { + gpio-line-names = + "wps", + "reset", + "watchdog", + "pcie", + "5g1", + "5g2", + "sim1", + "sim2", + "5g1_status", + "red_status", + "green_status", + "blue_status", + "", + "5g2_status"; + + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&wifi { + status = "okay"; + nvmem-cells = <&eeprom_factory>; + nvmem-cell-names = "eeprom"; +}; + +&factory { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_004: macaddr@004 { + reg = <0x004 0x6>; + }; + macaddr_factory_02a: macaddr@02a { + reg = <0x02a 0x6>; + }; + eeprom_factory: eeprom@0 { + reg = <0x0 0x1000>; + }; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 861928d82da..a96ea99bc90 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -57,6 +57,7 @@ mediatek_setup_interfaces() ruijie,rg-x60-pro|\ unielec,u7981-01*|\ zbtlink,zbt-z8102ax|\ + zbtlink,zbt-z8102ax-v2|\ zyxel,ex5601-t0-stock|\ zyxel,ex5601-t0-ubootmod) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1 diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/03_gpio_switches b/target/linux/mediatek/filogic/base-files/etc/board.d/03_gpio_switches index 4cbec1ef078..1fe74f2b6fd 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/03_gpio_switches @@ -5,7 +5,8 @@ board_config_update board=$(board_name) case "$board" in -zbtlink,zbt-z8102ax) +zbtlink,zbt-z8102ax|\ +zbtlink,zbt-z8102ax-v2) ucidef_add_gpio_switch "5g1" "Power 1st modem" "5g1" "1" ucidef_add_gpio_switch "5g2" "Power 2nd modem" "5g2" "1" ucidef_add_gpio_switch "pcie" "Power PCIe port" "pcie" "1" diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 5ca1ca462f5..c42399cf645 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -185,6 +185,7 @@ case "$board" in routerich,ax3000|\ routerich,ax3000-ubootmod|\ zbtlink,zbt-z8102ax|\ + zbtlink,zbt-z8102ax-v2|\ zbtlink,zbt-z8103ax|\ zyxel,ex5601-t0-stock|\ zyxel,ex5601-t0-ubootmod) diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 337403411a1..b977d6117e0 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -2015,6 +2015,23 @@ define Device/zbtlink_zbt-z8102ax endef TARGET_DEVICES += zbtlink_zbt-z8102ax +define Device/zbtlink_zbt-z8102ax-v2 + DEVICE_VENDOR := Zbtlink + DEVICE_MODEL := ZBT-Z8102AX-V2 + DEVICE_DTS := mt7981b-zbtlink-zbt-z8102ax-v2 + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 kmod-usb-net-qmi-wwan kmod-usb-serial-option + KERNEL_IN_UBI := 1 + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 65536k + IMAGES += factory.bin + IMAGE/factory.bin := append-ubi | check-size $$(IMAGE_SIZE) + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += zbtlink_zbt-z8102ax-v2 + define Device/zbtlink_zbt-z8103ax DEVICE_VENDOR := Zbtlink DEVICE_MODEL := ZBT-Z8103AX