Merge branch 'openwrt:master' into master

include/kernel-6.1

@@ -1,2 +1,2 @@
-LINUX_VERSION-6.1 = .54
+LINUX_VERSION-6.1 = .55
-LINUX_KERNEL_HASH-6.1.54 = a3181e46d407cd6ab15f412402e8220684ff9659b0262b7a3de7384405ce4e27
+LINUX_KERNEL_HASH-6.1.55 = a87e241ec15d53452c4efe219713a3769d88cc436b5b98cf6efb262c4aff15c0

include/package-ipkg.mk

@@ -179,7 +179,7 @@ $$(call addfield,Depends,$$(Package/$(1)/DEPENDS)
 )$$(call addfield,Provides,$$(call mergelist,$$(filter-out $(1)$$(ABIV_$(1)),$(PROVIDES)$$(if $$(ABIV_$(1)), $(1) $(foreach provide,$(PROVIDES),$(provide)$$(ABIV_$(1))))))
 )$$(call addfield,Alternatives,$$(call mergelist,$(ALTERNATIVES))
 )$$(call addfield,Source,$(SOURCE)
-)$$(call addfield,SourceName,$(1)
+)$$(call addfield,SourceName,$(PKG_NAME)
 )$$(call addfield,License,$(LICENSE)
 )$$(call addfield,LicenseFiles,$(LICENSE_FILES)
 )$$(call addfield,Section,$(SECTION)

package/boot/arm-trusted-firmware-sunxi/Makefile

@@ -7,10 +7,10 @@
 
 include $(TOPDIR)/rules.mk
 
-PKG_VERSION:=2.8
+PKG_VERSION:=2.9
 PKG_RELEASE:=1
 
-PKG_HASH:=df4e0f3803479df0ea4cbf3330b59731bc2efc2112c951f9adb3685229163af9
+PKG_HASH:=76a66a1de0c01aeb83dfc7b72b51173fe62c6e51d6fca17cc562393117bed08b
 
 PKG_LICENSE:=BSD-3-Clause
 PKG_LICENSE_FILES:=license.md

package/boot/uboot-envtools/files/mediatek_filogic

@@ -48,6 +48,9 @@ cetron,ct3003|\
 netgear,wax220)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
 	;;
+ubnt,unifi-6-plus)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x10000"
+	;;
 xiaomi,mi-router-wr30u-112m-nmbm|\
 xiaomi,mi-router-wr30u-stock|\
 xiaomi,redmi-router-ax6000-stock)

package/boot/uboot-envtools/files/qualcommax_ipq807x

@@ -10,7 +10,8 @@ board=$(board_name)
 case "$board" in
 dynalink,dl-wrx36|\
 netgear,rax120v2|\
-netgear,wax218)
+netgear,wax218|\
+netgear,wax620)
 	idx="$(find_mtd_index 0:appsblenv)"
 	[ -n "$idx" ] && \
 		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x20000" "2"

package/firmware/ipq-wifi/Makefile

@@ -35,6 +35,7 @@ ALLWIFIBOARDS:= \
 	edimax_cax1800 \
 	netgear_rax120v2 \
 	netgear_wax218 \
+	netgear_wax620 \
 	prpl_haze \
 	qnap_301w \
 	redmi_ax6 \
@@ -126,6 +127,7 @@ $(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
 $(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
 $(eval $(call generate-ipq-wifi-package,netgear_rax120v2,Netgear RAX120v2))
 $(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218))
+$(eval $(call generate-ipq-wifi-package,netgear_wax620,Netgear WAX620))
 $(eval $(call generate-ipq-wifi-package,qnap_301w,QNAP 301w))
 $(eval $(call generate-ipq-wifi-package,prpl_haze,prpl Haze))
 $(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))

package/libs/openssl/Makefile

@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=openssl
-PKG_VERSION:=3.0.10
+PKG_VERSION:=3.0.11
 PKG_RELEASE:=1
 PKG_BUILD_FLAGS:=no-mips16 gc-sections no-lto
 
@@ -24,7 +24,7 @@ PKG_SOURCE_URL:= \
 	ftp://ftp.pca.dfn.de/pub/tools/net/openssl/source/ \
 	ftp://ftp.pca.dfn.de/pub/tools/net/openssl/source/old/$(PKG_BASE)/
 
-PKG_HASH:=1761d4f5b13a1028b9b6f3d4b8e17feb0cedc9370f6afe61d7193d2cdce83323
+PKG_HASH:=b3425d3bb4a2218d0697eb41f7fc0cdede016ed19ca49d168b78e8d947887f55
 
 PKG_LICENSE:=Apache-2.0
 PKG_LICENSE_FILES:=LICENSE

package/network/services/lldpd/files/lldpd.init

@@ -45,12 +45,16 @@ write_lldpd_conf()
 	local lldp_mgmt_ip
 	config_get lldp_mgmt_ip 'config' 'lldp_mgmt_ip'
 
+	local lldp_syscapabilities
+	config_get lldp_syscapabilities 'config' 'lldp_syscapabilities'
+
 	# Clear out the config file first
 	echo -n > "$LLDPD_CONF"
 	[ -n "$ifnames" ] && echo "configure system interface pattern" "$ifnames" >> "$LLDPD_CONF"
 	[ -n "$lldp_description" ] && echo "configure system description" "\"$lldp_description\"" >> "$LLDPD_CONF"
 	[ -n "$lldp_hostname" ] && echo "configure system hostname" "\"$lldp_hostname\"" >> "$LLDPD_CONF"
 	[ -n "$lldp_mgmt_ip" ] && echo "configure system ip management pattern" "\"$lldp_mgmt_ip\"" >> "$LLDPD_CONF"
+	[ -n "$lldp_syscapabilities" ] && echo "configure system capabilities enabled" "\"$lldp_syscapabilities\"" >> "$LLDPD_CONF"
 
 	# Since lldpd's sysconfdir is /tmp, we'll symlink /etc/lldpd.d to /tmp/$LLDPD_CONFS_DIR
 	[ -e $LLDPD_CONFS_DIR ] || ln -s /etc/lldpd.d $LLDPD_CONFS_DIR

target/linux/armsr/Makefile

@@ -15,7 +15,8 @@ include $(INCLUDE_DIR)/target.mk
 
 DEFAULT_PACKAGES += mkf2fs e2fsprogs
 # blkid used for resolving PARTUUID
-# in sysupgrade
+# in sysupgrade. vfat required for
-DEFAULT_PACKAGES += blkid
+# mounting ESP partition
+DEFAULT_PACKAGES += blkid kmod-fs-vfat
 
 $(eval $(call BuildTarget))

target/linux/generic/backport-6.1/020-v6.3-06-BACKPORT-mm-multi-gen-LRU-per-node-lru_gen_folio-lis.patch

@@ -335,7 +335,7 @@ Signed-off-by: T.J. Mercier <tjmercier@google.com>
  	if (order > 0)
  		return 0;
  
-@@ -5373,6 +5386,7 @@ static int mem_cgroup_css_online(struct
+@@ -5383,6 +5396,7 @@ static int mem_cgroup_css_online(struct
  	if (unlikely(mem_cgroup_is_root(memcg)))
  		queue_delayed_work(system_unbound_wq, &stats_flush_dwork,
  				   2UL*HZ);
@@ -343,7 +343,7 @@ Signed-off-by: T.J. Mercier <tjmercier@google.com>
  	return 0;
  offline_kmem:
  	memcg_offline_kmem(memcg);
-@@ -5404,6 +5418,7 @@ static void mem_cgroup_css_offline(struc
+@@ -5414,6 +5428,7 @@ static void mem_cgroup_css_offline(struc
  	memcg_offline_kmem(memcg);
  	reparent_shrinker_deferred(memcg);
  	wb_memcg_offline(memcg);
@@ -351,7 +351,7 @@ Signed-off-by: T.J. Mercier <tjmercier@google.com>
  
  	drain_all_stock(memcg);
  
-@@ -5415,6 +5430,7 @@ static void mem_cgroup_css_released(stru
+@@ -5425,6 +5440,7 @@ static void mem_cgroup_css_released(stru
  	struct mem_cgroup *memcg = mem_cgroup_from_css(css);
  
  	invalidate_reclaim_iterators(memcg);

target/linux/generic/hack-6.1/904-debloat_dma_buf.patch

@@ -64,7 +64,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 +dma-shared-buffer-objs :=  $(dma-buf-objs-y)
 --- a/drivers/dma-buf/dma-buf.c
 +++ b/drivers/dma-buf/dma-buf.c
-@@ -1583,4 +1583,5 @@ static void __exit dma_buf_deinit(void)
+@@ -1636,4 +1636,5 @@ static void __exit dma_buf_deinit(void)
  	kern_unmount(dma_buf_mnt);
  	dma_buf_uninit_sysfs_statistics();
  }

target/linux/generic/pending-6.1/834-ledtrig-libata.patch

@@ -134,7 +134,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  
  /*
   * Define if arch has non-standard setup.  This is a _PCI_ standard
-@@ -857,6 +860,12 @@ struct ata_port {
+@@ -861,6 +864,12 @@ struct ata_port {
  #ifdef CONFIG_ATA_ACPI
  	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
  #endif

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts

@@ -25,6 +25,15 @@
 	model = "Compex WPJ428";
 	compatible = "compex,wpj428";
 
+	chosen {
+		/*
+		 * There's a chance that SPI reads fail even though the data itself is alright.
+		 * The read result is cached and squashfs can't recover.
+		 * Just panic when that happens and hope that next time it doesn't.
+		 */
+		bootargs-append = " rootflags=errors=panic";
+	};
+
 	soc {
 		rng@22000 {
 			status = "okay";

target/linux/ipq806x/config-6.1

@@ -35,9 +35,8 @@ CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_ARM_CPU_SUSPEND=y
 # CONFIG_ARM_CPU_TOPOLOGY is not set
-CONFIG_ARM_CRYPTO=y
 CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_HAS_GROUP_RELOCS=y
 CONFIG_ARM_IPQ806X_FAB_DEVFREQ=y
 CONFIG_ARM_KRAIT_CACHE_DEVFREQ=y
 CONFIG_ARM_L1_CACHE_SHIFT=6
@@ -57,12 +56,18 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_MQ_PCI=y
 CONFIG_BOUNCE=y
 # CONFIG_CACHE_L2X0 is not set
+CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
+CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
+CONFIG_CC_NO_ARRAY_BOUNDS=y
 CONFIG_CLKSRC_QCOM=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_CMDLINE_OVERRIDE=y
 CONFIG_COMMON_CLK=y
 CONFIG_COMMON_CLK_QCOM=y
+CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
 CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CONTEXT_TRACKING=y
+CONFIG_CONTEXT_TRACKING_IDLE=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_CPUFREQ_DT_PLATDEV=y
 CONFIG_CPU_32v6K=y
@@ -74,7 +79,6 @@ CONFIG_CPU_COPY_V6=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
 CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_ATTR_SET=y
 CONFIG_CPU_FREQ_GOV_COMMON=y
@@ -113,15 +117,19 @@ CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_HW=y
 CONFIG_CRYPTO_JITTERENTROPY=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_CRYPTO_LIB_SHA1=y
 CONFIG_CRYPTO_LIB_SHA256=y
+CONFIG_CRYPTO_LIB_UTILS=y
 CONFIG_CRYPTO_LZO=y
 CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_ZSTD=y
+CONFIG_CURRENT_POINTER_IN_TPIDRURO=y
 CONFIG_DCACHE_WORD_ACCESS=y
 CONFIG_DEBUG_GPIO=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
 CONFIG_DEVFREQ_GOV_PASSIVE=y
 # CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
@@ -133,7 +141,6 @@ CONFIG_DMADEVICES=y
 CONFIG_DMA_ENGINE=y
 CONFIG_DMA_OF=y
 CONFIG_DMA_OPS=y
-CONFIG_DMA_REMAP=y
 CONFIG_DMA_VIRTUAL_CHANNELS=y
 CONFIG_DTC=y
 CONFIG_DT_IDLE_STATES=y
@@ -143,10 +150,13 @@ CONFIG_DWMAC_IPQ806X=y
 CONFIG_EDAC_ATOMIC_SCRUB=y
 CONFIG_EDAC_SUPPORT=y
 CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_EXCLUSIVE_SYSTEM_RAM=y
 CONFIG_FIXED_PHY=y
 CONFIG_FIX_EARLYCON_MEM=y
 CONFIG_FWNODE_MDIO=y
 CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_FW_LOADER_SYSFS=y
+CONFIG_GCC11_NO_ARRAY_BOUNDS=y
 CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -179,7 +189,6 @@ CONFIG_GLOB=y
 CONFIG_GPIOLIB_IRQCHIP=y
 CONFIG_GPIO_CDEV=y
 CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
 CONFIG_HARDEN_BRANCH_PREDICTOR=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_HAS_DMA=y
@@ -212,6 +221,7 @@ CONFIG_IPQ_GCC_806X=y
 # CONFIG_IPQ_GCC_8074 is not set
 # CONFIG_IPQ_LCC_806X is not set
 CONFIG_IRQCHIP=y
+CONFIG_IRQSTACKS=y
 CONFIG_IRQ_DOMAIN=y
 CONFIG_IRQ_DOMAIN_HIERARCHY=y
 CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
@@ -322,6 +332,8 @@ CONFIG_OLD_SIGSUSPEND3=y
 CONFIG_PADATA=y
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PAGE_POOL=y
+CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
+CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
 CONFIG_PCI=y
 CONFIG_PCIEAER=y
 CONFIG_PCIEPORTBUS=y
@@ -355,9 +367,7 @@ CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_APQ8064 is not set
 # CONFIG_PINCTRL_APQ8084 is not set
 # CONFIG_PINCTRL_IPQ4019 is not set
-# CONFIG_PINCTRL_IPQ6018 is not set
 CONFIG_PINCTRL_IPQ8064=y
-# CONFIG_PINCTRL_IPQ8074 is not set
 # CONFIG_PINCTRL_MDM9615 is not set
 CONFIG_PINCTRL_MSM=y
 # CONFIG_PINCTRL_MSM8226 is not set
@@ -365,19 +375,9 @@ CONFIG_PINCTRL_MSM=y
 # CONFIG_PINCTRL_MSM8909 is not set
 # CONFIG_PINCTRL_MSM8916 is not set
 # CONFIG_PINCTRL_MSM8960 is not set
-# CONFIG_PINCTRL_MSM8976 is not set
-# CONFIG_PINCTRL_MSM8994 is not set
-# CONFIG_PINCTRL_MSM8996 is not set
-# CONFIG_PINCTRL_MSM8998 is not set
 # CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
 # CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
-# CONFIG_PINCTRL_QCS404 is not set
-# CONFIG_PINCTRL_SC7180 is not set
-# CONFIG_PINCTRL_SDM660 is not set
-# CONFIG_PINCTRL_SDM845 is not set
 # CONFIG_PINCTRL_SDX65 is not set
-# CONFIG_PINCTRL_SM8150 is not set
-# CONFIG_PINCTRL_SM8250 is not set
 CONFIG_PM_DEVFREQ=y
 # CONFIG_PM_DEVFREQ_EVENT is not set
 CONFIG_PM_OPP=y
@@ -385,6 +385,7 @@ CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_MSM=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_PPS=y
+CONFIG_PREEMPT_NONE_BUILD=y
 CONFIG_PRINTK_TIME=y
 CONFIG_PTP_1588_CLOCK=y
 CONFIG_PTP_1588_CLOCK_OPTIONAL=y
@@ -413,6 +414,7 @@ CONFIG_QCOM_SCM=y
 CONFIG_QCOM_SMEM=y
 # CONFIG_QCOM_SMSM is not set
 CONFIG_QCOM_SOCINFO=y
+CONFIG_QCOM_SPM=y
 # CONFIG_QCOM_STATS is not set
 CONFIG_QCOM_TCSR=y
 CONFIG_QCOM_TSENS=y
@@ -420,6 +422,7 @@ CONFIG_QCOM_WDT=y
 # CONFIG_QCS_GCC_404 is not set
 # CONFIG_QCS_Q6SSTOP_404 is not set
 # CONFIG_QCS_TURING_404 is not set
+CONFIG_RANDSTRUCT_NONE=y
 CONFIG_RAS=y
 CONFIG_RATIONAL=y
 CONFIG_RCU_CPU_STALL_TIMEOUT=21
@@ -478,6 +481,7 @@ CONFIG_SMP_ON_UP=y
 # CONFIG_SM_VIDEOCC_8250 is not set
 CONFIG_SOCK_RX_QUEUE_MAPPING=y
 CONFIG_SOC_BUS=y
+CONFIG_SOFTIRQ_ON_OWN_STACK=y
 CONFIG_SPARSE_IRQ=y
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
@@ -501,6 +505,7 @@ CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
 CONFIG_THERMAL_GOV_STEP_WISE=y
 CONFIG_THERMAL_HWMON=y
 CONFIG_THERMAL_OF=y
+CONFIG_THREAD_INFO_IN_TASK=y
 CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_TIMER_OF=y
 CONFIG_TIMER_PROBE=y
@@ -527,5 +532,6 @@ CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_INFLATE=y
+CONFIG_ZSTD_COMMON=y
 CONFIG_ZSTD_COMPRESS=y
 CONFIG_ZSTD_DECOMPRESS=y

target/linux/mediatek/dts/mt7622-buffalo-wsr-2533dhp2.dts

@@ -1,108 +1,20 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
 
-#include "mt7622.dtsi"
+#include "mt7622-buffalo-wsr.dtsi"
-#include "mt6380.dtsi"
 
 / {
 	model = "Buffalo WSR-2533DHP2";
 	compatible = "buffalo,wsr-2533dhp2", "mediatek,mt7622";
 
 	aliases {
-		serial0 = &uart0;
+		label-mac-device = &gmac0;
-		led-boot = &power_green;
-		led-failsafe = &power_amber;
-		led-running = &power_green;
-		led-upgrade = &power_green;
-	};
-
-	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8 swiotlb=512";
 	};
 
 	memory {
 		reg = <0 0x40000000 0 0x0F000000>;
 	};
 
-	leds {
-		compatible = "gpio-leds";
-
-		wireless_amber {
-			label = "amber:wireless";
-			gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_amber: power_amber {
-			label = "amber:power";
-			gpios = <&pio 3 GPIO_ACTIVE_LOW>;
-		};
-
-		power_green: power_green {
-			label = "green:power";
-			gpios = <&pio 4 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		wireless_green {
-			label = "green:wireless";
-			gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		internet {
-			label = "green:internet";
-			gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
-		};
-
-		router {
-			label = "green:router";
-			gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		/* GPIO 1 and 16 are a tri-state switch button with
-		 * ROUTER / AP / WB.
-		 */
-		router {
-			label = "router";
-			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-			linux,input-type = <EV_SW>;
-		};
-
-		bridge {
-			label = "wb";
-			gpios = <&pio 16 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_1>;
-			linux,input-type = <EV_SW>;
-		};
-
-		/* GPIO 18 is a switch button with AUTO / MANUAL. */
-		manual {
-			label = "manual";
-			gpios = <&pio 18 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_2>;
-			linux,input-type = <EV_SW>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&pio 102 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
 	rtkgsw: rtkgsw@0 {
 		compatible = "mediatek,rtk-gsw";
 		mediatek,ethsys = <&ethsys>;
@@ -111,41 +23,7 @@
 	};
 };
 
-&cpu0 {
-	proc-supply = <&mt6380_vcpu_reg>;
-	sram-supply = <&mt6380_vm_reg>;
-};
-
-&cpu1 {
-	proc-supply = <&mt6380_vcpu_reg>;
-	sram-supply = <&mt6380_vm_reg>;
-};
-
-&pcie0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie0_pins>;
-	status = "okay";
-};
-
-&slot0 {
-	status = "okay";
-
-	wifi@0,0 {
-		compatible = "mediatek,mt76";
-		reg = <0x0000 0 0 0 0>;
-		mediatek,mtd-eeprom = <&factory 0x5000>;
-		ieee80211-freq-limit = <5000000 6000000>;
-	};
-};
-
 &pio {
-	eth_pins: eth-pins {
-		mux {
-			function = "eth";
-			groups = "mdc_mdio", "rgmii_via_gmac2";
-		};
-	};
-
 	/* Parallel nand is shared pin with eMMC */
 	parallel_nand_pins: parallel-nand-pins {
 		mux {
@@ -164,75 +42,11 @@
 			bias-pull-up;
 		};
 	};
-
-	pcie0_pins: pcie0-pins {
-		mux {
-			function = "pcie";
-			groups = "pcie0_pad_perst",
-				 "pcie0_1_waken",
-				 "pcie0_1_clkreq";
-		};
 };
 
-	pmic_bus_pins: pmic-bus-pins {
+&gmac0 {
-		mux {
+	nvmem-cells = <&macaddr_factory_4 (-1)>;
-			function = "pmic";
-			groups = "pmic_bus";
-		};
-	};
-
-	pwm7_pins: pwm1-2-pins {
-		mux {
-			function = "pwm";
-			groups = "pwm_ch7_2";
-		};
-	};
-
-	uart0_pins: uart0-pins {
-		mux {
-			function = "uart";
-			groups = "uart0_0_tx_rx" ;
-		};
-	};
-
-	watchdog_pins: watchdog-pins {
-		mux {
-			function = "watchdog";
-			groups = "watchdog";
-		};
-	};
-};
-
-&bch {
-	status = "okay";
-};
-
-&eth {
-	pinctrl-names = "default";
-	pinctrl-0 = <&eth_pins>;
-	status = "okay";
-
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-
-		phy-connection-type = "2500base-x";
-
-		nvmem-cells = <&macaddr_factory_4>;
 	nvmem-cell-names = "mac-address";
-		mac-address-increment = <(-1)>;
-
-		fixed-link {
-			speed = <2500>;
-			full-duplex;
-			pause;
-		};
-	};
-
-	mdio: mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
 };
 
 &nandc {
@@ -273,9 +87,22 @@
 			};
 
 			factory: partition@1c0000 {
+				compatible = "nvmem-cells";
 				label = "factory";
 				reg = <0x1c0000 0x40000>;
 				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_factory_4: macaddr@4 {
+						compatible = "mac-base";
+						reg = <0x4 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
 			};
 
 			partition@200000 {
@@ -304,47 +131,3 @@
 		};
 	};
 };
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm7_pins>;
-	status = "okay";
-};
-
-&pwrap {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pmic_bus_pins>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&watchdog {
-	pinctrl-names = "default";
-	pinctrl-0 = <&watchdog_pins>;
-	status = "okay";
-};
-
-&wmac {
-	status = "okay";
-
-	mediatek,mtd-eeprom = <&factory 0x0>;
-};
-
-&rtc {
-	status = "disabled";
-};
-
-&factory {
-	compatible = "nvmem-cells";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	macaddr_factory_4: macaddr@4 {
-		reg = <0x4 0x6>;
-	};
-};

target/linux/mediatek/dts/mt7622-buffalo-wsr-3200ax4s.dts

@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7622-buffalo-wsr.dtsi"
+
+/ {
+	model = "Buffalo WSR-3200AX4S";
+	compatible = "buffalo,wsr-3200ax4s", "mediatek,mt7622";
+
+	memory {
+		reg = <0 0x40000000 0 0x1f000000>;
+	};
+};
+
+&pio {
+	/* Serial NAND is shared pin with SPI-NOR */
+	serial_nand_pins: serial-nand-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+
+		conf-cmd-dat {
+			pins = "SPI_WP", "SPI_HOLD", "SPI_MOSI",
+			       "SPI_MISO", "SPI_CS";
+			input-enable;
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "SPI_CLK";
+			drive-strength = <16>;
+			bias-pull-down;
+		};
+	};
+};
+
+&mdio {
+	switch@1f {
+		compatible = "mediatek,mt7531";
+		reg = <0x1f>;
+		reset-gpios = <&pio 54 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan3";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac0>;
+				phy-connection-type = "2500base-x";
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+	};
+};
+
+&snfi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&serial_nand_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		nand-ecc-engine = <&snfi>;
+		mediatek,bmt-v2;
+		mediatek,bmt-table-size = <0x1000>;
+		/*
+		 * - Preloader - (kernel (6MiB, in firmware))
+		 * - Kernel2 - WTB
+		 */
+		mediatek,bmt-remap-range = <0x0 0x8c0000>,
+					   <0x1ac0000 0x5200000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "Preloader";
+				reg = <0x0 0x80000>;
+				read-only;
+			};
+
+			partition@80000 {
+				label = "ATF";
+				reg = <0x80000 0x40000>;
+				read-only;
+			};
+
+			partition@c0000 {
+				label = "u-boot";
+				reg = <0xc0000 0x80000>;
+				read-only;
+			};
+
+			partition@140000 {
+				label = "u-boot-env";
+				reg = <0x140000 0x80000>;
+				read-only;
+			};
+
+			factory: partition@1c0000 {
+				label = "factory";
+				reg = <0x1c0000 0x100000>;
+				read-only;
+			};
+
+			partition@2c0000 {
+				compatible = "brcm,trx";
+				brcm,trx-magic = <0x33504844>;
+				label = "firmware";
+				reg = <0x2c0000 0x1800000>;
+			};
+
+			partition@1ac0000 {
+				label = "Kernel2";
+				reg = <0x1ac0000 0x1800000>;
+			};
+
+			partition@32c0000 {
+				label = "glbcfg";
+				reg = <0x32c0000 0x200000>;
+				read-only;
+			};
+
+			partition@34c0000 {
+				label = "board_data";
+				reg = <0x34c0000 0x200000>;
+				read-only;
+			};
+
+			partition@36c0000 {
+				label = "WTB";
+				reg = <0x36c0000 0x3600000>;
+				read-only;
+			};
+		};
+	};
+};

target/linux/mediatek/dts/mt7622-buffalo-wsr.dtsi

@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7622.dtsi"
+#include "mt6380.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		led-boot = &power_green;
+		led-failsafe = &power_amber;
+		led-running = &power_green;
+		led-upgrade = &power_green;
+	};
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8 swiotlb=512";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "amber:wireless";
+			gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_WLAN;
+		};
+
+		power_amber: led-1 {
+			label = "amber:power";
+			gpios = <&pio 3 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_POWER;
+		};
+
+		power_green: led-2 {
+			label = "green:power";
+			gpios = <&pio 4 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+		};
+
+		led-3 {
+			label = "green:wireless";
+			gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+		};
+
+		led-4 {
+			label = "green:internet";
+			gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+		};
+
+		led-5 {
+			label = "green:router";
+			gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-reset {
+			label = "reset";
+			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		/* GPIO 1 and 16 are a tri-state switch button with
+		 * ROUTER / AP / WB.
+		 */
+		key-router {
+			label = "router";
+			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+
+		key-bridge {
+			label = "wb";
+			gpios = <&pio 16 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_1>;
+			linux,input-type = <EV_SW>;
+		};
+
+		/* GPIO 18 is a switch button with AUTO / MANUAL. */
+		key-manual {
+			label = "manual";
+			gpios = <&pio 18 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_2>;
+			linux,input-type = <EV_SW>;
+		};
+
+		key-wps {
+			label = "wps";
+			gpios = <&pio 102 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&cpu0 {
+	proc-supply = <&mt6380_vcpu_reg>;
+	sram-supply = <&mt6380_vm_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6380_vcpu_reg>;
+	sram-supply = <&mt6380_vm_reg>;
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_pins>;
+	status = "okay";
+};
+
+&slot0 {
+	status = "okay";
+
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x5000>;
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&pio {
+	eth_pins: eth-pins {
+		mux {
+			function = "eth";
+			groups = "mdc_mdio", "rgmii_via_gmac2";
+		};
+	};
+
+	pcie0_pins: pcie0-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie0_pad_perst",
+				 "pcie0_1_waken",
+				 "pcie0_1_clkreq";
+		};
+	};
+
+	pmic_bus_pins: pmic-bus-pins {
+		mux {
+			function = "pmic";
+			groups = "pmic_bus";
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		mux {
+			function = "uart";
+			groups = "uart0_0_tx_rx" ;
+		};
+	};
+
+	watchdog_pins: watchdog-pins {
+		mux {
+			function = "watchdog";
+			groups = "watchdog";
+		};
+	};
+};
+
+&eth {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth_pins>;
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+
+		phy-connection-type = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&bch {
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+};
+
+&pwrap {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_bus_pins>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&watchdog {
+	pinctrl-names = "default";
+	pinctrl-0 = <&watchdog_pins>;
+	status = "okay";
+};
+
+&wmac {
+	status = "okay";
+
+	mediatek,mtd-eeprom = <&factory 0x0>;
+};
+
+&rtc {
+	status = "disabled";
+};

target/linux/mediatek/dts/mt7981a-ubnt-unifi-6-plus.dts

@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include "mt7981.dtsi"
+
+/ {
+	model = "Ubiquiti UniFi 6 Plus";
+	compatible = "ubnt,unifi-6-plus", "mediatek,mt7981";
+
+	aliases {
+		serial0 = &uart0;
+		led-boot = &led_white;
+		led-failsafe = &led_white;
+		led-running = &led_blue;
+		led-upgrade = &led_blue;
+		label-mac-device = &gmac1;
+	};
+
+	chosen {
+		bootargs-override = "console=ttyS0,115200n8 rootwait root=/dev/mmcblk0p7";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_blue: dome-blue {
+			label = "blue:dome";
+			gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_white: dome-white {
+			label = "white:dome";
+			gpios = <&pio 34 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&pio {
+	spi2_flash_pins: spi2-pins {
+		mux {
+			function = "spi";
+			groups = "spi2", "spi2_wp_hold";
+		};
+
+		conf-pu {
+			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
+			drive-strength = <8>;
+			bias-pull-up = <103>;
+		};
+
+		conf-pd {
+			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+			drive-strength = <8>;
+			bias-pull-down = <103>;
+		};
+	};
+
+	mmc0_pins_default: mmc0-pins-default {
+		mux {
+			function = "flash";
+			groups = "emmc_45";
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-pins-uhs {
+		mux {
+			function = "flash";
+			groups = "emmc_45";
+		};
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_flash_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-max-frequency = <52000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eeprom: partition@00000 {
+				label = "EEPROM";
+				reg = <0x00000 0x10000>;
+				read-only;
+
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				macaddr_eeprom_0: macaddr@0 {
+					reg = <0x0 0x6>;
+				};
+
+				macaddr_eeprom_6: macaddr@6 {
+					reg = <0x6 0x6>;
+				};
+			};
+
+			partition@10000 {
+				label = "u-boot-env";
+				reg = <0x10000 0x80000>;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <52000000>;
+	cap-mmc-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&eth {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "gmii";
+		phy-handle = <&int_gbe_phy>;
+		nvmem-cell-names = "mac-address";
+		nvmem-cells = <&macaddr_eeprom_0>;
+	};
+};
+
+&wifi {
+	status = "okay";
+};

target/linux/mediatek/filogic/base-files/etc/board.d/02_network

@@ -16,6 +16,7 @@ mediatek_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1
 		;;
 	netgear,wax220|\
+	ubnt,unifi-6-plus|\
 	zyxel,nwa50ax-pro)
 		ucidef_set_interface_lan "eth0"
 		;;

target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata

@@ -14,6 +14,13 @@ case "$FIRMWARE" in
 		;;
 	esac
 	;;
+"mediatek/mt7981_eeprom_mt7976_dbdc.bin")
+	case "$board" in
+	ubnt,unifi-6-plus)
+		caldata_extract_mmc "factory" 0x0 0x1000
+		;;
+	esac
+	;;
 "mediatek/mt7986_eeprom_mt7976.bin")
 	case "$board" in
 	acer,predator-w6)

target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac

@@ -58,6 +58,11 @@ case "$board" in
 		[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
 		[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
 		;;
+	ubnt,unifi-6-plus)
+		addr=$(mtd_get_mac_binary EEPROM 0x6)
+		[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
+		[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
+		;;
 	qihoo,360t7)
 		addr=$(mtd_get_mac_ascii factory lanMac)
 		[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress

target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh

@@ -88,6 +88,11 @@ platform_do_upgrade() {
 		CI_UBIPART="ubi0"
 		nand_do_upgrade "$1"
 		;;
+	ubnt,unifi-6-plus)
+		CI_KERNPART="kernel0"
+		EMMC_ROOT_DEV="$(cmdline_get_var root)"
+		emmc_do_upgrade "$1"
+		;;
 	h3c,magic-nx30-pro|\
 	mediatek,mt7981-rfb|\
 	qihoo,360t7|\
@@ -145,6 +150,9 @@ platform_copy_config() {
 			;;
 		esac
 		;;
+	ubnt,unifi-6-plus)
+		emmc_copy_config
+		;;
 	esac
 }
 

target/linux/mediatek/image/filogic.mk

@@ -521,6 +521,16 @@ define Device/tplink_tl-xdr6088
 endef
 TARGET_DEVICES += tplink_tl-xdr6088
 
+define Device/ubnt_unifi-6-plus
+  DEVICE_VENDOR := Ubiquiti
+  DEVICE_MODEL := UniFi 6 Plus
+  DEVICE_DTS := mt7981a-ubnt-unifi-6-plus
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware e2fsprogs f2fsck mkf2fs fdisk partx-utils
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += ubnt_unifi-6-plus
+
 define Device/xiaomi_mi-router-wr30u-112m-nmbm
   DEVICE_VENDOR := Xiaomi
   DEVICE_MODEL := Mi Router WR30U (112M UBI with NMBM-Enabled layout)

target/linux/mediatek/image/mt7622.mk

@@ -1,24 +1,31 @@
 DTS_DIR := $(DTS_DIR)/mediatek
 
+DEVICE_VARS += BUFFALO_TRX_MAGIC
+
 define Image/Prepare
 	# For UBI we want only one extra block
 	rm -f $(KDIR)/ubi_mark
 	echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
 endef
 
-define Build/buffalo-kernel-trx
+define Build/buffalo-trx
 	$(eval magic=$(word 1,$(1)))
-	$(eval dummy=$(word 2,$(1)))
+	$(eval kern_bin=$(if $(1),$(IMAGE_KERNEL),$@))
+	$(eval rtfs_bin=$(word 2,$(1)))
+	$(eval apnd_bin=$(word 3,$(1)))
 	$(eval kern_size=$(if $(KERNEL_SIZE),$(KERNEL_SIZE),0x400000))
 
-	$(if $(dummy),touch $(dummy))
+	$(if $(rtfs_bin),touch $(rtfs_bin))
 	$(STAGING_DIR_HOST)/bin/otrx create $@.new \
 		$(if $(magic),-M $(magic),) \
-		-f $@ \
+		-f $(kern_bin) \
-		$(if $(dummy),\
+		$(if $(rtfs_bin),\
 			-a 0x20000 \
 			-b $$(( $(subst k, * 1024,$(kern_size)) )) \
-			-f $(dummy),)
+			-f $(rtfs_bin),) \
+		$(if $(apnd_bin),\
+			-A $(apnd_bin) \
+			-a 0x20000)
 	mv $@.new $@
 endef
 
@@ -51,19 +58,6 @@ define Build/mt7622-gpt
 	rm $@.tmp
 endef
 
-define Build/trx-nand
-	# kernel: always use 4 MiB (-28 B or TRX header) to allow upgrades even
-	#	  if it grows up between releases
-	# root: UBI with one extra block containing UBI mark to trigger erasing
-	#	rest of partition
-	$(STAGING_DIR_HOST)/bin/otrx create $@.new \
-		-M 0x32504844 \
-		-f $(IMAGE_KERNEL) -a 0x20000 -b 0x400000 \
-		-f $@ \
-		-A $(KDIR)/ubi_mark -a 0x20000
-	mv $@.new $@
-endef
-
 define Device/bananapi_bpi-r64
   DEVICE_VENDOR := Bananapi
   DEVICE_MODEL := BPi-R64
@@ -103,35 +97,56 @@ define Device/bananapi_bpi-r64
 endef
 TARGET_DEVICES += bananapi_bpi-r64
 
-define Device/buffalo_wsr-2533dhp2
+define Device/buffalo_wsr
   DEVICE_VENDOR := Buffalo
-  DEVICE_MODEL := WSR-2533DHP2
-  DEVICE_DTS := mt7622-buffalo-wsr-2533dhp2
   DEVICE_DTS_DIR := ../dts
-  IMAGE_SIZE := 59392k
+  KERNEL_SIZE := 6144k
-  KERNEL_SIZE := 4096k
   BLOCKSIZE := 128k
   PAGESIZE := 2048
-  SUBPAGESIZE := 512
   UBINIZE_OPTS := -E 5
   BUFFALO_TAG_PLATFORM := MTK
   BUFFALO_TAG_VERSION := 9.99
   BUFFALO_TAG_MINOR := 9.99
   IMAGES += factory.bin factory-uboot.bin
-  KERNEL_INITRAMFS := kernel-bin | lzma | \
+  KERNEL_INITRAMFS = kernel-bin | lzma | \
 	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | \
-	buffalo-kernel-trx
+	buffalo-trx
-  IMAGE/factory.bin := append-ubi | trx-nand | \
+  IMAGE/factory.bin = append-ubi | \
-	buffalo-enc WSR-2533DHP2 $$(BUFFALO_TAG_VERSION) -l | \
+	buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $$$$@ $(KDIR)/ubi_mark | \
-	buffalo-tag-dhp WSR-2533DHP2 JP JP | buffalo-enc-tag -l | buffalo-dhp-image
+	buffalo-enc $$(DEVICE_MODEL) $$(BUFFALO_TAG_VERSION) -l | \
-  IMAGE/factory-uboot.bin := append-ubi | trx-nand
+	buffalo-tag-dhp $$(DEVICE_MODEL) JP JP | buffalo-enc-tag -l | buffalo-dhp-image
-  IMAGE/sysupgrade.bin := append-kernel | \
+  IMAGE/factory-uboot.bin := append-ubi | \
-	buffalo-kernel-trx 0x32504844 $(KDIR)/tmp/$$(DEVICE_NAME).null | \
+	buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $$$$@ $(KDIR)/ubi_mark
+  IMAGE/sysupgrade.bin := \
+	buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $(KDIR)/tmp/$$(DEVICE_NAME).null | \
 	sysupgrade-tar kernel=$$$$@ | append-metadata
+endef
+
+define Device/buffalo_wsr-2533dhp2
+  $(Device/buffalo_wsr)
+  DEVICE_MODEL := WSR-2533DHP2
+  DEVICE_DTS := mt7622-buffalo-wsr-2533dhp2
+  IMAGE_SIZE := 59392k
+  SUBPAGESIZE := 512
+  BUFFALO_TRX_MAGIC := 0x32504844
   DEVICE_PACKAGES := kmod-mt7615-firmware swconfig
+  DEVICE_COMPAT_VERSION := 1.1
+  DEVICE_COMPAT_MESSAGE := Partition table has been changed due to kernel size restrictions. \
+	Please upgrade via sysupgrade with factory-uboot.bin image and '-F' option. \
+	(Warning: your configurations will be erased!)
 endef
 TARGET_DEVICES += buffalo_wsr-2533dhp2
 
+define Device/buffalo_wsr-3200ax4s
+  $(Device/buffalo_wsr)
+  DEVICE_MODEL := WSR-3200AX4S
+  DEVICE_DTS := mt7622-buffalo-wsr-3200ax4s
+  IMAGE_SIZE := 24576k
+  BUFFALO_TRX_MAGIC := 0x33504844
+  DEVICE_PACKAGES := kmod-mt7915-firmware
+endef
+TARGET_DEVICES += buffalo_wsr-3200ax4s
+
 define Device/elecom_wrc-2533gent
   DEVICE_VENDOR := Elecom
   DEVICE_MODEL := WRC-2533GENT

target/linux/mediatek/mt7622/base-files/etc/board.d/02_network

@@ -9,6 +9,7 @@ mediatek_setup_interfaces()
 
 	case $board in
 	bananapi,bpi-r64|\
+	buffalo,wsr-3200ax4s|\
 	elecom,wrc-x3200gst3|\
 	linksys,e8450|\
 	linksys,e8450-ubi|\
@@ -55,6 +56,11 @@ mediatek_setup_macs()
 	local label_mac=""
 
 	case $board in
+	buffalo,wsr-3200ax4s)
+		lan_mac=$(mtd_get_mac_ascii board_data "mac")
+		wan_mac=$lan_mac
+		label_mac=$lan_mac
+		;;
 	reyee,ax3200-e5|\
 	ruijie,rg-ew3200gx-pro)
 		lan_mac=$(macaddr_add $(get_mac_label) 1)

target/linux/mediatek/mt7622/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac

@@ -13,6 +13,11 @@ case "$board" in
 	bananapi,bpi-r64)
 		[ "$PHYNBR" = "0" ] && macaddr_add $(cat /sys/class/net/eth0/address) 2 > /sys${DEVPATH}/macaddress
 		;;
+	buffalo,wsr-3200ax4s)
+		basemac=$(mtd_get_mac_ascii board_data "mac")
+		[ "$PHYNBR" = "0" ] && macaddr_add $basemac 1 > /sys${DEVPATH}/macaddress
+		[ "$PHYNBR" = "1" ] && macaddr_add $basemac 8 > /sys${DEVPATH}/macaddress
+		;;
 	reyee,ax3200-e5|\
 	ruijie,rg-ew3200gx-pro)
 		[ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) 3 > /sys${DEVPATH}/macaddress

target/linux/mediatek/mt7622/base-files/etc/uci-defaults/05_fix-compat-version

@@ -1,7 +1,8 @@
 . /lib/functions.sh
 
 case "$(board_name)" in
-	bananapi,bpi-r64)
+	bananapi,bpi-r64|\
+	buffalo,wsr-2533dhp2)
 	uci set system.@system[0].compat_version="1.1"
 	uci commit system
 	;;

target/linux/mediatek/mt7622/base-files/etc/uci-defaults/09_fix_crc

@@ -7,4 +7,8 @@ buffalo,wsr-2533dhp2)
 	mtd -M 0x44485032 ${kernel_size:+-c 0x$kernel_size} fixtrx firmware && exit 0
 	exit 1
 	;;
+buffalo,wsr-3200ax4s)
+	mtd -M 0x44485033 ${kernel_size:+-c 0x$kernel_size} fixtrx firmware && exit 0
+	exit 1
+	;;
 esac

target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh

@@ -21,7 +21,8 @@ platform_do_upgrade() {
 			;;
 		esac
 		;;
-	buffalo,wsr-2533dhp2)
+	buffalo,wsr-2533dhp2|\
+	buffalo,wsr-3200ax4s)
 		local magic="$(get_magic_long "$1")"
 
 		# use "mtd write" if the magic is "DHP2 (0x44485032)"
@@ -67,7 +68,8 @@ platform_check_image() {
 	[ "$#" -gt 1 ] && return 1
 
 	case "$board" in
-	buffalo,wsr-2533dhp2)
+	buffalo,wsr-2533dhp2|\
+	buffalo,wsr-3200ax4s)
 		buffalo_check_image "$board" "$magic" "$1" || return 1
 		;;
 	elecom,wrc-x3200gst3|\

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-wax620.dts

@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+#include "ipq8074-ess.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Netgear WAX620";
+	compatible = "netgear,wax620", "qcom,ipq8074";
+
+	aliases {
+		serial0 = &blsp1_uart5;
+		ethernet0 = &dp6;
+		led-boot = &led_system_blue;
+		led-failsafe = &led_system_red;
+		led-running = &led_system_green;
+		led-upgrade = &led_system_blue;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		/*
+		 * Netgear's U-Boot adds "ubi.mtd=rootfs root=mtd:ubi_rootfs"
+		 * That fails to create a UBI block device, so add it here.
+		*/
+		bootargs-append = " root=/dev/ubiblock0_1";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	led_spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
+
+		led_gpio: led_gpio@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			registers-number = <1>;
+			enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+			spi-max-frequency = <1000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_system_red: system-red {
+			label = "system:red";
+			gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_system_green: system-green {
+			label = "system:green";
+			gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_system_blue: system-blue {
+			label = "system:blue";
+			gpios = <&tlmm 56 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_lan_g {
+			label = "lan:green";
+			gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_lan_o {
+			label = "lan:orange";
+			gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_2g_b {
+			label = "wlan2g:blue";
+			gpios = <&led_gpio 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_2g_g {
+			label = "wlan2g:green";
+			gpios = <&led_gpio 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_5g_b {
+			label = "wlan5g:blue";
+			gpios = <&led_gpio 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_5g_g {
+			label = "wlan5g:green";
+			gpios = <&led_gpio 5 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+};
+
+&edma {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+
+	switch_cpu_bmp = <0x01>;	
+	switch_lan_bmp = <0x3e>;
+	switch_wan_bmp = <0x40>;
+	switch_mac_mode = <0x00>;
+	switch_mac_mode1 = <0xff>;
+	switch_mac_mode2 = <0x0f>;
+	bm_tick_mode = <0x00>;
+	tm_tick_mode = <0x00>;
+
+	qcom,port_phyinfo {
+		port@5 {
+			port_id = <6>;
+			phy_address = <28>;
+			port_mac_sel = "QGMAC_PORT";
+		};
+	};
+};
+
+&tlmm {
+	mdio_pins: mdio-pins {
+		mdc {
+			pins = "gpio68";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mdio {
+			pins = "gpio69";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+	qca8081_28: ethernet-phy@28 {
+		reg = <28>;
+	};
+};
+
+&dp6 {
+	status = "okay";
+	phy-handle = <&qca8081_28>;
+	label = "lan";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+
+		partitions {
+			compatible = "qcom,smem-part";
+		};
+	};
+};
+
+&blsp1_uart5 {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+
+	qcom,ath11k-calibration-variant = "Netgear-WAX620";
+};

target/linux/qualcommax/image/ipq807x.mk

@@ -115,6 +115,20 @@ define Device/netgear_rax120v2
 endef
 TARGET_DEVICES += netgear_rax120v2
 
+define Device/netgear_wax620
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Netgear
+	DEVICE_MODEL := WAX620
+	DEVICE_DTS_CONFIG := config@hk07
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	SOC := ipq8072
+	DEVICE_PACKAGES += kmod-spi-gpio kmod-gpio-nxp-74hc164 \
+		ipq-wifi-netgear_wax620
+endef
+TARGET_DEVICES += netgear_wax620
+
 define Device/netgear_wax218
 	$(call Device/FitImage)
 	$(call Device/UbiFit)

target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds

@@ -12,6 +12,9 @@ edgecore,eap102)
 netgear,rax120v2)
 	ucidef_set_led_netdev "aqr" "AQR" "white:aqr" "lan5"
 	;;
+netgear,wax620)
+	ucidef_set_led_netdev "lan" "LAN" "lan:green" "lan"
+	;;
 netgear,wax218)
 	ucidef_set_led_netdev "lan" "LAN" "blue:lan" "lan"
 	ucidef_set_led_wlan "wlan5g" "WIFI 5GHz" "blue:wlan5g" "phy0radio"

target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network

@@ -25,7 +25,8 @@ ipq807x_setup_interfaces()
 	netgear,rax120v2)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" "wan"
 		;;
-	netgear,wax218)
+	netgear,wax218|\
+	netgear,wax620)
 		ucidef_set_interface_lan "lan" "dhcp"
 		;;
 	prpl,haze)

target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata

@@ -16,6 +16,7 @@ case "$FIRMWARE" in
 	dynalink,dl-wrx36|\
 	netgear,rax120v2|\
 	netgear,wax218|\
+	netgear,wax620|\
 	qnap,301w|\
 	redmi,ax6|\
 	xiaomi,ax3600|\

target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh

@@ -69,7 +69,8 @@ platform_do_upgrade() {
 	compex,wpq873|\
 	edimax,cax1800|\
 	netgear,rax120v2|\
-	netgear,wax218)
+	netgear,wax218|\
+	netgear,wax620)
 		nand_do_upgrade "$1"
 		;;
 	prpl,haze|\

target/linux/ramips/dts/mt7621_wavlink_wl-wn573hx1.dts

@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "wavlink,wl-wn573hx1", "mediatek,mt7621-soc";
+	model = "WAVLINK WL-WN573HX1";
+
+	aliases {
+		led-boot = &led_status_blue;
+		led-failsafe = &led_status_blue;
+		led-running = &led_status_blue;
+		led-upgrade = &led_status_blue;
+		label-mac-device = &gmac0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status_blue:status_led {
+			label = "blue:status_led";
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&macaddr_factory_3fff4>;
+	nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+	ethphy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie1 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x0>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <14000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000 0x30000>;
+			};
+
+			partition@30000 {
+				label = "config";
+				reg = <0x30000 0x10000>;
+			};
+
+			factory:partition@50000 {
+				label = "factory";
+				reg = <0x50000 0x40000>;
+			};
+
+			partition@90000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x90000 0xf70000>;
+			};
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&macaddr_factory_3fff4>;
+	nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+	ethphy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&switch0 {
+	ports {
+		port@3 {
+			status = "okay";
+			label = "lan";
+		};
+	};
+};
+
+
+&factory {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_factory_3fff4: macaddr@3fff4 {
+		reg = <0x3fff4 0x6>;
+	};
+
+};

target/linux/ramips/image/mt7621.mk

@@ -2546,6 +2546,20 @@ define Device/wavlink_ws-wn572hp3-4g
 endef
 TARGET_DEVICES += wavlink_ws-wn572hp3-4g
 
+
+define Device/wavlink_wl-wn573hx1
+  $(Device/uimage-lzma-loader)
+  IMAGE_SIZE := 15808k
+  DEVICE_VENDOR := Wavlink
+  DEVICE_MODEL := WL-WN573HX1
+  DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
+  IMAGES += factory.bin
+  IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+	check-size | append-metadata
+  IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
+endef
+TARGET_DEVICES += wavlink_wl-wn573hx1
+
 define Device/wevo_11acnas
   $(Device/dsa-migration)
   $(Device/uimage-lzma-loader)

target/linux/ramips/mt7621/base-files/etc/board.d/02_network

@@ -17,6 +17,7 @@ ramips_setup_interfaces()
 	h3c,tx1806|\
 	haier,har-20s2u1|\
 	hiwifi,hc5962|\
+	mercusys,mr70x-v1|\
 	netgear,wax202|\
 	sim,simax1800t|\
 	xiaomi,mi-router-3-pro|\
@@ -55,6 +56,7 @@ ramips_setup_interfaces()
 	ubnt,unifi-flexhd|\
 	ubnt,unifi-nanohd|\
 	yuncore,fap690|\
+	wavlink,wl-wn573hx1|\
 	zyxel,nwa50ax|\
 	zyxel,nwa55axe)
 		ucidef_set_interface_lan "lan"

target/linux/sunxi/Makefile

@@ -6,7 +6,7 @@ include $(TOPDIR)/rules.mk
 
 ARCH:=arm
 BOARD:=sunxi
-BOARDNAME:=Allwinner A1x/A20/A3x/H3/H5/R40
+BOARDNAME:=Allwinner ARM SoCs
 FEATURES:=fpu usb ext4 display rootfs-part rtc squashfs
 SUBTARGETS:=cortexa8 cortexa7 cortexa53
 
@@ -21,6 +21,7 @@ KERNELNAME:=zImage dtbs
 # A80: octa Cortex-A15/A7
 # H3: quad Cortex-A7
 # R40: quad Cortex-A7
+# A64/H5/H6/H616: quad Cortex-A53
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/sunxi/cortexa53/target.mk

@@ -5,6 +5,6 @@
 include $(TOPDIR)/rules.mk
 
 ARCH:=aarch64
-BOARDNAME:=Allwinner A64/H5
+BOARDNAME:=Allwinner A64/H5/H6/H616
 CPU_TYPE:=cortex-a53
 KERNELNAME:=Image dtbs

tools/ccache/Makefile

@@ -21,7 +21,7 @@ CMAKE_HOST_OPTIONS += \
 	-DCMAKE_CXX_COMPILER_LAUNCHER="" \
 	-DCMAKE_SKIP_RPATH=FALSE \
 	-DCMAKE_INSTALL_RPATH="${STAGING_DIR_HOST}/lib" \
-	-DENABLE_DOCUMENTATION=OFF
+	-DENABLE_DOCUMENTATION=OFF \
 	-DREDIS_STORAGE_BACKEND=OFF
 
 $(eval $(call HostBuild))