Difuse/difos
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

imx: 6-12: refresh patches and kernel configs

Browse source 
patches:
 - remove patches from 6.7-6.12 that are now upstream.
 - refresh remaining patches
 - 502-6.13-arm64-dts-freescale-rename-gw7905-to-gw75xx.patch was
   misnamed as that patch went upstream in 6.12 and thus is also removed
 - 504-6.13-arm64-dts-imx-Add-i.MX8M-Plus-Gateworks-GW82XX-2X-support.patch
   was refreshed to the final version that was accepted upstream
 - 600-PCI-imx6-Start-link-at-max-gen-first-for-IMX8MM-and-IMX8MP.patch
   was removed while I investigate an upstream approach for the issue
   it was working around.

configs:
 - config-6.12: unset new configs not needed for all cortexa7/a9/a53
 - cortexa53/config-default: added new CONFIG_PCI_IMX6_HOST config for cortexA53 (IMX8M)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://github.com/openwrt/openwrt/pull/19029
Signed-off-by: Nick Hainke <vincent@systemli.org>
This commit is contained in:
Tim Harvey 2025-06-06 09:04:39 -07:00 committed by Nick Hainke
parent a8feb51e71
commit b0d2b33e3c
21 changed files with 38 additions and 2783 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

11
target/linux/imx/config-6.12
View file

@ -52,11 +52,14 @@ CONFIG_CLKSRC_MMIO=y
# CONFIG_CLK_IMX8MQ is not set
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set
# CONFIG_CLK_IMX95_BLK_CTL is not set
CONFIG_CLONE_BACKWARDS=y
CONFIG_CLZ_TAB=y
CONFIG_ARM64_PLATFORM_DEVICES=y
CONFIG_COMMON_CLK=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_COMPAT_32BIT_TIME=y
# CONFIG_COMPRESSED_INSTALL is not set
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
CONFIG_CPUFREQ_DT=y
@ -167,10 +170,13 @@ CONFIG_DMA_OPS=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
# CONFIG_DRM_DW_HDMI_GP_AUDIO is not set
# CONFIG_DRM_FSL_LDB is not set
# CONFIG_DRM_IMX8MP_DW_HDMI_BRIDGE is not set
# CONFIG_DRM_IMX8MP_HDMI_PVI is not set
# CONFIG_DRM_IMX8QM_LDB is not set
# CONFIG_DRM_IMX8QXP_LDB is not set
# CONFIG_DRM_IMX8QXP_PIXEL_COMBINER is not set
# CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI is not set
# CONFIG_DRM_IMX93_MIPI_DSI is not set
# CONFIG_DRM_IMX_LCDC is not set
CONFIG_DTC=y
CONFIG_EDAC_ATOMIC_SCRUB=y
@ -348,6 +354,7 @@ CONFIG_PHYLIB=y
CONFIG_PHYLINK=y
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_IMX8ULP is not set
# CONFIG_PINCTRL_IMX91 is not set
# CONFIG_PINCTRL_IMX93 is not set
# CONFIG_PINCTRL_IMXRT1050 is not set
# CONFIG_PINCTRL_IMXRT1170 is not set
@ -379,6 +386,10 @@ CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_IMX7 is not set
# CONFIG_RESET_IMX8MP_AUDIOMIX is not set
# CONFIG_PHY_FSL_IMX8QM_HSIO is not set
# CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY is not set
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RTC_CLASS=y

1
target/linux/imx/cortexa53/config-default
View file

@ -118,6 +118,7 @@ CONFIG_PCIE_PME=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_IMX6=y
CONFIG_PCI_IMX6_HOST=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCS_XPCS=y

136
target/linux/imx/patches-6.12/400-6.7-arm64-dts-imx8mp-add-imx8mp-venice-gw74xx-imx219.patch
View file

@ -1,136 +0,0 @@
From 60fd951029603a0a6e019f16d53fb329dbd001f4 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Fri, 7 Jul 2023 16:24:19 -0700
Subject: [PATCH 400/413] 6.7: arm64: dts: imx8mp: add
imx8mp-venice-gw74xx-imx219 overlay for rpi v2 camera
Add support for the RaspberryPi Camera v2 which is an IMX219 8MP module:
- https://datasheets.raspberrypi.com/camera/camera-v2-schematics.pdf
- has its own on-board 24MHz osc so no clock required from baseboard
- pin 11 enables 1.8V and 2.8V LDO which is connected to
GW74xx MIPI_GPIO4 (IMX8MP GPIO1_IO4) so we use this as a gpio
Support is added via a device-tree overlay.
The IMX219 supports RAW8/RAW10 image formats.
Example configuration:
media-ctl -l "'imx219 3-0010':0->'csis-32e40000.csi':0[1]"
media-ctl -v -V "'imx219 3-0010':0 [fmt:SRGGB8/640x480 field:none]"
media-ctl -v -V "'crossbar':0 [fmt:SRGGB8/640x480 field:none]"
media-ctl -v -V "'mxc_isi.0':0 [fmt:SRGGB8/640x480 field:none]"
v4l2-ctl --set-fmt-video=width=640,height=480,pixelformat=RGGB
v4l2-ctl --stream-mmap --stream-to=frame.raw --stream-count=1
convert -size 640x480 -depth 8 gray:frame.raw frame.png
gst-launch-1.0 v4l2src ! \
video/x-bayer,format=rggb,width=640,height=480,framerate=10/1 ! \
bayer2rgb ! fbdevsink
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm64/boot/dts/freescale/Makefile | 2 +
.../imx8mp-venice-gw74xx-imx219.dtso | 80 +++++++++++++++++++
2 files changed, 82 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -159,6 +159,7 @@ imx8mm-venice-gw73xx-0x-rpidsi-dtbs := i
imx8mm-venice-gw73xx-0x-rs232-rts-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs232-rts.dtbo
imx8mm-venice-gw73xx-0x-rs422-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs422.dtbo
imx8mm-venice-gw73xx-0x-rs485-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs485.dtbo
+imx8mp-venice-gw74xx-imx219-dtbs := imx8mp-venice-gw74xx.dtb imx8mp-venice-gw74xx-imx219.dtbo
imx8mp-venice-gw74xx-rpidsi-dtbs := imx8mp-venice-gw74xx.dtb imx8mp-venice-gw74xx-rpidsi.dtbo
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-imx219.dtb
@@ -171,6 +172,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs232-rts.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs422.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs485.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-imx219.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-rpidsi.dtb
dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mp-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ compatible = "gw,imx8mp-gw74xx", "fsl,imx8mp";
+
+ reg_cam: regulator-cam {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_cam>;
+ compatible = "regulator-fixed";
+ regulator-name = "reg_cam";
+ gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ cam24m: cam24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "cam24m";
+ };
+};
+
+&i2c4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imx219: sensor@10 {
+ compatible = "sony,imx219";
+ reg = <0x10>;
+ clocks = <&cam24m>;
+ VDIG-supply = <&reg_cam>;
+
+ port {
+ /* MIPI CSI-2 bus endpoint */
+ imx219_to_mipi_csi2: endpoint {
+ remote-endpoint = <&mipi_csi_0_in>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <456000000>;
+ };
+ };
+ };
+};
+
+&isi_0 {
+ status = "okay";
+};
+
+&mipi_csi_0 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ mipi_csi_0_in: endpoint {
+ remote-endpoint = <&imx219_to_mipi_csi2>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_reg_cam: regcamgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04 0x41
+ >;
+ };
+};

39
target/linux/imx/patches-6.12/401-6.7-arm64-dts-imx8mm-venice-gw73xx-add-TPM-device.patch
View file

@ -1,39 +0,0 @@
From 816e40232faaa4aa0364ca8da7f86eaf27b0d9ff Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Mon, 26 Jun 2023 11:51:13 -0700
Subject: [PATCH 401/413] 6.7: arm64: dts: imx8mm-venice-gw73xx: add TPM device
Add the TPM device found on the GW73xx revision F PCB.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
.../arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -104,8 +104,15 @@
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
- cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+ <&gpio1 10 GPIO_ACTIVE_LOW>;
status = "okay";
+
+ tpm@1 {
+ compatible = "tcg,tpm_tis-spi";
+ reg = <0x1>;
+ spi-max-frequency = <36000000>;
+ };
};
&gpio1 {
@@ -362,6 +369,7 @@
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
+ MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xd6
>;
};

39
target/linux/imx/patches-6.12/402-6.7-arm64-dts-imx8mp-venice-gw73xx-add-TPM-device.patch
View file

@ -1,39 +0,0 @@
From 916ffc08e8cdd3beccd78291eac9dc5592d83de1 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Thu, 24 Aug 2023 11:07:48 -0700
Subject: [PATCH 402/413] 6.7: arm64: dts: imx8mp-venice-gw73xx: add TPM device
Add the TPM device found on the GW73xx revision F PCB.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
.../arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
@@ -95,8 +95,15 @@
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
- cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+ <&gpio1 10 GPIO_ACTIVE_LOW>;
status = "okay";
+
+ tpm@1 {
+ compatible = "tcg,tpm_tis-spi";
+ reg = <0x1>;
+ spi-max-frequency = <36000000>;
+ };
};
&gpio4 {
@@ -327,6 +334,7 @@
MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140
MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140
MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x140
>;
};

39
target/linux/imx/patches-6.12/403-6.8-arm64-dts-imx8mm-venice-gw72xx-add-TPM-device.patch
View file

@ -1,39 +0,0 @@
From 0adf19579692623d9d9202d2868aa7cd81451148 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Thu, 28 Sep 2023 14:10:39 -0700
Subject: [PATCH 403/413] 6.8: arm64: dts: imx8mm-venice-gw72xx: add TPM device
Add the TPM device found on the GW72xx revision F PCB.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
.../arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -84,8 +84,15 @@
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
- cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+ <&gpio1 10 GPIO_ACTIVE_LOW>;
status = "okay";
+
+ tpm@1 {
+ compatible = "tcg,tpm_tis-spi";
+ reg = <0x1>;
+ spi-max-frequency = <36000000>;
+ };
};
&gpio1 {
@@ -313,6 +320,7 @@
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
+ MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xd6
>;
};

39
target/linux/imx/patches-6.12/404-6.8-arm64-dts-imx8mp-venice-gw72xx-add-TPM-device.patch
View file

@ -1,39 +0,0 @@
From 9d3932717327f6086a9a81a41df5bf5250aee782 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Thu, 28 Sep 2023 14:11:01 -0700
Subject: [PATCH 404/413] 6.8: arm64: dts: imx8mp-venice-gw72xx: add TPM device
Add the TPM device found on the GW72xx revision F PCB.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
.../arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
@@ -83,8 +83,15 @@
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
- cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+ <&gpio1 10 GPIO_ACTIVE_LOW>;
status = "okay";
+
+ tpm@1 {
+ compatible = "tcg,tpm_tis-spi";
+ reg = <0x1>;
+ spi-max-frequency = <36000000>;
+ };
};
&gpio4 {
@@ -286,6 +293,7 @@
MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140
MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140
MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x140
>;
};

39
target/linux/imx/patches-6.12/405-6.9-arm64-dts-imx8mm-venice-gw71xx-add-TPM-device.patch
View file

@ -1,39 +0,0 @@
From 6cea7c46172eca323e9ce7e6aab8f8506eb92b4b Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Wed, 29 Nov 2023 09:53:04 -0800
Subject: [PATCH 405/413] 6.9: arm64: dts: imx8mm-venice-gw71xx: add TPM device
Add the TPM device found on the GW71xx revision E PCB.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
.../arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -53,8 +53,15 @@
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
- cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+ <&gpio1 10 GPIO_ACTIVE_LOW>;
status = "okay";
+
+ tpm@1 {
+ compatible = "tcg,tpm_tis-spi";
+ reg = <0x1>;
+ spi-max-frequency = <36000000>;
+ };
};
&gpio1 {
@@ -201,6 +208,7 @@
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
+ MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xd6
>;
};

39
target/linux/imx/patches-6.12/406-6.9-arm64-dts-imx8mp-venice-gw71xx-add-TPM-device.patch
View file

@ -1,39 +0,0 @@
From 9095a68c0b7084a7819e697ef38d0c987531c8ab Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Wed, 29 Nov 2023 17:11:51 -0800
Subject: [PATCH 406/413] 6.9: arm64: dts: imx8mp-venice-gw71xx: add TPM device
Add the TPM device found on the GW71xx revision E PCB.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
.../arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
@@ -48,8 +48,15 @@
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
- cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+ <&gpio1 10 GPIO_ACTIVE_LOW>;
status = "okay";
+
+ tpm@1 {
+ compatible = "tcg,tpm_tis-spi";
+ reg = <0x1>;
+ spi-max-frequency = <36000000>;
+ };
};
&gpio4 {
@@ -217,6 +224,7 @@
MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140
MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140
MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x140
>;
};

34
target/linux/imx/patches-6.12/407-6.9-arm64-dts-imx8mm-venice-gw7901-add-digital-I-O-d.patch
View file

@ -1,34 +0,0 @@
From e5bc89e60590581b0d31e8c6c6361c6caf5583bb Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Tue, 21 Nov 2023 11:12:24 -0800
Subject: [PATCH 407/413] 6.9: arm64: dts: imx8mm-venice-gw7901: add digital
I/O direction control GPIO's
The GW7901 has GPIO's to configure the direction of its isolated
digital I/O signals. Add the GPIO pinmux and line names.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -319,7 +319,7 @@
&gpio4 {
gpio-line-names = "", "", "", "",
- "", "", "uart3_rs232#", "uart3_rs422#",
+ "dig1_ctl", "dig2_ctl", "uart3_rs232#", "uart3_rs422#",
"uart3_rs485#", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "uart4_rs485#", "", "sim1det#", "sim2det#", "";
@@ -842,6 +842,8 @@
pinctrl_hog: hoggrp {
fsl,pins = <
+ MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x40000041 /* DIG1_CTL */
+ MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x40000041 /* DIG2_CTL */
MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* DIG2_OUT */
MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* DIG2_IN */
MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* DIG1_IN */

45
target/linux/imx/patches-6.12/408-6.9-arm64-dts-imx8mm-venice-gw7901-add-TPM-device.patch
View file

@ -1,45 +0,0 @@
From f905e9a03cdf8edf6fa719ba89f37e6138c33834 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Tue, 21 Nov 2023 11:44:38 -0800
Subject: [PATCH 408/413] 6.9: arm64: dts: imx8mm-venice-gw7901: add TPM device
Add the TPM device found on the GW7901 revision D PCB.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -285,7 +285,8 @@
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
- cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>,
+ <&gpio4 24 GPIO_ACTIVE_LOW>;
status = "okay";
flash@0 {
@@ -294,6 +295,12 @@
spi-max-frequency = <40000000>;
status = "okay";
};
+
+ tpm@1 {
+ compatible = "tcg,tpm_tis-spi";
+ reg = <0x1>;
+ spi-max-frequency = <36000000>;
+ };
};
&fec1 {
@@ -989,6 +996,7 @@
MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82
MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82
MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x140
+ MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x140
>;
};

38
target/linux/imx/patches-6.12/409-6.9-arm64-dts-freescale-imx8mp-venice-gw72xx-2x-fix-.patch
View file

@ -1,38 +0,0 @@
From fddb089c2ccfb8bc4bd3aba605f7eadfd9f36cfd Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Wed, 28 Feb 2024 10:22:11 -0800
Subject: [PATCH 409/413] 6.9: arm64: dts: freescale: imx8mp-venice-gw72xx-2x:
fix USB vbus regulator
When using usb-conn-gpio to control USB role and VBUS, the vbus-supply
property must be present in the usb-conn-gpio node. Additionally it
should not be present in the phy node as that isn't what controls vbus
and will upset the use count.
This resolves an issue where VBUS is enabled with OTG in peripheral
mode.
Fixes: 86c43ae03ab9 ("arm64: dts: freescale: Add imx8mp-venice-gw72xx-2x")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
@@ -169,7 +169,6 @@
};
&usb3_phy0 {
- vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};
@@ -189,6 +188,7 @@
pinctrl-0 = <&pinctrl_usbcon1>;
type = "micro";
label = "otg";
+ vbus-supply = <&reg_usb1_vbus>;
id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
};
};

38
target/linux/imx/patches-6.12/410-6.9-arm64-dts-freescale-imx8mp-venice-gw73xx-2x-fix-.patch
View file

@ -1,38 +0,0 @@
From 69e3ce6d0c2f518bf9574112f3d4cc619c38602c Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Wed, 28 Feb 2024 10:24:19 -0800
Subject: [PATCH 410/413] 6.9: arm64: dts: freescale: imx8mp-venice-gw73xx-2x:
fix USB vbus regulator
When using usb-conn-gpio to control USB role and VBUS, the vbus-supply
property must be present in the usb-conn-gpio node. Additionally it
should not be present in the phy node as that isn't what controls vbus
and will upset the use count.
This resolves an issue where VBUS is enabled with OTG in peripheral
mode.
Fixes: 716ced308234 ("arm64: dts: freescale: Add imx8mp-venice-gw73xx-2x")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
@@ -188,7 +188,6 @@
};
&usb3_phy0 {
- vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};
@@ -208,6 +207,7 @@
pinctrl-0 = <&pinctrl_usbcon1>;
type = "micro";
label = "otg";
+ vbus-supply = <&reg_usb1_vbus>;
id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
};
};

30
target/linux/imx/patches-6.12/411-6.10-arm64-dts-imx8mp-venice-gw74xx-add-ADC-rail-for.patch
View file

@ -1,30 +0,0 @@
From 9d75bdd797d32c859d0dd9f54acc30de63831eb1 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Mon, 29 Jan 2024 15:28:39 -0800
Subject: [PATCH 411/413] 6.10: arm64: dts: imx8mp-venice-gw74xx: add ADC rail
for VDD_1P0
The imx8mp-venice-gw74xx revB PCB added an ADC rail for
VDD_1P0. Add it to the GSC ADC rails.
Fixes: 531936b218d8 ("arm64: dts: imx8mp-venice-gw74xx: update to revB PCB")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts | 6 ++++++
1 file changed, 6 insertions(+)
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -391,6 +391,12 @@
label = "vdd_dram";
};
+ channel@9e {
+ gw,mode = <2>;
+ reg = <0x9e>;
+ label = "vdd_1p0";
+ };
+
channel@a2 {
gw,mode = <2>;
reg = <0xa2>;

80
target/linux/imx/patches-6.12/412-6.10-arm64-dts-imx8mp-venice-gw72xx-add-mac-addr-for.patch
View file

@ -1,80 +0,0 @@
From 482fe0cb90d3376051304531a01edccac9ca1868 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Thu, 29 Feb 2024 10:05:26 -0800
Subject: [PATCH 412/413] 6.10: arm64: dts: imx8mp-venice-gw72xx: add mac addr
for eth1
Add the PCI bus topology for eth1 so that boot firmware can set the
local-mac-address property.
The eth1 device is behind a PCI switch:
# lspci -n
00:00.0 0604: 16c3:abcd (rev 01)
01:00.0 0604: 12d8:b404 (rev 01)
02:01.0 0604: 12d8:b404 (rev 01)
02:02.0 0604: 12d8:b404 (rev 01)
02:03.0 0604: 12d8:b404 (rev 01)
05:00.0 0200: 11ab:4380
# lspci -t
-[0000:00]---00.0-[01-ff]----00.0-[02-05]--+-01.0-[03]--
+-02.0-[04]--
\-03.0-[05]----00.0
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
.../dts/freescale/imx8mp-venice-gw72xx.dtsi | 37 +++++++++++++++++++
1 file changed, 37 insertions(+)
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
@@ -8,6 +8,10 @@
#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
+ aliases {
+ ethernet1 = &eth1;
+ };
+
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -137,6 +141,39 @@
pinctrl-0 = <&pinctrl_pcie0>;
reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
status = "okay";
+
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ pcie@3,0 {
+ reg = <0x1800 0 0 0 0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ eth1: ethernet@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+ };
};
/* GPS */

82
target/linux/imx/patches-6.12/413-6.10-arm64-dts-imx8mp-venice-gw73xx-add-mac-addr-for.patch
View file

@ -1,82 +0,0 @@
From caac9b614ee63f875b290fda429706f6ef36e2f1 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Thu, 29 Feb 2024 10:12:49 -0800
Subject: [PATCH 413/413] 6.10: arm64: dts: imx8mp-venice-gw73xx: add mac addr
for eth1
Add the PCI bus topology for eth1 so that boot firmware can set the
local-mac-address property.
The eth1 device is behind a PCI switch:
# lspci -n
00:00.0 0604: 16c3:abcd (rev 01)
01:00.0 0604: 12d8:2608
02:01.0 0604: 12d8:2608
02:02.0 0604: 12d8:2608
02:03.0 0604: 12d8:2608
02:04.0 0604: 12d8:2608
c0:00.0 0200: 1055:7430 (rev 11)
# lspci -t
-[0000:00]---00.0-[01-ff]----00.0-[02-fe]--+-01.0-[03-41]--
+-02.0-[42-80]--
+-03.0-[81-bf]--
\-04.0-[c0-fe]----00.0
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
.../dts/freescale/imx8mp-venice-gw73xx.dtsi | 37 +++++++++++++++++++
1 file changed, 37 insertions(+)
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
@@ -8,6 +8,10 @@
#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
+ aliases {
+ ethernet1 = &eth1;
+ };
+
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -149,6 +153,39 @@
pinctrl-0 = <&pinctrl_pcie0>;
reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
status = "okay";
+
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ pcie@4,0 {
+ reg = <0x2000 0 0 0 0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ eth1: ethernet@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+ };
};
/* GPS */

22
target/linux/imx/patches-6.12/500-6.13-arm64-dts-imx8mm-venice-add-RTC-aliases.patch
View file

@ -23,7 +23,7 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -8,6 +8,11 @@
@@ -9,6 +9,11 @@
#include <dt-bindings/net/ti-dp83867.h>
/ {
@ -35,7 +35,7 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0 0x80000000>;
@@ -272,7 +277,7 @@
@@ -292,7 +297,7 @@
pagesize = <16>;
};
@ -55,7 +55,7 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
usb0 = &usbotg1;
usb1 = &usbotg2;
};
@@ -495,7 +497,7 @@
@@ -497,7 +499,7 @@
pagesize = <16>;
};
@ -75,7 +75,7 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
usb0 = &usbotg1;
usb1 = &usbotg2;
};
@@ -562,7 +564,7 @@
@@ -564,7 +566,7 @@
pagesize = <16>;
};
@ -95,7 +95,7 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
usb0 = &usbotg1;
};
@@ -392,7 +394,7 @@
@@ -394,7 +396,7 @@
pagesize = <16>;
};
@ -118,7 +118,7 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
chosen {
stdout-path = &uart2;
};
@@ -436,7 +441,7 @@
@@ -438,7 +443,7 @@
pagesize = <16>;
};
@ -138,7 +138,7 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
usb0 = &usbotg1;
};
@@ -560,7 +562,7 @@
@@ -562,7 +564,7 @@
pagesize = <16>;
};
@ -149,7 +149,7 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
};
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
@@ -10,6 +10,8 @@
@@ -11,6 +11,8 @@
/ {
aliases {
ethernet0 = &eqos;
@ -158,7 +158,7 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
};
memory@40000000 {
@@ -260,7 +262,7 @@
@@ -280,7 +282,7 @@
pagesize = <16>;
};
@ -169,7 +169,7 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
};
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -24,6 +24,8 @@
@@ -25,6 +25,8 @@
ethernet4 = &lan3;
ethernet5 = &lan4;
ethernet6 = &lan5;
@ -178,7 +178,7 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
};
chosen {
@@ -444,7 +446,7 @@
@@ -481,7 +483,7 @@
pagesize = <16>;
};

4
target/linux/imx/patches-6.12/501-6.13-arm64-dts-imx8mp-venice-gw74xx-add-M2SKT_GPIO10-gpio.patch
View file

@ -17,7 +17,7 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -264,7 +264,7 @@
@@ -301,7 +301,7 @@
&gpio3 {
gpio-line-names =
"", "", "", "", "", "", "m2_rst", "",
@ -26,7 +26,7 @@ Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "";
};
@@ -786,6 +786,7 @@
@@ -818,6 +818,7 @@
MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000150 /* PCIE3_WDIS# */
MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000150 /* PCIE2_WDIS# */
MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000040 /* M2SKT_RST# */

1426
target/linux/imx/patches-6.12/502-6.13-arm64-dts-freescale-rename-gw7905-to-gw75xx.patch
View file

File diff suppressed because it is too large Load diff

519
target/linux/imx/patches-6.12/504-6.13-arm64-dts-imx-Add-i.MX8M-Plus-Gateworks-GW82XX-2X-support.patch
View file

@ -1,11 +1,11 @@
From a79d2638a7150d1605fcadebb6baa36d27cdc48e Mon Sep 17 00:00:00 2001
From 71dbcebc0a091cb2130b91a8ccce4bf734bbf6db Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Thu, 30 May 2024 10:21:45 -0700
Subject: [PATCH] arm64: dts: imx: Add i.MX8M Plus Gateworks GW82XX-2X support
The Gateworks GW82XX-2X is an ARM based single board computer (SBC)
comprised of the i.MX8M Plus based gw702x SoM and the gw82xx
baseboard featuring:
comprised of the i.MX8M Plus based gw702x SoM and the gw82xx baseboard
featuring:
- i.MX8M Plus SoC
- LPDDR4 DRAM
- eMMC FLASH
@ -30,523 +30,30 @@ baseboard featuring:
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
.../devicetree/bindings/arm/fsl.yaml | 1 +
v3:
- use GPIO_ACTIVE_HIGH for regulator and remove unecessary comment
v2:
- remove invalid st,drdy-int-pin from LIS2MDL magnetometer
- remove {adp,hnp,srp}-disable props from USB controller in host mode
(these are only applicable if the controller is in OTG/Peripheral mode)
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../dts/freescale/imx8mm-venice-gw82xx.dtsi | 460 +++++++++++++++
.../boot/dts/freescale/imx8mp-venice-gw82xx-2 | 19 +
.../dts/freescale/imx8mp-venice-gw82xx-2x.dts | 19 +
.../dts/freescale/imx8mp-venice-gw82xx.dtsi | 533 ++++++++++++++++++
6 files changed, 1033 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw82xx.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2
3 files changed, 553 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2x.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx.dtsi
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1037,6 +1037,7 @@ properties:
- gateworks,imx8mp-gw73xx-2x # i.MX8MP Gateworks Board
- gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board
- gateworks,imx8mp-gw75xx-2x # i.MX8MP Gateworks Board
+ - gateworks,imx8mp-gw82xx-2x # i.MX8MP Gateworks Board
- toradex,verdin-imx8mp # Verdin iMX8M Plus Modules
- toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Modules without Wi-Fi / BT
- toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Modules
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -108,6 +108,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-
@@ -187,6 +187,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw73xx-2x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw75xx-2x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw82xx-2x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw82xx.dtsi
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+ aliases {
+ ethernet1 = &eth1;
+ usb0 = &usbotg1;
+ usb1 = &usbotg2;
+ };
+
+ led-controller {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led-0 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pps>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb1_en>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usb_otg2_vbus: regulator-usb-otg2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb2_en>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg2_vbus";
+ gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_wifi_en: regulator-wifi-en {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_wl>;
+ compatible = "regulator-fixed";
+ regulator-name = "wl";
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <100>;
+ enable-active-high;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+/* off-board header */
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+ <&gpio1 10 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ tpm@1 {
+ compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+ reg = <0x1>;
+ spi-max-frequency = <36000000>;
+ };
+};
+
+&gpio1 {
+ gpio-line-names = "rs485_term", "mipi_gpio4", "", "",
+ "", "", "pci_usb_sel", "dio0",
+ "", "dio1", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2",
+ "mipi_gpio1", "", "", "pci_wdis#",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ accelerometer@19 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_accel>;
+ compatible = "st,lis2de12";
+ reg = <0x19>;
+ st,drdy-int-pin = <1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ // TODO: 0x6f PCIe switch
+};
+
+/* off-board header */
+// TODO: i2c expander
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&pcie_phy {
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ fsl,clkreq-unsupported;
+ clocks = <&pcie0_refclk>;
+ clock-names = "ref";
+ status = "okay";
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+ <&clk IMX8MM_CLK_PCIE1_AUX>;
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_CTRL>;
+ assigned-clock-rates = <10000000>, <250000000>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+ <&clk IMX8MM_SYS_PLL2_250M>;
+ status = "okay";
+
+ // TODO: this changes - new switch
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ pcie@4,0 {
+ reg = <0x2000 0 0 0 0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ eth1: ethernet@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+ };
+};
+
+/* off-board header */
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
+/* GPS */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+/* bluetooth HCI */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
+ cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+ rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+/* RS232 */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ over-current-active-low;
+ vbus-supply = <&reg_usb_otg1_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ vbus-supply = <&reg_usb_otg2_vbus>;
+ status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <&reg_wifi_en>;
+ status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <&reg_3p3v>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* PLUG_TEST */
+ MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* PCI_USBSEL */
+ MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* PCIE_WDIS# */
+ MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIO0 */
+ MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000041 /* DIO1 */
+ MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000104 /* RS485_TERM */
+ MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x40000104 /* RS485 */
+ MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x40000104 /* RS485_HALF */
+ >;
+ };
+
+ pinctrl_accel: accelgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x159
+ >;
+ };
+
+ pinctrl_bten: btengrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x19
+ MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x19
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_pcie0: pcie0grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x41
+ >;
+ };
+
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41
+ >;
+ };
+
+ pinctrl_reg_wl: regwlgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x41
+ >;
+ };
+
+ pinctrl_reg_usb1_en: regusb1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41
+ MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41
+ >;
+ };
+
+ pinctrl_reg_usb2_en: regusb2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
+ MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
+ MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
+ MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
+ MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6
+ >;
+ };
+
+ pinctrl_spi2: spi2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
+ MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
+ MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
+ MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
+ MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xd6
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
+ MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
+ MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
+ MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x140
+ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x140
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
+ MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
+ MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
+ MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
+ MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
+ MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
+ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4
+ MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x1d0
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-venice-gw700x.dtsi"
+#include "imx8mm-venice-gw82xx.dtsi"
+
+/ {
+ model = "Gateworks Venice GW82xx-0x i.MX8MM Development Kit";
+ compatible = "gw,imx8mm-gw82xx-0x", "fsl,imx8mm";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+};
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-mallow.dtb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2x.dts
@@ -0,0 +1,19 @@

121
target/linux/imx/patches-6.12/600-PCI-imx6-Start-link-at-max-gen-first-for-IMX8MM-and-IMX8MP.patch
View file

@ -1,121 +0,0 @@
From cf983e4a04eecb5be93af7b53cb10805ee448998 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Mon, 21 Aug 2023 09:20:17 -0700
Subject: [PATCH] PCI: imx6: Start link at max gen first for IMX8MM and IMX8MP
commit fa33a6d87eac ("PCI: imx6: Start link in Gen1 before negotiating
for Gen2 mode") started link negotiation at Gen1 before attempting
faster speeds in order to work around an issue with a particular switch
on an IMX6Q SoC.
This behavior is not the norm for PCI link negotiation and it has been
found to cause issues in other cases:
- IMX8MM with PI7C9X2G608GP switch: various endpoints (such as qca988x)
will fail to link more than 50% of the time
- IMX8MP with PI7C9X2G608GP switch: occasionally will fail to link with
switch and cause a CPU hang about 30% of the time
Disable this behavior for IMX8MM and IMX8MP.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 53 ++++++++++++++-------------
1 file changed, 27 insertions(+), 26 deletions(-)
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -60,6 +60,7 @@ enum imx6_pcie_variants {
#define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
#define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE BIT(1)
#define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND BIT(2)
+#define IMX6_PCIE_FLAG_GEN1_LAST BIT(3)
#define IMX6_PCIE_MAX_CLKS 6
@@ -836,26 +837,28 @@ static int imx6_pcie_start_link(struct d
u32 tmp;
int ret;
- /*
- * Force Gen1 operation when starting the link. In case the link is
- * started in Gen2 mode, there is a possibility the devices on the
- * bus will not be detected at all. This happens with PCIe switches.
- */
- dw_pcie_dbi_ro_wr_en(pci);
- tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
- tmp &= ~PCI_EXP_LNKCAP_SLS;
- tmp |= PCI_EXP_LNKCAP_SLS_2_5GB;
- dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
- dw_pcie_dbi_ro_wr_dis(pci);
+ if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_GEN1_LAST)) {
+ /*
+ * Force Gen1 operation when starting the link. In case the link is
+ * started in Gen2 mode, there is a possibility the devices on the
+ * bus will not be detected at all. This happens with PCIe switches.
+ */
+ dw_pcie_dbi_ro_wr_en(pci);
+ tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
+ tmp &= ~PCI_EXP_LNKCAP_SLS;
+ tmp |= PCI_EXP_LNKCAP_SLS_2_5GB;
+ dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
+ dw_pcie_dbi_ro_wr_dis(pci);
+ }
/* Start LTSSM. */
imx6_pcie_ltssm_enable(dev);
- ret = dw_pcie_wait_for_link(pci);
- if (ret)
- goto err_reset_phy;
+ if ((pci->link_gen > 1) && !(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_GEN1_LAST)) {
+ ret = dw_pcie_wait_for_link(pci);
+ if (ret)
+ goto err_reset_phy;
- if (pci->link_gen > 1) {
/* Allow faster modes after the link is up */
dw_pcie_dbi_ro_wr_en(pci);
tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
@@ -889,18 +892,14 @@ static int imx6_pcie_start_link(struct d
goto err_reset_phy;
}
}
-
- /* Make sure link training is finished as well! */
- ret = dw_pcie_wait_for_link(pci);
- if (ret)
- goto err_reset_phy;
- } else {
- dev_info(dev, "Link: Only Gen1 is enabled\n");
}
+ ret = dw_pcie_wait_for_link(pci);
+ if (ret)
+ goto err_reset_phy;
+
imx6_pcie->link_is_up = true;
- tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
- dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS);
+
return 0;
err_reset_phy:
@@ -1457,14 +1456,16 @@ static const struct imx6_pcie_drvdata dr
},
[IMX8MM] = {
.variant = IMX8MM,
- .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+ .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
+ IMX6_PCIE_FLAG_GEN1_LAST,
.gpr = "fsl,imx8mm-iomuxc-gpr",
.clk_names = imx8mm_clks,
.clks_cnt = ARRAY_SIZE(imx8mm_clks),
},
[IMX8MP] = {
.variant = IMX8MP,
- .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+ .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
+ IMX6_PCIE_FLAG_GEN1_LAST,
.gpr = "fsl,imx8mp-iomuxc-gpr",
.clk_names = imx8mm_clks,
.clks_cnt = ARRAY_SIZE(imx8mm_clks),