ramips: mt7620: Enable PHY aneg of Lava LR-25G001
In20b09a2125
Lava LR-25G001 router have problem with two inactive ethernet ports. JBOOT bootloader didn't configure ethernet devices by default. The same situation was there. It is required to enable all phy ports. This is fragment of stock bootlog: switch reg write_athr offset=90, value=2b0 switch reg write_athr offset=8c, value=2b0 switch reg write_athr offset=88, value=2b0 switch reg write_athr offset=84, value=2b0 switch reg write_athr offset=80, value=2b0 This patch adds proper registers configuration ar8337 initvals. 0x2b0 value causes force flow control configuration, 0x1200 was used instead (flow control config auto-neg with phy). [1] When switch is now ok, let's fix port numeration too. Fixes:20b09a2125
("ramips: add support for Lava LR-25G001") [1] https://github.com/openwrt/openwrt/pull/4806#issuecomment-982019858 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
This commit is contained in:
parent
d641a60478
commit
a82fa5bcd4
2 changed files with 6 additions and 7 deletions
|
@ -125,6 +125,11 @@
|
|||
0x04 0x87300000 /* PORT0 PAD MODE CTRL */
|
||||
0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
|
||||
0x7c 0x0000007e /* PORT0_STATUS */
|
||||
0x80 0x00001200 /* PORT1_STATUS */
|
||||
0x84 0x00001200 /* PORT2_STATUS */
|
||||
0x88 0x00001200 /* PORT3_STATUS */
|
||||
0x8c 0x00001200 /* PORT4_STATUS */
|
||||
0x90 0x00001200 /* PORT5_STATUS */
|
||||
0x94 0x00000000 /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
|
|
@ -138,6 +138,7 @@ ramips_setup_interfaces()
|
|||
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
|
||||
;;
|
||||
engenius,esr600|\
|
||||
lava,lr-25g001|\
|
||||
sitecom,wlr-4100-v1-002)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "0@eth0"
|
||||
|
@ -173,13 +174,6 @@ ramips_setup_interfaces()
|
|||
ucidef_add_switch "switch0" \
|
||||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
|
||||
;;
|
||||
lava,lr-25g001)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
|
||||
ucidef_add_switch "switch1" \
|
||||
"5:lan" "6@eth0"
|
||||
ucidef_add_switch_attr "switch1" "enable" "false"
|
||||
;;
|
||||
lenovo,newifi-y1|\
|
||||
xiaomi,miwifi-mini)
|
||||
ucidef_add_switch "switch0" \
|
||||
|
|
Loading…
Reference in a new issue