mediatek: filogic: add support for WAVLINK WL-WN573HX3
The WL-WN573HX3 is an AX3000 outdoor Access Point by WAVLINK,
also sold in Europe as 7Links WLR-1300 (ZX-5612).
Specifications:
- MT7981B + MT7976 AX3000 2x2 DBDC (160 MHz)
- 16 MiB SPI NOR, 256 MiB RAM
- Gigabit ethernet port, 802.3af PoE
- IP67 outdoor case for wall or pole mounting with
four single band RP-SMA fiberglass antennas (8 dBi)
Installation:
- OEM Web UI is at 192.168.30.1 which will forward to
http://netlogin.link (using a captive portal)
- login with default password `admin`
- skip setup wizard by navigating directly to
http://netlogin.link/html/meshUpgrade.html
- upload WN573HX3-sysupgrade.bin
- reset to factory defaults to discard OEM UCI settings
MAC address assignment:
LAN 80:xx:xx:76:xx:25 hw 0x44e
WLAN 2.4G 80:xx:xx:76:xx:27 factory 0x04 (label MAC)
WLAN 5G 82:xx:xx:46:xx:27
pair key 8a:xx:xx:76:xx:27 also on label, not used by OpenWrt
Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
This commit is contained in:
Sebastian Schaper
David Bauer
parent
1227e5f54f
commit
907cb88e10
7 changed files with 217 additions and 3 deletions
|
|
@ -3,7 +3,8 @@ set_preinit_iface() {
|
|||
cudy,m3000-v1|\
|
||||
cudy,tr3000-v1|\
|
||||
glinet,gl-mt3000|\
|
||||
openembed,som7981)
|
||||
openembed,som7981|\
|
||||
wavlink,wl-wn573hx3)
|
||||
ip link set eth1 up
|
||||
ifname=eth1
|
||||
;;
|
||||
|
|
|
|||
188
target/linux/mediatek/dts/mt7981b-wavlink-wl-wn573hx3.dts
Normal file
188
target/linux/mediatek/dts/mt7981b-wavlink-wl-wn573hx3.dts
Normal file
|
|
@ -0,0 +1,188 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7981.dtsi"
|
||||
|
||||
/ {
|
||||
model = "WAVLINK WL-WN573HX3";
|
||||
compatible = "wavlink,wl-wn573hx3", "mediatek,mt7981";
|
||||
|
||||
aliases {
|
||||
label-mac-device = &wifi;
|
||||
|
||||
led-boot = &led_status_blue;
|
||||
led-failsafe = &led_status_blue;
|
||||
led-running = &led_status_blue;
|
||||
led-upgrade = &led_status_blue;
|
||||
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button-reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_status_blue: led-1 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&pio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&int_gbe_phy>;
|
||||
nvmem-cells = <&macaddr_hw_44e 0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@00000 {
|
||||
label = "bl2";
|
||||
reg = <0x00000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@50000 {
|
||||
label = "factory";
|
||||
reg = <0x50000 0xb0000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "fip";
|
||||
reg = <0x100000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@f0000 {
|
||||
compatible = "denx,fit";
|
||||
label = "firmware";
|
||||
reg = <0x180000 0xe00000>;
|
||||
};
|
||||
|
||||
partition@f80000 {
|
||||
label = "hw";
|
||||
reg = <0xf80000 0x80000>;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_hw_44e: macaddr@44e {
|
||||
compatible = "mac-base";
|
||||
reg = <0x44e 0x11>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
spi2_flash_pins: spi2-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi2", "spi2_wp_hold";
|
||||
};
|
||||
|
||||
conf-pu {
|
||||
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up = <103>;
|
||||
};
|
||||
|
||||
conf-pd {
|
||||
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
||||
drive-strength = <8>;
|
||||
bias-pull-down = <103>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&eeprom_factory_0>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
};
|
||||
|
|
@ -44,7 +44,8 @@ bananapi,bpi-r4-poe)
|
|||
ucidef_set_led_netdev "lan2" "lan2" "mt7530-0:02:green:lan" "lan2" "link tx rx"
|
||||
ucidef_set_led_netdev "lan3" "lan3" "mt7530-0:03:green:lan" "lan3" "link tx rx"
|
||||
;;
|
||||
cudy,re3000-v1)
|
||||
cudy,re3000-v1|\
|
||||
wavlink,wl-wn573hx3)
|
||||
ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0" "link tx rx"
|
||||
;;
|
||||
cudy,wr3000-v1)
|
||||
|
|
|
|||
|
|
@ -88,6 +88,7 @@ mediatek_setup_interfaces()
|
|||
cudy,re3000-v1|\
|
||||
netgear,wax220|\
|
||||
ubnt,unifi-6-plus|\
|
||||
wavlink,wl-wn573hx3|\
|
||||
zyxel,nwa50ax-pro)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -186,6 +186,10 @@ case "$board" in
|
|||
addr=$(mtd_get_mac_binary "Factory" 0x4)
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
wavlink,wl-wn573hx3)
|
||||
addr=$(mtd_get_mac_binary factory 0x04)
|
||||
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr -0x300000) > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
zyxel,nwa50ax-pro)
|
||||
hw_mac_addr="$(mtd_get_mac_binary mrd 0x1fff8)"
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
|
||||
|
|
|
|||
|
|
@ -132,7 +132,8 @@ platform_do_upgrade() {
|
|||
;;
|
||||
cudy,re3000-v1|\
|
||||
cudy,wr3000-v1|\
|
||||
yuncore,ax835)
|
||||
yuncore,ax835|\
|
||||
wavlink,wl-wn573hx3)
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
dlink,aquila-pro-ai-m30-a1|\
|
||||
|
|
|
|||
|
|
@ -1678,6 +1678,24 @@ define Device/wavlink_wl-wn586x3
|
|||
endef
|
||||
TARGET_DEVICES += wavlink_wl-wn586x3
|
||||
|
||||
define Device/wavlink_wl-wn573hx3
|
||||
DEVICE_VENDOR := WAVLINK
|
||||
DEVICE_MODEL := WL-WN573HX3
|
||||
DEVICE_ALT0_VENDOR := 7Links
|
||||
DEVICE_ALT0_MODEL := WLR-1300
|
||||
DEVICE_DTS := mt7981b-wavlink-wl-wn573hx3
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_DTS_LOADADDR := 0x47000000
|
||||
IMAGE_SIZE := 14336k
|
||||
KERNEL := kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
||||
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
||||
SUPPORTED_DEVICES += mediatek,mt7981-spim-nor-rfb
|
||||
IMAGES = WN573HX3-sysupgrade.bin
|
||||
IMAGE/WN573HX3-sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += wavlink_wl-wn573hx3
|
||||
|
||||
define Device/xiaomi_mi-router-ax3000t
|
||||
DEVICE_VENDOR := Xiaomi
|
||||
DEVICE_MODEL := Mi Router AX3000T
|
||||
|
|
|
|||
Loading…
Reference in a new issue