ramips: mt76x8: add Teltonika RUT956/RUT906 support
Specification: - MediaTek MT7628AN SoC - 128 MB of RAM EtronTech EM68C16CWQG-25IH - 16MB of Flash Winbond W25Q128 SPI - 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1 - MediaTek MT7628AN 2.4 GHz 802.11n WiFi - Quectel EC25-EUX (RUT956) or Meig SLM770A (RUT906) modem - GNSS - RS232, DB9 connector, Cypress ACM via USB, /dev/ttyACM0 - RS485 /dev/ttyS1 - microSD card slot - 2.0 USB Type-A HOST port - analog 0-24V input (MCP3221) - Relay - 2x Digital input - 2x Digital output - 2x SIM slot (can be swapped via GPIO) - eSIM (depends on hardware configuration, can be swapped via GPIO) GPIO: - 1 button (Reset) - 7 LEDs (power, status green/red, RSSI 1,2,3,4,5) - 5 Modem control (power button, reset, status (v5 hw), SIM select, eSIM select) - 2 Digital input - 2 Digital output - 1 Isolated input - 1 RS485 tx enable - 1 RS485 rx enable - 1 Relay - 1 Data Carrier Detect (DCD) Flashing via OEM WebUI: 1. Download the firmware image *-squashfs-factory.bin 2. Upload firmware image via OEM WebUI firmware update, do not keep settings To revert back to OEM firmware: https://wiki.teltonika-networks.com/view/Bootloader_menu Mobile data connection: Meig SLM770 create proto DHCP interface with usb0 device. Quectel EC25-EUX create proto qmi interface. Signed-off-by: Simonas Tamošaitis <simsasss@gmail.com> Link: https://github.com/openwrt/openwrt/pull/18788 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Simonas Tamošaitis
Hauke Mehrtens
parent
7dd9cf82cd
commit
85e300c93d
6 changed files with 381 additions and 3 deletions
79
target/linux/ramips/dts/mt7628an_teltonika_rut9x6.dts
Normal file
79
target/linux/ramips/dts/mt7628an_teltonika_rut9x6.dts
Normal file
|
|
@ -0,0 +1,79 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7628an_teltonika_rut9xx.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "teltonika,rut9x6", "mediatek,mt7628an-soc";
|
||||
model = "Teltonika RUT956/RUT906";
|
||||
|
||||
gpio-export {
|
||||
gpio_dcd {
|
||||
gpio-export,name = "dcd";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio_hc595 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio_din2 {
|
||||
gpio-export,name = "digital_input2";
|
||||
gpio-export,input = <0>;
|
||||
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
gpio_output2 {
|
||||
gpio-export,name = "digital_output2";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio_hc595 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio_adcin {
|
||||
gpio-export,name = "adc_input";
|
||||
gpio-export,input = <0>;
|
||||
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
gpio_relay {
|
||||
gpio-export,name = "relay";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio_hc595 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio_rs485_rx_en {
|
||||
gpio-export,name = "rs485_rx_enable";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio_hc595 13 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio_rs485_tx_en {
|
||||
gpio-export,name = "rs485_tx_enable";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio_isolated_input {
|
||||
gpio-export,name = "isolated_input";
|
||||
gpio-export,input = <0>;
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c {
|
||||
status = "okay";
|
||||
hwmon@4d {
|
||||
compatible = "mcp3221";
|
||||
reg = <0x4d>;
|
||||
reference-voltage-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
hwmon@48 {
|
||||
compatible = "ti,tla2021";
|
||||
reg = <0x48>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
linux,rs485-enabled-at-boot-time;
|
||||
rs485-rts-delay = <0 0>;
|
||||
rs485-rx-during-tx;
|
||||
status = "okay";
|
||||
};
|
||||
258
target/linux/ramips/dts/mt7628an_teltonika_rut9xx.dtsi
Normal file
258
target/linux/ramips/dts/mt7628an_teltonika_rut9xx.dtsi
Normal file
|
|
@ -0,0 +1,258 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
led-running = &led_power;
|
||||
};
|
||||
|
||||
gpio_spi {
|
||||
compatible = "spi-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
sck-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
|
||||
mosi-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
|
||||
cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
|
||||
num-chipselects = <1>;
|
||||
|
||||
gpio_hc595: gpio_hc595@0 {
|
||||
compatible = "fairchild,74hc595";
|
||||
reg = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
registers-number = <2>;
|
||||
spi-max-frequency = <10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-export {
|
||||
compatible = "gpio-export";
|
||||
|
||||
gpio_modem_reset {
|
||||
gpio-export,name = "modem_reset";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio_hc595 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio_modem_power {
|
||||
gpio-export,name = "modem_power";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio_hc595 10 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio_sim_select {
|
||||
gpio-export,name = "sim_sel";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio_hc595 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
gpio_esim_select {
|
||||
gpio-export,name = "esim_sel";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio_modem_status {
|
||||
gpio-export,name = "modem_status";
|
||||
gpio-export,input = <0>;
|
||||
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
gpio_din1 {
|
||||
gpio-export,name = "digital_input1";
|
||||
gpio-export,input = <0>;
|
||||
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
gpio_dout1 {
|
||||
gpio-export,name = "digital_output1";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio_hc595 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
lan1 {
|
||||
function = LED_FUNCTION_LAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function-enumerator = <1>;
|
||||
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan2 {
|
||||
function = LED_FUNCTION_LAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function-enumerator = <2>;
|
||||
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan3 {
|
||||
function = LED_FUNCTION_LAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function-enumerator = <3>;
|
||||
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan {
|
||||
function = LED_FUNCTION_WAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
modem_status_red {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio_hc595 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
modem_status_green {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio_hc595 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
rssi1{
|
||||
label = "green:rssi-1";
|
||||
gpios = <&gpio_hc595 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
rssi2 {
|
||||
label = "green:rssi-2";
|
||||
gpios = <&gpio_hc595 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
rssi3 {
|
||||
label = "green:rssi-3";
|
||||
gpios = <&gpio_hc595 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
rssi4 {
|
||||
label = "green:rssi-4";
|
||||
gpios = <&gpio_hc595 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
rssi5 {
|
||||
label = "green:rssi-5";
|
||||
gpios = <&gpio_hc595 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_power: power {
|
||||
gpios = <&gpio_hc595 15 GPIO_ACTIVE_LOW>;
|
||||
function = LED_FUNCTION_POWER;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "config";
|
||||
reg = <0x020000 0x010000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_config_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
compatible = "mac-base";
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "factory";
|
||||
reg = <0x030000 0x030000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x20000 0x400>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x060000 0xf10000>;
|
||||
};
|
||||
|
||||
partition@f70000 {
|
||||
label = "event-log";
|
||||
reg = <0xf70000 0x90000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2s", "p4led_an", "p3led_an", "p2led_an", "p1led_an", "p0led_an", "gpio", "wled_an", "perst", "refclk", "spi cs1";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
nvmem-cells = <&eeprom_factory_0>, <&macaddr_config_0 2>;
|
||||
nvmem-cell-names = "eeprom", "mac-address";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
nvmem-cells = <&macaddr_config_0 0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&esw {
|
||||
mediatek,portmap = <0x2f>;
|
||||
};
|
||||
|
|
@ -29,19 +29,21 @@ define Build/ravpower-wd009-factory
|
|||
endef
|
||||
|
||||
define Build/append-teltonika-metadata
|
||||
$(eval model_id=$(1))
|
||||
$(eval model_id=$(word 1,$(1)))
|
||||
$(eval hw_mods=$(subst $(space),$(comma),$(wordlist 2,$(words $(1)),$(1))))
|
||||
|
||||
echo \
|
||||
'{ \
|
||||
"metadata_version": "1.1", \
|
||||
"compat_version": "1.0", \
|
||||
"version": "", \
|
||||
"version": "OpenWrt", \
|
||||
"device_code": [".*"], \
|
||||
"hwver": [".*"], \
|
||||
"batch": [".*"], \
|
||||
"serial": [".*"], \
|
||||
"supported_devices":["teltonika,$(model_id)"], \
|
||||
"hw_support": { }, \
|
||||
"hw_mods": { } \
|
||||
"hw_mods": { $(hw_mods) } \
|
||||
}' | fwtool -I - $@
|
||||
endef
|
||||
|
||||
|
|
@ -636,6 +638,24 @@ define Device/tama_w06
|
|||
endef
|
||||
TARGET_DEVICES += tama_w06
|
||||
|
||||
define Device/teltonika_rut9x6
|
||||
DEVICE_VENDOR := Teltonika
|
||||
DEVICE_MODEL := RUT956
|
||||
DEVICE_ALT0_VENDOR := Teltonika
|
||||
DEVICE_ALT0_MODEL := RUT906
|
||||
IMAGE_SIZE := 15424k
|
||||
BLOCKSIZE := 64k
|
||||
DEVICE_PACKAGES := uqmi kmod-mt76x2 kmod-usb2 kmod-usb-ohci \
|
||||
kmod-usb-serial-option kmod-spi-gpio kmod-gpio-nxp-74hc164 kmod-i2c-mt7628 \
|
||||
kmod-hwmon-mcp3021 kmod-scsi-core kmod-usb-storage kmod-usb-acm kmod-usb-net-cdc-ether
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
||||
append-rootfs | pad-rootfs | check-size | append-teltonika-metadata rut9m \
|
||||
"mod1":"2c7c_6005" "mod2":"TLA2021" "mod3":"CH343" "mod4":"esim" "mod5":"ala440"
|
||||
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += teltonika_rut9x6
|
||||
|
||||
define Device/totolink_a3
|
||||
IMAGE_SIZE := 7936k
|
||||
UIMAGE_NAME := za3
|
||||
|
|
|
|||
|
|
@ -82,6 +82,12 @@ teltonika,rut241)
|
|||
ucidef_set_led_switch "lan" "lan" "green:lan" "switch0" "0x02"
|
||||
ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x01"
|
||||
;;
|
||||
teltonika,rut9x6)
|
||||
ucidef_set_led_switch "lan1" "lan1" "green:lan-1" "switch0" "0x1"
|
||||
ucidef_set_led_switch "lan2" "lan2" "green:lan-2" "switch0" "0x2"
|
||||
ucidef_set_led_switch "lan3" "lan3" "green:lan-3" "switch0" "0x4"
|
||||
ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x10"
|
||||
;;
|
||||
tplink,archer-c20-v4|\
|
||||
tplink,archer-c20-v5|\
|
||||
tplink,tl-wr850n-v2)
|
||||
|
|
|
|||
|
|
@ -179,6 +179,10 @@ ramips_setup_interfaces()
|
|||
ucidef_add_switch "switch0" \
|
||||
"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
|
||||
;;
|
||||
teltonika,rut9x6)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "4:wan" "6t@eth0"
|
||||
;;
|
||||
tplink,archer-mr200-v5|\
|
||||
tplink,archer-mr200-v6)
|
||||
ucidef_add_switch "switch0" \
|
||||
|
|
|
|||
|
|
@ -15,6 +15,17 @@ teltonika,rut241)
|
|||
ucidef_add_gpio_switch "modem_power" "Modem power" "modem_power" "1"
|
||||
ucidef_add_gpio_switch "modem_reset" "Modem reset" "modem_reset" "0"
|
||||
;;
|
||||
teltonika,rut9x6)
|
||||
ucidef_add_gpio_switch "digital_output" "Digital output 1" "digital_output1" "0"
|
||||
ucidef_add_gpio_switch "digital_output" "Digital output 2" "digital_output2" "0"
|
||||
ucidef_add_gpio_switch "rs485_rx_enable" "RS485 RX enable" "rs485_rx_enable" "1"
|
||||
ucidef_add_gpio_switch "rs485_tx_enable" "RS485 TX enable" "rs485_tx_enable" "1"
|
||||
ucidef_add_gpio_switch "modem_power" "Modem power button" "modem_power" "1"
|
||||
ucidef_add_gpio_switch "modem_reset" "Modem reset" "modem_reset" "0"
|
||||
ucidef_add_gpio_switch "sim_sel" "SIM select" "sim_sel" "0"
|
||||
ucidef_add_gpio_switch "esim_sel" "SIM select" "esim_sel" "0"
|
||||
ucidef_add_gpio_switch "relay" "Relay" "relay" "0"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
|
|
|||
Loading…
Reference in a new issue