Difuse/difos
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

ipq40xx: improve ASUS RT-AC58U support

Browse source 
This patch does the following:

- move WiFi LED setup to DTS
- fix LAN/WAN MAC addresses and add label MAC address
- wan5G -> wlan5G, power -> led_power
- increase flash SPI frequency to 30MHz

MAC addresses are stored in Factory partition at:
0x1006: WiFi 2.4GHz, WAN (label_mac)
0x5006: WiFi 5GHz, LAN (label_mac +4)

By improving flash speed,
`time dd if=/dev/mtdblock8 of=/dev/null bs=2k`
is reduced from 7m 10.26s to 5m 9.52s.
Using higher frequencies did not improve speed further.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
This commit is contained in:
Sungbo Eo 2019-12-21 12:43:40 +09:00 committed by Adrian Schmutzler
parent 9b02d32e34
commit 8083969405
4 changed files with 26 additions and 20 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
target/linux/ipq40xx/base-files/etc/board.d/01_leds
View file

@ -15,8 +15,6 @@ alfa-network,ap120c-ac)
ucidef_set_led_netdev "wan" "WAN" "${boardname}:amber:wan" "eth1" ucidef_set_led_netdev "wan" "WAN" "${boardname}:amber:wan" "eth1"
;; ;;
asus,rt-ac58u) asus,rt-ac58u)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2G" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:blue:wlan5G" "phy1tpt"
ucidef_set_led_netdev "wan" "WAN" "${boardname}:blue:wan" "eth1" ucidef_set_led_netdev "wan" "WAN" "${boardname}:blue:wan" "eth1"
ucidef_set_led_switch "lan" "LAN" "${boardname}:blue:lan" "switch0" "0x1e" ucidef_set_led_switch "lan" "LAN" "${boardname}:blue:lan" "switch0" "0x1e"
;; ;;

8
target/linux/ipq40xx/base-files/etc/board.d/02_network
View file

@ -79,12 +79,16 @@ ipq40xx_setup_interfaces()
ipq40xx_setup_macs() ipq40xx_setup_macs()
{ {
local board="$1" local board="$1"
local lan_mac=""
local wan_mac=""
local label_mac=""
case "$board" in case "$board" in
asus,rt-ac58u) asus,rt-ac58u)
CI_UBIPART=UBI_DEV CI_UBIPART=UBI_DEV
wan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006) wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
lan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006) lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
label_mac=$wan_mac
;; ;;
cilab,meshpoint-one) cilab,meshpoint-one)
label_mac=$(mtd_get_mac_binary "ART" 0x1006) label_mac=$(mtd_get_mac_binary "ART" 0x1006)

18
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
View file

@ -15,10 +15,10 @@
}; };
aliases { aliases {
led-boot = &power; led-boot = &led_power;
led-failsafe = &power; led-failsafe = &led_power;
led-running = &power; led-running = &led_power;
led-upgrade = &power; led-upgrade = &led_power;
}; };
chosen { chosen {
@ -137,7 +137,7 @@
leds { leds {
compatible = "gpio-leds"; compatible = "gpio-leds";
power: status { led_power: status {
label = "rt-ac58u:blue:status"; label = "rt-ac58u:blue:status";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
}; };
@ -150,11 +150,13 @@
wlan2G { wlan2G {
label = "rt-ac58u:blue:wlan2G"; label = "rt-ac58u:blue:wlan2G";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
}; };
wan5G { wlan5G {
label = "rt-ac58u:blue:wlan5G"; label = "rt-ac58u:blue:wlan5G";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
}; };
usb { usb {
@ -224,7 +226,7 @@
compatible = "jedec,spi-nor"; compatible = "jedec,spi-nor";
reg = <0>; reg = <0>;
linux,modalias = "m25p80", "mx25l1606e", "n25q128a11"; linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
spi-max-frequency = <24000000>; spi-max-frequency = <30000000>;
partitions { partitions {
compatible = "fixed-partitions"; compatible = "fixed-partitions";
@ -280,7 +282,7 @@
#size-cells = <0>; #size-cells = <0>;
compatible = "spinand,mt29f"; compatible = "spinand,mt29f";
reg = <1>; reg = <1>;
spi-max-frequency = <24000000>; spi-max-frequency = <30000000>;
/* /*
* U-boot looks for "spinand,mt29f" node, * U-boot looks for "spinand,mt29f" node,

18
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
View file

@ -15,10 +15,10 @@
}; };
aliases { aliases {
led-boot = &power; led-boot = &led_power;
led-failsafe = &power; led-failsafe = &led_power;
led-running = &power; led-running = &led_power;
led-upgrade = &power; led-upgrade = &led_power;
}; };
chosen { chosen {
@ -131,7 +131,7 @@
leds { leds {
compatible = "gpio-leds"; compatible = "gpio-leds";
power: status { led_power: status {
label = "rt-ac58u:blue:status"; label = "rt-ac58u:blue:status";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
}; };
@ -144,11 +144,13 @@
wlan2G { wlan2G {
label = "rt-ac58u:blue:wlan2G"; label = "rt-ac58u:blue:wlan2G";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
}; };
wan5G { wlan5G {
label = "rt-ac58u:blue:wlan5G"; label = "rt-ac58u:blue:wlan5G";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
}; };
usb { usb {
@ -216,7 +218,7 @@
compatible = "jedec,spi-nor"; compatible = "jedec,spi-nor";
reg = <0>; reg = <0>;
linux,modalias = "m25p80", "mx25l1606e", "n25q128a11"; linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
spi-max-frequency = <24000000>; spi-max-frequency = <30000000>;
partitions { partitions {
compatible = "fixed-partitions"; compatible = "fixed-partitions";
@ -270,7 +272,7 @@
spi-nand@1 { spi-nand@1 {
compatible = "spi-nand"; compatible = "spi-nand";
reg = <1>; reg = <1>;
spi-max-frequency = <24000000>; spi-max-frequency = <30000000>;
/* /*
* U-boot looks for "spinand,mt29f" node, * U-boot looks for "spinand,mt29f" node,