rockchip: refresh 6.6 patches
Refresh kernel 6.6 patches. Removed backpored patches. Signed-off-by: Antonio Flores <antflores627@gmail.com>
This commit is contained in:
Antonio Flores
Nick Hainke
parent
dcd2367349
commit
728db5ec05
30 changed files with 6 additions and 5000 deletions
|
|
@ -1,60 +0,0 @@
|
||||||
From b75a52b0dda353aeefb4830a320589a363f49579 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Shawn Lin <shawn.lin@rock-chips.com>
|
|
||||||
Date: Thu, 2 Feb 2023 08:35:16 +0800
|
|
||||||
Subject: [PATCH] mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for
|
|
||||||
rockchip platform
|
|
||||||
|
|
||||||
For Rockchip platform, DLL bypass bit and start bit need to be set if
|
|
||||||
DLL is not locked. And adjust pre-change delay to 0x3 for better signal
|
|
||||||
test result.
|
|
||||||
|
|
||||||
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
|
|
||||||
Link: https://lore.kernel.org/r/1675298118-64243-2-git-send-email-shawn.lin@rock-chips.com
|
|
||||||
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
||||||
---
|
|
||||||
drivers/mmc/host/sdhci-of-dwcmshc.c | 13 +++++++++----
|
|
||||||
1 file changed, 9 insertions(+), 4 deletions(-)
|
|
||||||
|
|
||||||
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
|
|
||||||
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
|
|
||||||
@@ -48,6 +48,7 @@
|
|
||||||
#define DWCMSHC_EMMC_DLL_RXCLK_SRCSEL 29
|
|
||||||
#define DWCMSHC_EMMC_DLL_START_POINT 16
|
|
||||||
#define DWCMSHC_EMMC_DLL_INC 8
|
|
||||||
+#define DWCMSHC_EMMC_DLL_BYPASS BIT(24)
|
|
||||||
#define DWCMSHC_EMMC_DLL_DLYENA BIT(27)
|
|
||||||
#define DLL_TXCLK_TAPNUM_DEFAULT 0x10
|
|
||||||
#define DLL_TXCLK_TAPNUM_90_DEGREES 0xA
|
|
||||||
@@ -60,6 +61,7 @@
|
|
||||||
#define DLL_RXCLK_NO_INVERTER 1
|
|
||||||
#define DLL_RXCLK_INVERTER 0
|
|
||||||
#define DLL_CMDOUT_TAPNUM_90_DEGREES 0x8
|
|
||||||
+#define DLL_RXCLK_ORI_GATE BIT(31)
|
|
||||||
#define DLL_CMDOUT_TAPNUM_FROM_SW BIT(24)
|
|
||||||
#define DLL_CMDOUT_SRC_CLK_NEG BIT(28)
|
|
||||||
#define DLL_CMDOUT_EN_SRC_CLK_NEG BIT(29)
|
|
||||||
@@ -234,9 +236,12 @@ static void dwcmshc_rk3568_set_clock(str
|
|
||||||
sdhci_writel(host, extra, reg);
|
|
||||||
|
|
||||||
if (clock <= 52000000) {
|
|
||||||
- /* Disable DLL and reset both of sample and drive clock */
|
|
||||||
- sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_CTRL);
|
|
||||||
- sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_RXCLK);
|
|
||||||
+ /*
|
|
||||||
+ * Disable DLL and reset both of sample and drive clock.
|
|
||||||
+ * The bypass bit and start bit need to be set if DLL is not locked.
|
|
||||||
+ */
|
|
||||||
+ sdhci_writel(host, DWCMSHC_EMMC_DLL_BYPASS | DWCMSHC_EMMC_DLL_START, DWCMSHC_EMMC_DLL_CTRL);
|
|
||||||
+ sdhci_writel(host, DLL_RXCLK_ORI_GATE, DWCMSHC_EMMC_DLL_RXCLK);
|
|
||||||
sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK);
|
|
||||||
sdhci_writel(host, 0, DECMSHC_EMMC_DLL_CMDOUT);
|
|
||||||
/*
|
|
||||||
@@ -279,7 +284,7 @@ static void dwcmshc_rk3568_set_clock(str
|
|
||||||
}
|
|
||||||
|
|
||||||
extra = 0x1 << 16 | /* tune clock stop en */
|
|
||||||
- 0x2 << 17 | /* pre-change delay */
|
|
||||||
+ 0x3 << 17 | /* pre-change delay */
|
|
||||||
0x3 << 19; /* post-change delay */
|
|
||||||
sdhci_writel(host, extra, dwc_priv->vendor_specific_area1 + DWCMSHC_EMMC_ATCTRL);
|
|
||||||
|
|
||||||
|
|
@ -1,52 +0,0 @@
|
||||||
From 49502408007b77ff290ce62e6218cefaeedcb31a Mon Sep 17 00:00:00 2001
|
|
||||||
From: Vasily Khoruzhick <anarsoul@gmail.com>
|
|
||||||
Date: Thu, 9 Mar 2023 17:03:49 -0800
|
|
||||||
Subject: [PATCH] mmc: sdhci-of-dwcmshc: properly determine max clock on
|
|
||||||
Rockchip
|
|
||||||
|
|
||||||
Currently .get_max_clock returns the current clock rate for cclk_emmc
|
|
||||||
on rk35xx, thus max clock gets set to whatever bootloader set it to.
|
|
||||||
|
|
||||||
In case of u-boot, it is intentionally reset to 50 MHz if it boots
|
|
||||||
from eMMC, see mmc_deinit() in u-boot sources. As a result, HS200 and
|
|
||||||
HS400 modes are never selected by Linux, because dwcmshc_rk35xx_postinit
|
|
||||||
clears appropriate caps if host->mmc->f_max is < 52MHz
|
|
||||||
|
|
||||||
cclk_emmc is not a fixed clock on rk35xx, so using
|
|
||||||
sdhci_pltfm_clk_get_max_clock is not appropriate here.
|
|
||||||
|
|
||||||
Implement rk35xx_get_max_clock that returns actual max clock for cclk_emmc.
|
|
||||||
|
|
||||||
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
|
|
||||||
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
|
|
||||||
Link: https://lore.kernel.org/r/20230310010349.509132-1-anarsoul@gmail.com
|
|
||||||
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
||||||
---
|
|
||||||
drivers/mmc/host/sdhci-of-dwcmshc.c | 9 ++++++++-
|
|
||||||
1 file changed, 8 insertions(+), 1 deletion(-)
|
|
||||||
|
|
||||||
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
|
|
||||||
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
|
|
||||||
@@ -126,6 +126,13 @@ static unsigned int dwcmshc_get_max_cloc
|
|
||||||
return pltfm_host->clock;
|
|
||||||
}
|
|
||||||
|
|
||||||
+static unsigned int rk35xx_get_max_clock(struct sdhci_host *host)
|
|
||||||
+{
|
|
||||||
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
||||||
+
|
|
||||||
+ return clk_round_rate(pltfm_host->clk, ULONG_MAX);
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
static void dwcmshc_check_auto_cmd23(struct mmc_host *mmc,
|
|
||||||
struct mmc_request *mrq)
|
|
||||||
{
|
|
||||||
@@ -343,7 +350,7 @@ static const struct sdhci_ops sdhci_dwcm
|
|
||||||
.set_clock = dwcmshc_rk3568_set_clock,
|
|
||||||
.set_bus_width = sdhci_set_bus_width,
|
|
||||||
.set_uhs_signaling = dwcmshc_set_uhs_signaling,
|
|
||||||
- .get_max_clock = sdhci_pltfm_clk_get_max_clock,
|
|
||||||
+ .get_max_clock = rk35xx_get_max_clock,
|
|
||||||
.reset = rk35xx_sdhci_reset,
|
|
||||||
.adma_write_desc = dwcmshc_adma_write_desc,
|
|
||||||
};
|
|
||||||
|
|
@ -1,70 +0,0 @@
|
||||||
From 004589ff9df5b75672a78b6c3c4cba93202b14c9 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Tianling Shen <cnsztl@gmail.com>
|
|
||||||
Date: Sat, 25 Mar 2023 15:40:20 +0800
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: Add FriendlyARM NanoPi R2C
|
|
||||||
|
|
||||||
The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC
|
|
||||||
chip changed from rtl8211e to yt8521s, and otherwise identical to R2S.
|
|
||||||
|
|
||||||
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
|
|
||||||
Link: https://lore.kernel.org/r/20230325074022.9818-3-cnsztl@gmail.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/Makefile | 1 +
|
|
||||||
.../boot/dts/rockchip/rk3328-nanopi-r2c.dts | 40 +++++++++++++++++++
|
|
||||||
2 files changed, 41 insertions(+)
|
|
||||||
create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
|
||||||
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a9
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
|
|
||||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts
|
|
||||||
@@ -0,0 +1,40 @@
|
|
||||||
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
||||||
+/*
|
|
||||||
+ * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd.
|
|
||||||
+ * (http://www.friendlyarm.com)
|
|
||||||
+ *
|
|
||||||
+ * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com>
|
|
||||||
+ */
|
|
||||||
+
|
|
||||||
+/dts-v1/;
|
|
||||||
+#include "rk3328-nanopi-r2s.dts"
|
|
||||||
+
|
|
||||||
+/ {
|
|
||||||
+ model = "FriendlyElec NanoPi R2C";
|
|
||||||
+ compatible = "friendlyarm,nanopi-r2c", "rockchip,rk3328";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&gmac2io {
|
|
||||||
+ phy-handle = <&yt8521s>;
|
|
||||||
+ tx_delay = <0x22>;
|
|
||||||
+ rx_delay = <0x12>;
|
|
||||||
+
|
|
||||||
+ mdio {
|
|
||||||
+ /delete-node/ ethernet-phy@1;
|
|
||||||
+
|
|
||||||
+ yt8521s: ethernet-phy@3 {
|
|
||||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
|
||||||
+ reg = <3>;
|
|
||||||
+
|
|
||||||
+ motorcomm,clk-out-frequency-hz = <125000000>;
|
|
||||||
+ motorcomm,keep-pll-enabled;
|
|
||||||
+ motorcomm,auto-sleep-disabled;
|
|
||||||
+
|
|
||||||
+ pinctrl-0 = <ð_phy_reset_pin>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ reset-assert-us = <10000>;
|
|
||||||
+ reset-deassert-us = <50000>;
|
|
||||||
+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
|
|
@ -1,407 +0,0 @@
|
||||||
From 51712e1d014aaaa4c6e1e7e84932d58b5c0f59ed Mon Sep 17 00:00:00 2001
|
|
||||||
From: Chukun Pan <amadeus@jmu.edu.cn>
|
|
||||||
Date: Sat, 3 Dec 2022 15:41:49 +0800
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: rk3328: Add Orange Pi R1 Plus
|
|
||||||
|
|
||||||
Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong.
|
|
||||||
|
|
||||||
This device is similar to the NanoPi R2S, and has a 16MB
|
|
||||||
SPI NOR (mx25l12805d). The reset button is changed to
|
|
||||||
directly reset the power supply, another detail is that
|
|
||||||
both network ports have independent MAC addresses.
|
|
||||||
|
|
||||||
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
|
|
||||||
Link: https://lore.kernel.org/r/20221203074149.11543-3-amadeus@jmu.edu.cn
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/Makefile | 1 +
|
|
||||||
.../dts/rockchip/rk3328-orangepi-r1-plus.dts | 373 ++++++++++++++++++
|
|
||||||
2 files changed, 374 insertions(+)
|
|
||||||
create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
|
||||||
@@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
|
|
||||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
|
|
||||||
@@ -0,0 +1,373 @@
|
|
||||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
||||||
+/*
|
|
||||||
+ * Based on rk3328-nanopi-r2s.dts, which is:
|
|
||||||
+ * Copyright (c) 2020 David Bauer <mail@david-bauer.net>
|
|
||||||
+ */
|
|
||||||
+
|
|
||||||
+/dts-v1/;
|
|
||||||
+
|
|
||||||
+#include <dt-bindings/gpio/gpio.h>
|
|
||||||
+#include <dt-bindings/leds/common.h>
|
|
||||||
+#include "rk3328.dtsi"
|
|
||||||
+
|
|
||||||
+/ {
|
|
||||||
+ model = "Xunlong Orange Pi R1 Plus";
|
|
||||||
+ compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
|
|
||||||
+
|
|
||||||
+ aliases {
|
|
||||||
+ ethernet1 = &rtl8153;
|
|
||||||
+ mmc0 = &sdmmc;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ chosen {
|
|
||||||
+ stdout-path = "serial2:1500000n8";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ gmac_clk: gmac-clock {
|
|
||||||
+ compatible = "fixed-clock";
|
|
||||||
+ clock-frequency = <125000000>;
|
|
||||||
+ clock-output-names = "gmac_clkin";
|
|
||||||
+ #clock-cells = <0>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ leds {
|
|
||||||
+ compatible = "gpio-leds";
|
|
||||||
+ pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+
|
|
||||||
+ led-0 {
|
|
||||||
+ function = LED_FUNCTION_LAN;
|
|
||||||
+ color = <LED_COLOR_ID_GREEN>;
|
|
||||||
+ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ led-1 {
|
|
||||||
+ function = LED_FUNCTION_STATUS;
|
|
||||||
+ color = <LED_COLOR_ID_RED>;
|
|
||||||
+ gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ linux,default-trigger = "heartbeat";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ led-2 {
|
|
||||||
+ function = LED_FUNCTION_WAN;
|
|
||||||
+ color = <LED_COLOR_ID_GREEN>;
|
|
||||||
+ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_sd: sdmmc-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
|
|
||||||
+ pinctrl-0 = <&sdmmc0m1_pin>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ regulator-name = "vcc_sd";
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ vin-supply = <&vcc_io>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_sys: vcc-sys-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vcc_sys";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <5000000>;
|
|
||||||
+ regulator-max-microvolt = <5000000>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdd_5v_lan: vdd-5v-lan-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ enable-active-high;
|
|
||||||
+ gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ pinctrl-0 = <&lan_vdd_pin>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ regulator-name = "vdd_5v_lan";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ vin-supply = <&vcc_sys>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu0 {
|
|
||||||
+ cpu-supply = <&vdd_arm>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu1 {
|
|
||||||
+ cpu-supply = <&vdd_arm>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu2 {
|
|
||||||
+ cpu-supply = <&vdd_arm>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu3 {
|
|
||||||
+ cpu-supply = <&vdd_arm>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&display_subsystem {
|
|
||||||
+ status = "disabled";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&gmac2io {
|
|
||||||
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
|
|
||||||
+ assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
|
|
||||||
+ clock_in_out = "input";
|
|
||||||
+ phy-handle = <&rtl8211e>;
|
|
||||||
+ phy-mode = "rgmii";
|
|
||||||
+ phy-supply = <&vcc_io>;
|
|
||||||
+ pinctrl-0 = <&rgmiim1_pins>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ snps,aal;
|
|
||||||
+ rx_delay = <0x18>;
|
|
||||||
+ tx_delay = <0x24>;
|
|
||||||
+ status = "okay";
|
|
||||||
+
|
|
||||||
+ mdio {
|
|
||||||
+ compatible = "snps,dwmac-mdio";
|
|
||||||
+ #address-cells = <1>;
|
|
||||||
+ #size-cells = <0>;
|
|
||||||
+
|
|
||||||
+ rtl8211e: ethernet-phy@1 {
|
|
||||||
+ reg = <1>;
|
|
||||||
+ pinctrl-0 = <ð_phy_reset_pin>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ reset-assert-us = <10000>;
|
|
||||||
+ reset-deassert-us = <50000>;
|
|
||||||
+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&i2c1 {
|
|
||||||
+ status = "okay";
|
|
||||||
+
|
|
||||||
+ rk805: pmic@18 {
|
|
||||||
+ compatible = "rockchip,rk805";
|
|
||||||
+ reg = <0x18>;
|
|
||||||
+ interrupt-parent = <&gpio1>;
|
|
||||||
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
|
|
||||||
+ #clock-cells = <1>;
|
|
||||||
+ clock-output-names = "xin32k", "rk805-clkout2";
|
|
||||||
+ gpio-controller;
|
|
||||||
+ #gpio-cells = <2>;
|
|
||||||
+ pinctrl-0 = <&pmic_int_l>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ rockchip,system-power-controller;
|
|
||||||
+ wakeup-source;
|
|
||||||
+
|
|
||||||
+ vcc1-supply = <&vcc_sys>;
|
|
||||||
+ vcc2-supply = <&vcc_sys>;
|
|
||||||
+ vcc3-supply = <&vcc_sys>;
|
|
||||||
+ vcc4-supply = <&vcc_sys>;
|
|
||||||
+ vcc5-supply = <&vcc_io>;
|
|
||||||
+ vcc6-supply = <&vcc_sys>;
|
|
||||||
+
|
|
||||||
+ regulators {
|
|
||||||
+ vdd_log: DCDC_REG1 {
|
|
||||||
+ regulator-name = "vdd_log";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <712500>;
|
|
||||||
+ regulator-max-microvolt = <1450000>;
|
|
||||||
+ regulator-ramp-delay = <12500>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <1000000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdd_arm: DCDC_REG2 {
|
|
||||||
+ regulator-name = "vdd_arm";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <712500>;
|
|
||||||
+ regulator-max-microvolt = <1450000>;
|
|
||||||
+ regulator-ramp-delay = <12500>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <950000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_ddr: DCDC_REG3 {
|
|
||||||
+ regulator-name = "vcc_ddr";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_io: DCDC_REG4 {
|
|
||||||
+ regulator-name = "vcc_io";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <3300000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_18: LDO_REG1 {
|
|
||||||
+ regulator-name = "vcc_18";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <1800000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc18_emmc: LDO_REG2 {
|
|
||||||
+ regulator-name = "vcc18_emmc";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <1800000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdd_10: LDO_REG3 {
|
|
||||||
+ regulator-name = "vdd_10";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1000000>;
|
|
||||||
+ regulator-max-microvolt = <1000000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <1000000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&io_domains {
|
|
||||||
+ pmuio-supply = <&vcc_io>;
|
|
||||||
+ vccio1-supply = <&vcc_io>;
|
|
||||||
+ vccio2-supply = <&vcc18_emmc>;
|
|
||||||
+ vccio3-supply = <&vcc_io>;
|
|
||||||
+ vccio4-supply = <&vcc_io>;
|
|
||||||
+ vccio5-supply = <&vcc_io>;
|
|
||||||
+ vccio6-supply = <&vcc_io>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pinctrl {
|
|
||||||
+ gmac2io {
|
|
||||||
+ eth_phy_reset_pin: eth-phy-reset-pin {
|
|
||||||
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ leds {
|
|
||||||
+ lan_led_pin: lan-led-pin {
|
|
||||||
+ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ sys_led_pin: sys-led-pin {
|
|
||||||
+ rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ wan_led_pin: wan-led-pin {
|
|
||||||
+ rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ lan {
|
|
||||||
+ lan_vdd_pin: lan-vdd-pin {
|
|
||||||
+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pmic {
|
|
||||||
+ pmic_int_l: pmic-int-l {
|
|
||||||
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pwm2 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&sdmmc {
|
|
||||||
+ bus-width = <4>;
|
|
||||||
+ cap-sd-highspeed;
|
|
||||||
+ disable-wp;
|
|
||||||
+ pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ vmmc-supply = <&vcc_sd>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&spi0 {
|
|
||||||
+ status = "okay";
|
|
||||||
+
|
|
||||||
+ flash@0 {
|
|
||||||
+ compatible = "jedec,spi-nor";
|
|
||||||
+ reg = <0>;
|
|
||||||
+ spi-max-frequency = <50000000>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&tsadc {
|
|
||||||
+ rockchip,hw-tshut-mode = <0>;
|
|
||||||
+ rockchip,hw-tshut-polarity = <0>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&u2phy {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&u2phy_host {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&u2phy_otg {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&uart2 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb20_otg {
|
|
||||||
+ dr_mode = "host";
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usbdrd3 {
|
|
||||||
+ dr_mode = "host";
|
|
||||||
+ status = "okay";
|
|
||||||
+ #address-cells = <1>;
|
|
||||||
+ #size-cells = <0>;
|
|
||||||
+
|
|
||||||
+ /* Second port is for USB 3.0 */
|
|
||||||
+ rtl8153: device@2 {
|
|
||||||
+ compatible = "usbbda,8153";
|
|
||||||
+ reg = <2>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb_host0_ehci {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb_host0_ohci {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
|
|
@ -1,71 +0,0 @@
|
||||||
From 387b3bbac5ea6a0a105d685237f033ffe0f184f1 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Tianling Shen <cnsztl@gmail.com>
|
|
||||||
Date: Sat, 25 Mar 2023 15:40:22 +0800
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS
|
|
||||||
|
|
||||||
The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with
|
|
||||||
the on-board NIC chip changed from rtl8211e to yt8531c, and otherwise
|
|
||||||
identical to OrangePi R1 Plus.
|
|
||||||
|
|
||||||
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
|
|
||||||
Link: https://lore.kernel.org/r/20230325074022.9818-5-cnsztl@gmail.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/Makefile | 1 +
|
|
||||||
.../rockchip/rk3328-orangepi-r1-plus-lts.dts | 40 +++++++++++++++++++
|
|
||||||
2 files changed, 41 insertions(+)
|
|
||||||
create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
|
||||||
@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-ev
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
|
|
||||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
|
|
||||||
@@ -0,0 +1,40 @@
|
|
||||||
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
||||||
+/*
|
|
||||||
+ * Copyright (c) 2016 Xunlong Software. Co., Ltd.
|
|
||||||
+ * (http://www.orangepi.org)
|
|
||||||
+ *
|
|
||||||
+ * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com>
|
|
||||||
+ */
|
|
||||||
+
|
|
||||||
+/dts-v1/;
|
|
||||||
+#include "rk3328-orangepi-r1-plus.dts"
|
|
||||||
+
|
|
||||||
+/ {
|
|
||||||
+ model = "Xunlong Orange Pi R1 Plus LTS";
|
|
||||||
+ compatible = "xunlong,orangepi-r1-plus-lts", "rockchip,rk3328";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&gmac2io {
|
|
||||||
+ phy-handle = <&yt8531c>;
|
|
||||||
+ tx_delay = <0x19>;
|
|
||||||
+ rx_delay = <0x05>;
|
|
||||||
+
|
|
||||||
+ mdio {
|
|
||||||
+ /delete-node/ ethernet-phy@1;
|
|
||||||
+
|
|
||||||
+ yt8531c: ethernet-phy@0 {
|
|
||||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
|
||||||
+ reg = <0>;
|
|
||||||
+
|
|
||||||
+ motorcomm,clk-out-frequency-hz = <125000000>;
|
|
||||||
+ motorcomm,keep-pll-enabled;
|
|
||||||
+ motorcomm,auto-sleep-disabled;
|
|
||||||
+
|
|
||||||
+ pinctrl-0 = <ð_phy_reset_pin>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ reset-assert-us = <15000>;
|
|
||||||
+ reset-deassert-us = <50000>;
|
|
||||||
+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
|
|
@ -1,754 +0,0 @@
|
||||||
From c6629b9a6738a64507478527da6c7b83c10a6d2c Mon Sep 17 00:00:00 2001
|
|
||||||
From: Vasily Khoruzhick <anarsoul@gmail.com>
|
|
||||||
Date: Tue, 7 Mar 2023 22:32:40 -0800
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: Add FriendlyElec Nanopi R5S
|
|
||||||
|
|
||||||
FriendlyElec Nanopi R5S is an open-sourced mini IoT gateway device.
|
|
||||||
|
|
||||||
Board Specifications
|
|
||||||
- Rockchip RK3568
|
|
||||||
- 2 or 4GB LPDDR4X
|
|
||||||
- 8GB or 16GB eMMC, SD card slot
|
|
||||||
- GbE LAN (Native)
|
|
||||||
- 2x 2.5G LAN (PCIe)
|
|
||||||
- M.2 Connector
|
|
||||||
- HDMI 2.0, MIPI DSI/CSI
|
|
||||||
- 2xUSB 3.0 Host
|
|
||||||
- USB Type C PD, 5V/9V/12V
|
|
||||||
- GPIO: 12-pin 0.5mm FPC connector
|
|
||||||
|
|
||||||
Based on Tianling Shen's <cnsztl@gmail.com> work.
|
|
||||||
|
|
||||||
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
|
|
||||||
Link: https://lore.kernel.org/r/20230308063240.107178-2-anarsoul@gmail.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/Makefile | 1 +
|
|
||||||
.../boot/dts/rockchip/rk3568-nanopi-r5s.dts | 713 ++++++++++++++++++
|
|
||||||
2 files changed, 714 insertions(+)
|
|
||||||
create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
|
||||||
@@ -74,4 +74,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-ro
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
|
||||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
|
|
||||||
@@ -0,0 +1,713 @@
|
|
||||||
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
||||||
+/*
|
|
||||||
+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
|
|
||||||
+ * (http://www.friendlyelec.com)
|
|
||||||
+ *
|
|
||||||
+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
|
|
||||||
+ */
|
|
||||||
+
|
|
||||||
+/dts-v1/;
|
|
||||||
+#include <dt-bindings/gpio/gpio.h>
|
|
||||||
+#include <dt-bindings/input/input.h>
|
|
||||||
+#include <dt-bindings/leds/common.h>
|
|
||||||
+#include <dt-bindings/pinctrl/rockchip.h>
|
|
||||||
+#include <dt-bindings/soc/rockchip,vop2.h>
|
|
||||||
+#include "rk3568.dtsi"
|
|
||||||
+
|
|
||||||
+/ {
|
|
||||||
+ model = "FriendlyElec NanoPi R5S";
|
|
||||||
+ compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568";
|
|
||||||
+
|
|
||||||
+ aliases {
|
|
||||||
+ ethernet0 = &gmac0;
|
|
||||||
+ mmc0 = &sdmmc0;
|
|
||||||
+ mmc1 = &sdhci;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ chosen: chosen {
|
|
||||||
+ stdout-path = "serial2:1500000n8";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ hdmi-con {
|
|
||||||
+ compatible = "hdmi-connector";
|
|
||||||
+ type = "a";
|
|
||||||
+
|
|
||||||
+ port {
|
|
||||||
+ hdmi_con_in: endpoint {
|
|
||||||
+ remote-endpoint = <&hdmi_out_con>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ gpio-leds {
|
|
||||||
+ compatible = "gpio-leds";
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>;
|
|
||||||
+
|
|
||||||
+ led-lan1 {
|
|
||||||
+ color = <LED_COLOR_ID_GREEN>;
|
|
||||||
+ function = LED_FUNCTION_LAN;
|
|
||||||
+ function-enumerator = <1>;
|
|
||||||
+ gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ led-lan2 {
|
|
||||||
+ color = <LED_COLOR_ID_GREEN>;
|
|
||||||
+ function = LED_FUNCTION_LAN;
|
|
||||||
+ function-enumerator = <2>;
|
|
||||||
+ gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ power_led: led-power {
|
|
||||||
+ color = <LED_COLOR_ID_RED>;
|
|
||||||
+ function = LED_FUNCTION_POWER;
|
|
||||||
+ linux,default-trigger = "heartbeat";
|
|
||||||
+ gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ led-wan {
|
|
||||||
+ color = <LED_COLOR_ID_GREEN>;
|
|
||||||
+ function = LED_FUNCTION_WAN;
|
|
||||||
+ gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdd_usbc: vdd-usbc-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vdd_usbc";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <5000000>;
|
|
||||||
+ regulator-max-microvolt = <5000000>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc3v3_sys: vcc3v3-sys-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vcc3v3_sys";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+ vin-supply = <&vdd_usbc>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc5v0_sys: vcc5v0-sys-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vcc5v0_sys";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <5000000>;
|
|
||||||
+ regulator-max-microvolt = <5000000>;
|
|
||||||
+ vin-supply = <&vdd_usbc>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vcc3v3_pcie";
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+ enable-active-high;
|
|
||||||
+ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ startup-delay-us = <200000>;
|
|
||||||
+ vin-supply = <&vcc5v0_sys>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc5v0_usb: vcc5v0-usb-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vcc5v0_usb";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <5000000>;
|
|
||||||
+ regulator-max-microvolt = <5000000>;
|
|
||||||
+ vin-supply = <&vdd_usbc>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc5v0_usb_host: vcc5v0-usb-host-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ enable-active-high;
|
|
||||||
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&vcc5v0_usb_host_en>;
|
|
||||||
+ regulator-name = "vcc5v0_usb_host";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <5000000>;
|
|
||||||
+ regulator-max-microvolt = <5000000>;
|
|
||||||
+ vin-supply = <&vcc5v0_usb>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ enable-active-high;
|
|
||||||
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&vcc5v0_usb_otg_en>;
|
|
||||||
+ regulator-name = "vcc5v0_usb_otg";
|
|
||||||
+ regulator-min-microvolt = <5000000>;
|
|
||||||
+ regulator-max-microvolt = <5000000>;
|
|
||||||
+ vin-supply = <&vcc5v0_usb>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pcie30_avdd0v9: pcie30-avdd0v9-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "pcie30_avdd0v9";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <900000>;
|
|
||||||
+ regulator-max-microvolt = <900000>;
|
|
||||||
+ vin-supply = <&vcc3v3_sys>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pcie30_avdd1v8: pcie30-avdd1v8-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "pcie30_avdd1v8";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+ vin-supply = <&vcc3v3_sys>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&combphy0 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&combphy1 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&combphy2 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu0 {
|
|
||||||
+ cpu-supply = <&vdd_cpu>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu1 {
|
|
||||||
+ cpu-supply = <&vdd_cpu>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu2 {
|
|
||||||
+ cpu-supply = <&vdd_cpu>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu3 {
|
|
||||||
+ cpu-supply = <&vdd_cpu>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&gmac0 {
|
|
||||||
+ assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
|
|
||||||
+ assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
|
|
||||||
+ assigned-clock-rates = <0>, <125000000>;
|
|
||||||
+ clock_in_out = "output";
|
|
||||||
+ phy-handle = <&rgmii_phy0>;
|
|
||||||
+ phy-mode = "rgmii-id";
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&gmac0_miim
|
|
||||||
+ &gmac0_tx_bus2
|
|
||||||
+ &gmac0_rx_bus2
|
|
||||||
+ &gmac0_rgmii_clk
|
|
||||||
+ &gmac0_rgmii_bus>;
|
|
||||||
+ snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
|
|
||||||
+ snps,reset-active-low;
|
|
||||||
+ /* Reset time is 15ms, 50ms for rtl8211f */
|
|
||||||
+ snps,reset-delays-us = <0 15000 50000>;
|
|
||||||
+ tx_delay = <0x3c>;
|
|
||||||
+ rx_delay = <0x2f>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&gpu {
|
|
||||||
+ mali-supply = <&vdd_gpu>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&hdmi {
|
|
||||||
+ avdd-0v9-supply = <&vdda0v9_image>;
|
|
||||||
+ avdd-1v8-supply = <&vcca1v8_image>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&hdmi_in {
|
|
||||||
+ hdmi_in_vp0: endpoint {
|
|
||||||
+ remote-endpoint = <&vp0_out_hdmi>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&hdmi_out {
|
|
||||||
+ hdmi_out_con: endpoint {
|
|
||||||
+ remote-endpoint = <&hdmi_con_in>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&hdmi_sound {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&i2c0 {
|
|
||||||
+ status = "okay";
|
|
||||||
+
|
|
||||||
+ vdd_cpu: regulator@1c {
|
|
||||||
+ compatible = "tcs,tcs4525";
|
|
||||||
+ reg = <0x1c>;
|
|
||||||
+ fcs,suspend-voltage-selector = <1>;
|
|
||||||
+ regulator-name = "vdd_cpu";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <800000>;
|
|
||||||
+ regulator-max-microvolt = <1150000>;
|
|
||||||
+ regulator-ramp-delay = <2300>;
|
|
||||||
+ vin-supply = <&vcc5v0_sys>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ rk809: pmic@20 {
|
|
||||||
+ compatible = "rockchip,rk809";
|
|
||||||
+ reg = <0x20>;
|
|
||||||
+ interrupt-parent = <&gpio0>;
|
|
||||||
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
|
||||||
+ #clock-cells = <1>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&pmic_int>;
|
|
||||||
+ rockchip,system-power-controller;
|
|
||||||
+ vcc1-supply = <&vcc3v3_sys>;
|
|
||||||
+ vcc2-supply = <&vcc3v3_sys>;
|
|
||||||
+ vcc3-supply = <&vcc3v3_sys>;
|
|
||||||
+ vcc4-supply = <&vcc3v3_sys>;
|
|
||||||
+ vcc5-supply = <&vcc3v3_sys>;
|
|
||||||
+ vcc6-supply = <&vcc3v3_sys>;
|
|
||||||
+ vcc7-supply = <&vcc3v3_sys>;
|
|
||||||
+ vcc8-supply = <&vcc3v3_sys>;
|
|
||||||
+ vcc9-supply = <&vcc3v3_sys>;
|
|
||||||
+ wakeup-source;
|
|
||||||
+
|
|
||||||
+ regulators {
|
|
||||||
+ vdd_logic: DCDC_REG1 {
|
|
||||||
+ regulator-name = "vdd_logic";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-init-microvolt = <900000>;
|
|
||||||
+ regulator-initial-mode = <0x2>;
|
|
||||||
+ regulator-min-microvolt = <500000>;
|
|
||||||
+ regulator-max-microvolt = <1350000>;
|
|
||||||
+ regulator-ramp-delay = <6001>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdd_gpu: DCDC_REG2 {
|
|
||||||
+ regulator-name = "vdd_gpu";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-init-microvolt = <900000>;
|
|
||||||
+ regulator-initial-mode = <0x2>;
|
|
||||||
+ regulator-min-microvolt = <500000>;
|
|
||||||
+ regulator-max-microvolt = <1350000>;
|
|
||||||
+ regulator-ramp-delay = <6001>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_ddr: DCDC_REG3 {
|
|
||||||
+ regulator-name = "vcc_ddr";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-initial-mode = <0x2>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdd_npu: DCDC_REG4 {
|
|
||||||
+ regulator-name = "vdd_npu";
|
|
||||||
+ regulator-init-microvolt = <900000>;
|
|
||||||
+ regulator-initial-mode = <0x2>;
|
|
||||||
+ regulator-min-microvolt = <500000>;
|
|
||||||
+ regulator-max-microvolt = <1350000>;
|
|
||||||
+ regulator-ramp-delay = <6001>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_1v8: DCDC_REG5 {
|
|
||||||
+ regulator-name = "vcc_1v8";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdda0v9_image: LDO_REG1 {
|
|
||||||
+ regulator-name = "vdda0v9_image";
|
|
||||||
+ regulator-min-microvolt = <950000>;
|
|
||||||
+ regulator-max-microvolt = <950000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdda_0v9: LDO_REG2 {
|
|
||||||
+ regulator-name = "vdda_0v9";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <900000>;
|
|
||||||
+ regulator-max-microvolt = <900000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdda0v9_pmu: LDO_REG3 {
|
|
||||||
+ regulator-name = "vdda0v9_pmu";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <900000>;
|
|
||||||
+ regulator-max-microvolt = <900000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <900000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vccio_acodec: LDO_REG4 {
|
|
||||||
+ regulator-name = "vccio_acodec";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vccio_sd: LDO_REG5 {
|
|
||||||
+ regulator-name = "vccio_sd";
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc3v3_pmu: LDO_REG6 {
|
|
||||||
+ regulator-name = "vcc3v3_pmu";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <3300000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcca_1v8: LDO_REG7 {
|
|
||||||
+ regulator-name = "vcca_1v8";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcca1v8_pmu: LDO_REG8 {
|
|
||||||
+ regulator-name = "vcca1v8_pmu";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <1800000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcca1v8_image: LDO_REG9 {
|
|
||||||
+ regulator-name = "vcca1v8_image";
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_3v3: SWITCH_REG1 {
|
|
||||||
+ regulator-name = "vcc_3v3";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc3v3_sd: SWITCH_REG2 {
|
|
||||||
+ regulator-name = "vcc3v3_sd";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&i2c5 {
|
|
||||||
+ status = "okay";
|
|
||||||
+
|
|
||||||
+ hym8563: rtc@51 {
|
|
||||||
+ compatible = "haoyu,hym8563";
|
|
||||||
+ reg = <0x51>;
|
|
||||||
+ interrupt-parent = <&gpio0>;
|
|
||||||
+ interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
|
|
||||||
+ #clock-cells = <0>;
|
|
||||||
+ clock-output-names = "rtcic_32kout";
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&hym8563_int>;
|
|
||||||
+ wakeup-source;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&i2s0_8ch {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&i2s1_8ch {
|
|
||||||
+ rockchip,trcm-sync-tx-only;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&mdio0 {
|
|
||||||
+ rgmii_phy0: ethernet-phy@1 {
|
|
||||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
|
||||||
+ reg = <1>;
|
|
||||||
+ pinctrl-0 = <ð_phy0_reset_pin>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ reset-assert-us = <10000>;
|
|
||||||
+ reset-deassert-us = <50000>;
|
|
||||||
+ reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pcie2x1 {
|
|
||||||
+ num-lanes = <1>;
|
|
||||||
+ reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pcie30phy {
|
|
||||||
+ data-lanes = <1 2>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pcie3x1 {
|
|
||||||
+ num-lanes = <1>;
|
|
||||||
+ reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ vpcie3v3-supply = <&vcc3v3_pcie>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pcie3x2 {
|
|
||||||
+ num-lanes = <1>;
|
|
||||||
+ num-ib-windows = <8>;
|
|
||||||
+ num-ob-windows = <8>;
|
|
||||||
+ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ vpcie3v3-supply = <&vcc3v3_pcie>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pinctrl {
|
|
||||||
+ gmac0 {
|
|
||||||
+ eth_phy0_reset_pin: eth-phy0-reset-pin {
|
|
||||||
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ gpio-leds {
|
|
||||||
+ lan1_led_pin: lan1-led-pin {
|
|
||||||
+ rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ lan2_led_pin: lan2-led-pin {
|
|
||||||
+ rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ power_led_pin: power-led-pin {
|
|
||||||
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ wan_led_pin: wan-led-pin {
|
|
||||||
+ rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ hym8563 {
|
|
||||||
+ hym8563_int: hym8563-int {
|
|
||||||
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pmic {
|
|
||||||
+ pmic_int: pmic-int {
|
|
||||||
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ usb {
|
|
||||||
+ vcc5v0_usb_host_en: vcc5v0-usb-host-en {
|
|
||||||
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
|
|
||||||
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pmu_io_domains {
|
|
||||||
+ pmuio1-supply = <&vcc3v3_pmu>;
|
|
||||||
+ pmuio2-supply = <&vcc3v3_pmu>;
|
|
||||||
+ vccio1-supply = <&vccio_acodec>;
|
|
||||||
+ vccio3-supply = <&vccio_sd>;
|
|
||||||
+ vccio4-supply = <&vcc_1v8>;
|
|
||||||
+ vccio5-supply = <&vcc_3v3>;
|
|
||||||
+ vccio6-supply = <&vcc_1v8>;
|
|
||||||
+ vccio7-supply = <&vcc_3v3>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&saradc {
|
|
||||||
+ vref-supply = <&vcca_1v8>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&sdhci {
|
|
||||||
+ bus-width = <8>;
|
|
||||||
+ max-frequency = <200000000>;
|
|
||||||
+ non-removable;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&sdmmc0 {
|
|
||||||
+ max-frequency = <150000000>;
|
|
||||||
+ no-sdio;
|
|
||||||
+ no-mmc;
|
|
||||||
+ bus-width = <4>;
|
|
||||||
+ cap-mmc-highspeed;
|
|
||||||
+ cap-sd-highspeed;
|
|
||||||
+ disable-wp;
|
|
||||||
+ vmmc-supply = <&vcc3v3_sd>;
|
|
||||||
+ vqmmc-supply = <&vccio_sd>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&tsadc {
|
|
||||||
+ rockchip,hw-tshut-mode = <1>;
|
|
||||||
+ rockchip,hw-tshut-polarity = <0>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&uart2 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb_host0_ehci {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb_host0_ohci {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb_host0_xhci {
|
|
||||||
+ extcon = <&usb2phy0>;
|
|
||||||
+ dr_mode = "host";
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb_host1_ehci {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb_host1_ohci {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb_host1_xhci {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb2phy0 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb2phy0_host {
|
|
||||||
+ phy-supply = <&vcc5v0_usb_host>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb2phy0_otg {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb2phy1 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb2phy1_host {
|
|
||||||
+ phy-supply = <&vcc5v0_usb_otg>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb2phy1_otg {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&vop {
|
|
||||||
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
|
||||||
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&vop_mmu {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&vp0 {
|
|
||||||
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
|
||||||
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
|
||||||
+ remote-endpoint = <&hdmi_in_vp0>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
File diff suppressed because it is too large
Load diff
|
|
@ -1,49 +0,0 @@
|
||||||
From 31425b1fadb2040b359e52ffc24c049a78d56c96 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Tianling Shen <cnsztl@gmail.com>
|
|
||||||
Date: Sat, 18 Mar 2023 16:37:44 +0800
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: fix gmac support for NanoPi R5S
|
|
||||||
|
|
||||||
- Changed phy-mode to rgmii.
|
|
||||||
|
|
||||||
- Fixed pull type in pinctrl for gmac0.
|
|
||||||
|
|
||||||
- Removed duplicate properties in mdio node.
|
|
||||||
These properties are defined in the gmac0 node already.
|
|
||||||
|
|
||||||
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
|
|
||||||
Link: https://lore.kernel.org/r/20230318083745.6181-5-cnsztl@gmail.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 ++-----
|
|
||||||
1 file changed, 2 insertions(+), 5 deletions(-)
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
|
|
||||||
@@ -57,7 +57,7 @@
|
|
||||||
assigned-clock-rates = <0>, <125000000>;
|
|
||||||
clock_in_out = "output";
|
|
||||||
phy-handle = <&rgmii_phy0>;
|
|
||||||
- phy-mode = "rgmii-id";
|
|
||||||
+ phy-mode = "rgmii";
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&gmac0_miim
|
|
||||||
&gmac0_tx_bus2
|
|
||||||
@@ -79,9 +79,6 @@
|
|
||||||
reg = <1>;
|
|
||||||
pinctrl-0 = <ð_phy0_reset_pin>;
|
|
||||||
pinctrl-names = "default";
|
|
||||||
- reset-assert-us = <10000>;
|
|
||||||
- reset-deassert-us = <50000>;
|
|
||||||
- reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
@@ -115,7 +112,7 @@
|
|
||||||
&pinctrl {
|
|
||||||
gmac0 {
|
|
||||||
eth_phy0_reset_pin: eth-phy0-reset-pin {
|
|
||||||
- rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
||||||
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
|
|
@ -1,39 +0,0 @@
|
||||||
From 975e9bbad11950fc8276f1fa260d8bf2c341aa41 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Tianling Shen <cnsztl@gmail.com>
|
|
||||||
Date: Sat, 18 Mar 2023 16:37:45 +0800
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: remove I2S1 TDM node for the NanoPi R5
|
|
||||||
series
|
|
||||||
|
|
||||||
This is for the audio output which does not exist on the boards.
|
|
||||||
Also disable regulator-always-on for vccio_acodec since it's only
|
|
||||||
used by the audio output.
|
|
||||||
|
|
||||||
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
|
|
||||||
Link: https://lore.kernel.org/r/20230318083745.6181-6-cnsztl@gmail.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi | 6 ------
|
|
||||||
1 file changed, 6 deletions(-)
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
|
|
||||||
@@ -330,7 +330,6 @@
|
|
||||||
|
|
||||||
vccio_acodec: LDO_REG4 {
|
|
||||||
regulator-name = "vccio_acodec";
|
|
||||||
- regulator-always-on;
|
|
||||||
regulator-min-microvolt = <3300000>;
|
|
||||||
regulator-max-microvolt = <3300000>;
|
|
||||||
|
|
||||||
@@ -441,11 +440,6 @@
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
-&i2s1_8ch {
|
|
||||||
- rockchip,trcm-sync-tx-only;
|
|
||||||
- status = "okay";
|
|
||||||
-};
|
|
||||||
-
|
|
||||||
&pcie30phy {
|
|
||||||
data-lanes = <1 2>;
|
|
||||||
status = "okay";
|
|
||||||
|
|
@ -1,152 +0,0 @@
|
||||||
From 05620031408ac6cfc6d5c048431827e49aa0ade1 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Tianling Shen <cnsztl@gmail.com>
|
|
||||||
Date: Sat, 18 Mar 2023 16:37:43 +0800
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: Add FriendlyARM NanoPi R5C
|
|
||||||
|
|
||||||
FriendlyARM NanoPi R5C is an open-sourced mini IoT gateway device.
|
|
||||||
|
|
||||||
Specification:
|
|
||||||
- Rockchip RK3568
|
|
||||||
- 1/4GB LPDDR4X RAM
|
|
||||||
- 8/32GB eMMC
|
|
||||||
- SD card slot
|
|
||||||
- M.2 Connector
|
|
||||||
- 2x USB 3.0 Port
|
|
||||||
- 2x 2500 Base-T (PCIe, r8125)
|
|
||||||
- HDMI 2.0
|
|
||||||
- MIPI DSI/CSI
|
|
||||||
- USB Type C 5V
|
|
||||||
|
|
||||||
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
|
|
||||||
Link: https://lore.kernel.org/r/20230318083745.6181-4-cnsztl@gmail.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/Makefile | 1 +
|
|
||||||
.../boot/dts/rockchip/rk3568-nanopi-r5c.dts | 112 ++++++++++++++++++
|
|
||||||
2 files changed, 113 insertions(+)
|
|
||||||
create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
|
||||||
@@ -74,5 +74,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-ro
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
|
||||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
|
|
||||||
@@ -0,0 +1,112 @@
|
|
||||||
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
||||||
+/*
|
|
||||||
+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
|
|
||||||
+ * (http://www.friendlyelec.com)
|
|
||||||
+ *
|
|
||||||
+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
|
|
||||||
+ */
|
|
||||||
+
|
|
||||||
+/dts-v1/;
|
|
||||||
+#include "rk3568-nanopi-r5s.dtsi"
|
|
||||||
+
|
|
||||||
+/ {
|
|
||||||
+ model = "FriendlyElec NanoPi R5C";
|
|
||||||
+ compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568";
|
|
||||||
+
|
|
||||||
+ gpio-keys {
|
|
||||||
+ compatible = "gpio-keys";
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&reset_button_pin>;
|
|
||||||
+
|
|
||||||
+ button-reset {
|
|
||||||
+ debounce-interval = <50>;
|
|
||||||
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
|
|
||||||
+ label = "reset";
|
|
||||||
+ linux,code = <KEY_RESTART>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ gpio-leds {
|
|
||||||
+ compatible = "gpio-leds";
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wlan_led_pin>;
|
|
||||||
+
|
|
||||||
+ led-lan {
|
|
||||||
+ color = <LED_COLOR_ID_GREEN>;
|
|
||||||
+ function = LED_FUNCTION_LAN;
|
|
||||||
+ gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ power_led: led-power {
|
|
||||||
+ color = <LED_COLOR_ID_RED>;
|
|
||||||
+ function = LED_FUNCTION_POWER;
|
|
||||||
+ linux,default-trigger = "heartbeat";
|
|
||||||
+ gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ led-wan {
|
|
||||||
+ color = <LED_COLOR_ID_GREEN>;
|
|
||||||
+ function = LED_FUNCTION_WAN;
|
|
||||||
+ gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ led-wlan {
|
|
||||||
+ color = <LED_COLOR_ID_GREEN>;
|
|
||||||
+ function = LED_FUNCTION_WLAN;
|
|
||||||
+ gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pcie2x1 {
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&pcie20_reset_pin>;
|
|
||||||
+ reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pcie3x1 {
|
|
||||||
+ num-lanes = <1>;
|
|
||||||
+ reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ vpcie3v3-supply = <&vcc3v3_pcie>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pcie3x2 {
|
|
||||||
+ num-lanes = <1>;
|
|
||||||
+ reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ vpcie3v3-supply = <&vcc3v3_pcie>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pinctrl {
|
|
||||||
+ gpio-leds {
|
|
||||||
+ lan_led_pin: lan-led-pin {
|
|
||||||
+ rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ power_led_pin: power-led-pin {
|
|
||||||
+ rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ wan_led_pin: wan-led-pin {
|
|
||||||
+ rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ wlan_led_pin: wlan-led-pin {
|
|
||||||
+ rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pcie {
|
|
||||||
+ pcie20_reset_pin: pcie20-reset-pin {
|
|
||||||
+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ rockchip-key {
|
|
||||||
+ reset_button_pin: reset-button-pin {
|
|
||||||
+ rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
|
|
@ -1,37 +0,0 @@
|
||||||
From 5325593377f07de31f7e473a9677a28a04c891f3 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Tianling Shen <cnsztl@gmail.com>
|
|
||||||
Date: Thu, 11 May 2023 00:18:50 +0800
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: fix button reset pin for nanopi r5c
|
|
||||||
|
|
||||||
The reset pin was wrongly assigned due to a copy/paste error,
|
|
||||||
fix it to match actual gpio pin.
|
|
||||||
|
|
||||||
While at it, remove a blank line from nanopi r5s dts.
|
|
||||||
|
|
||||||
Fixes: 05620031408a ("arm64: dts: rockchip: Add FriendlyARM NanoPi R5C")
|
|
||||||
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
|
|
||||||
Link: https://lore.kernel.org/r/20230510161850.4866-1-cnsztl@gmail.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts | 2 +-
|
|
||||||
arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 1 -
|
|
||||||
2 files changed, 1 insertion(+), 2 deletions(-)
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
|
|
||||||
@@ -106,7 +106,7 @@
|
|
||||||
|
|
||||||
rockchip-key {
|
|
||||||
reset_button_pin: reset-button-pin {
|
|
||||||
- rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
||||||
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
};
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
|
|
||||||
@@ -134,4 +134,3 @@
|
|
||||||
};
|
|
||||||
};
|
|
||||||
};
|
|
||||||
-
|
|
||||||
|
|
@ -1,33 +0,0 @@
|
||||||
From fc5a80a432607d05e85bba37971712405f75c546 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Tianling Shen <cnsztl@gmail.com>
|
|
||||||
Date: Sat, 16 Dec 2023 12:07:23 +0800
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: configure eth pad driver strength
|
|
||||||
for orangepi r1 plus lts
|
|
||||||
|
|
||||||
The default strength is not enough to provide stable connection
|
|
||||||
under 3.3v LDO voltage.
|
|
||||||
|
|
||||||
Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS")
|
|
||||||
Cc: stable@vger.kernel.org # 6.6+
|
|
||||||
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
|
|
||||||
Link: https://lore.kernel.org/r/20231216040723.17864-1-cnsztl@gmail.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts | 4 +++-
|
|
||||||
1 file changed, 3 insertions(+), 1 deletion(-)
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
|
|
||||||
@@ -26,9 +26,11 @@
|
|
||||||
compatible = "ethernet-phy-ieee802.3-c22";
|
|
||||||
reg = <0>;
|
|
||||||
|
|
||||||
+ motorcomm,auto-sleep-disabled;
|
|
||||||
motorcomm,clk-out-frequency-hz = <125000000>;
|
|
||||||
motorcomm,keep-pll-enabled;
|
|
||||||
- motorcomm,auto-sleep-disabled;
|
|
||||||
+ motorcomm,rx-clk-drv-microamp = <5020>;
|
|
||||||
+ motorcomm,rx-data-drv-microamp = <5020>;
|
|
||||||
|
|
||||||
pinctrl-0 = <ð_phy_reset_pin>;
|
|
||||||
pinctrl-names = "default";
|
|
||||||
|
|
@ -1,233 +0,0 @@
|
||||||
From 096ebfb74b19f2d4bdcbc33ae02e857ff4b3e0a0 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Jagan Teki <jagan@amarulasolutions.com>
|
|
||||||
Date: Thu, 12 Jan 2023 16:29:02 +0530
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: Add Radxa Compute Module 3 IO board
|
|
||||||
|
|
||||||
Radxa Compute Module 3(CM3) IO board is an application board from Radxa
|
|
||||||
and is compatible with Raspberry Pi CM4 IO form factor.
|
|
||||||
|
|
||||||
Specification:
|
|
||||||
- 1x HDMI,
|
|
||||||
- 2x MIPI DSI
|
|
||||||
- 2x MIPI CSI2
|
|
||||||
- 1x eDP
|
|
||||||
- 1x PCIe card
|
|
||||||
- 2x SATA
|
|
||||||
- 2x USB 2.0 Host
|
|
||||||
- 1x USB 3.0
|
|
||||||
- 1x USB 2.0 OTG
|
|
||||||
- Phone jack
|
|
||||||
- microSD slot
|
|
||||||
- 40-pin GPIO expansion header
|
|
||||||
- 12V DC
|
|
||||||
|
|
||||||
Radxa CM3 needs to mount on top of this IO board in order to create
|
|
||||||
complete Radxa CM3 IO board platform.
|
|
||||||
|
|
||||||
Add support for Radxa CM3 IO Board.
|
|
||||||
|
|
||||||
Co-developed-by: FUKAUMI Naoki <naoki@radxa.com>
|
|
||||||
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
|
|
||||||
Co-developed-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
|
|
||||||
Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
|
|
||||||
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
|
|
||||||
Link: https://lore.kernel.org/r/20230112105902.192852-3-jagan@amarulasolutions.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/Makefile | 1 +
|
|
||||||
.../boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 179 ++++++++++++++++++
|
|
||||||
2 files changed, 180 insertions(+)
|
|
||||||
create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
|
||||||
@@ -70,6 +70,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pi
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
|
|
||||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
|
|
||||||
@@ -0,0 +1,179 @@
|
|
||||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
||||||
+/*
|
|
||||||
+ * Copyright (c) 2022 Radxa Limited
|
|
||||||
+ * Copyright (c) 2022 Amarula Solutions(India)
|
|
||||||
+ */
|
|
||||||
+
|
|
||||||
+/dts-v1/;
|
|
||||||
+#include <dt-bindings/soc/rockchip,vop2.h>
|
|
||||||
+#include "rk3566.dtsi"
|
|
||||||
+#include "rk3566-radxa-cm3.dtsi"
|
|
||||||
+
|
|
||||||
+/ {
|
|
||||||
+ model = "Radxa Compute Module 3(CM3) IO Board";
|
|
||||||
+ compatible = "radxa,radxa-cm3-io", "radxa,radxa-cm3", "rockchip,rk3566";
|
|
||||||
+
|
|
||||||
+ aliases {
|
|
||||||
+ mmc1 = &sdmmc0;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ chosen: chosen {
|
|
||||||
+ stdout-path = "serial2:1500000n8";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ hdmi-con {
|
|
||||||
+ compatible = "hdmi-connector";
|
|
||||||
+ type = "a";
|
|
||||||
+
|
|
||||||
+ port {
|
|
||||||
+ hdmi_con_in: endpoint {
|
|
||||||
+ remote-endpoint = <&hdmi_out_con>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ leds {
|
|
||||||
+ compatible = "gpio-leds";
|
|
||||||
+
|
|
||||||
+ led-1 {
|
|
||||||
+ gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
|
|
||||||
+ color = <LED_COLOR_ID_GREEN>;
|
|
||||||
+ function = LED_FUNCTION_ACTIVITY;
|
|
||||||
+ linux,default-trigger = "heartbeat";
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&pi_nled_activity>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc5v0_usb30: vcc5v0-usb30-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vcc5v0_usb30";
|
|
||||||
+ enable-active-high;
|
|
||||||
+ gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&vcc5v0_usb30_en_h>;
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-min-microvolt = <5000000>;
|
|
||||||
+ regulator-max-microvolt = <5000000>;
|
|
||||||
+ vin-supply = <&vcc_sys>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcca1v8_image: vcca1v8-image-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vcca1v8_image";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+ vin-supply = <&vcc_1v8_p>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdda0v9_image: vdda0v9-image-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vcca0v9_image";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <900000>;
|
|
||||||
+ regulator-max-microvolt = <900000>;
|
|
||||||
+ vin-supply = <&vdda_0v9>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&combphy1 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&hdmi {
|
|
||||||
+ avdd-0v9-supply = <&vdda0v9_image>;
|
|
||||||
+ avdd-1v8-supply = <&vcca1v8_image>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&hdmi_in {
|
|
||||||
+ hdmi_in_vp0: endpoint {
|
|
||||||
+ remote-endpoint = <&vp0_out_hdmi>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&hdmi_out {
|
|
||||||
+ hdmi_out_con: endpoint {
|
|
||||||
+ remote-endpoint = <&hdmi_con_in>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&hdmi_sound {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pinctrl {
|
|
||||||
+ leds {
|
|
||||||
+ pi_nled_activity: pi-nled-activity {
|
|
||||||
+ rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ sdcard {
|
|
||||||
+ sdmmc_pwren: sdmmc-pwren {
|
|
||||||
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ usb {
|
|
||||||
+ vcc5v0_usb30_en_h: vcc5v0-host-en-h {
|
|
||||||
+ rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&sdmmc0 {
|
|
||||||
+ bus-width = <4>;
|
|
||||||
+ cap-mmc-highspeed;
|
|
||||||
+ cap-sd-highspeed;
|
|
||||||
+ disable-wp;
|
|
||||||
+ vqmmc-supply = <&vccio_sd>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&uart2 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb2phy0_host {
|
|
||||||
+ phy-supply = <&vcc5v0_usb30>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb2phy1_host {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb2phy1_otg {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb_host0_ehci {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb_host1_xhci {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&vop {
|
|
||||||
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
|
||||||
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&vop_mmu {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&vp0 {
|
|
||||||
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
|
||||||
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
|
||||||
+ remote-endpoint = <&hdmi_in_vp0>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
|
|
@ -1,63 +0,0 @@
|
||||||
From d211665c5a833873ee37e501af58adbf028e6b5f Mon Sep 17 00:00:00 2001
|
|
||||||
From: Tianling Shen <cnsztl@gmail.com>
|
|
||||||
Date: Sat, 13 May 2023 21:53:07 +0800
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: Add FriendlyARM NanoPi R2C Plus
|
|
||||||
|
|
||||||
The NanoPi R2C Plus is a small variant of NanoPi R2C with a on-board
|
|
||||||
eMMC flash (8G) included.
|
|
||||||
|
|
||||||
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
|
|
||||||
Link: https://lore.kernel.org/r/20230513135307.26554-2-cnsztl@gmail.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/Makefile | 1 +
|
|
||||||
.../boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts | 33 ++++++++++++++++++++++
|
|
||||||
2 files changed, 34 insertions(+)
|
|
||||||
create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
|
||||||
@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-od
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
|
|
||||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c-plus.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts
|
|
||||||
@@ -0,0 +1,33 @@
|
|
||||||
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
||||||
+/*
|
|
||||||
+ * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd.
|
|
||||||
+ * (http://www.friendlyarm.com)
|
|
||||||
+ *
|
|
||||||
+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
|
|
||||||
+ */
|
|
||||||
+
|
|
||||||
+/dts-v1/;
|
|
||||||
+#include "rk3328-nanopi-r2c.dts"
|
|
||||||
+
|
|
||||||
+/ {
|
|
||||||
+ model = "FriendlyElec NanoPi R2C Plus";
|
|
||||||
+ compatible = "friendlyarm,nanopi-r2c-plus", "rockchip,rk3328";
|
|
||||||
+
|
|
||||||
+ aliases {
|
|
||||||
+ mmc1 = &emmc;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&emmc {
|
|
||||||
+ bus-width = <8>;
|
|
||||||
+ cap-mmc-highspeed;
|
|
||||||
+ max-frequency = <150000000>;
|
|
||||||
+ mmc-ddr-1_8v;
|
|
||||||
+ mmc-hs200-1_8v;
|
|
||||||
+ non-removable;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
|
||||||
+ vmmc-supply = <&vcc_io_33>;
|
|
||||||
+ vqmmc-supply = <&vcc18_emmc>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
|
|
@ -1,131 +0,0 @@
|
||||||
From cc52bfc04726a574fc4440bbbe0c710890e7040a Mon Sep 17 00:00:00 2001
|
|
||||||
From: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
|
|
||||||
Date: Wed, 25 Jan 2023 21:40:22 +0530
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: Enable Ethernet for Radxa CM3 IO
|
|
||||||
|
|
||||||
Add ethernet nodes for enabling gmac1 on the Radxa CM3 IO board.
|
|
||||||
|
|
||||||
Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
|
|
||||||
Link: https://lore.kernel.org/r/20230125161023.12115-1-jagan@amarulasolutions.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
.../boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 93 +++++++++++++++++++
|
|
||||||
1 file changed, 93 insertions(+)
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
|
|
||||||
@@ -21,6 +21,13 @@
|
|
||||||
stdout-path = "serial2:1500000n8";
|
|
||||||
};
|
|
||||||
|
|
||||||
+ gmac1_clkin: external-gmac1-clock {
|
|
||||||
+ compatible = "fixed-clock";
|
|
||||||
+ clock-frequency = <125000000>;
|
|
||||||
+ clock-output-names = "gmac1_clkin";
|
|
||||||
+ #clock-cells = <0>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
hdmi-con {
|
|
||||||
compatible = "hdmi-connector";
|
|
||||||
type = "a";
|
|
||||||
@@ -83,6 +90,29 @@
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
+&gmac1 {
|
|
||||||
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
|
||||||
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
|
|
||||||
+ assigned-clock-rates = <0>, <125000000>;
|
|
||||||
+ clock_in_out = "input";
|
|
||||||
+ phy-handle = <&rgmii_phy1>;
|
|
||||||
+ phy-mode = "rgmii";
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&gmac1m0_miim
|
|
||||||
+ &gmac1m0_tx_bus2
|
|
||||||
+ &gmac1m0_rx_bus2
|
|
||||||
+ &gmac1m0_rgmii_clk
|
|
||||||
+ &gmac1m0_rgmii_bus
|
|
||||||
+ &gmac1m0_clkinout>;
|
|
||||||
+ snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
|
|
||||||
+ snps,reset-active-low;
|
|
||||||
+ /* Reset time is 20ms, 100ms for rtl8211f */
|
|
||||||
+ snps,reset-delays-us = <0 20000 100000>;
|
|
||||||
+ tx_delay = <0x46>;
|
|
||||||
+ rx_delay = <0x2e>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
&hdmi {
|
|
||||||
avdd-0v9-supply = <&vdda0v9_image>;
|
|
||||||
avdd-1v8-supply = <&vcca1v8_image>;
|
|
||||||
@@ -105,7 +135,70 @@
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
+&mdio1 {
|
|
||||||
+ rgmii_phy1: ethernet-phy@0 {
|
|
||||||
+ compatible="ethernet-phy-ieee802.3-c22";
|
|
||||||
+ reg= <0x0>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
&pinctrl {
|
|
||||||
+ gmac1 {
|
|
||||||
+ gmac1m0_miim: gmac1m0-miim {
|
|
||||||
+ rockchip,pins =
|
|
||||||
+ /* gmac1_mdcm0 */
|
|
||||||
+ <3 RK_PC4 3 &pcfg_pull_none_drv_level_15>,
|
|
||||||
+ /* gmac1_mdiom0 */
|
|
||||||
+ <3 RK_PC5 3 &pcfg_pull_none_drv_level_15>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ gmac1m0_rx_bus2: gmac1m0-rx-bus2 {
|
|
||||||
+ rockchip,pins =
|
|
||||||
+ /* gmac1_rxd0m0 */
|
|
||||||
+ <3 RK_PB1 3 &pcfg_pull_none_drv_level_15>,
|
|
||||||
+ /* gmac1_rxd1m0 */
|
|
||||||
+ <3 RK_PB2 3 &pcfg_pull_none_drv_level_15>,
|
|
||||||
+ /* gmac1_rxdvcrsm0 */
|
|
||||||
+ <3 RK_PB3 3 &pcfg_pull_none_drv_level_15>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ gmac1m0_tx_bus2: gmac1m0-tx-bus2 {
|
|
||||||
+ rockchip,pins =
|
|
||||||
+ /* gmac1_txd0m0 */
|
|
||||||
+ <3 RK_PB5 3 &pcfg_pull_none_drv_level_15>,
|
|
||||||
+ /* gmac1_txd1m0 */
|
|
||||||
+ <3 RK_PB6 3 &pcfg_pull_none_drv_level_15>,
|
|
||||||
+ /* gmac1_txenm0 */
|
|
||||||
+ <3 RK_PB7 3 &pcfg_pull_none_drv_level_15>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ gmac1m0_rgmii_clk: gmac1m0-rgmii-clk {
|
|
||||||
+ rockchip,pins =
|
|
||||||
+ /* gmac1_rxclkm0 */
|
|
||||||
+ <3 RK_PA7 3 &pcfg_pull_none_drv_level_15>,
|
|
||||||
+ /* gmac1_txclkm0 */
|
|
||||||
+ <3 RK_PA6 3 &pcfg_pull_none_drv_level_15>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ gmac1m0_rgmii_bus: gmac1m0-rgmii-bus {
|
|
||||||
+ rockchip,pins =
|
|
||||||
+ /* gmac1_rxd2m0 */
|
|
||||||
+ <3 RK_PA4 3 &pcfg_pull_none_drv_level_15>,
|
|
||||||
+ /* gmac1_rxd3m0 */
|
|
||||||
+ <3 RK_PA5 3 &pcfg_pull_none_drv_level_15>,
|
|
||||||
+ /* gmac1_txd2m0 */
|
|
||||||
+ <3 RK_PA2 3 &pcfg_pull_none_drv_level_15>,
|
|
||||||
+ /* gmac1_txd3m0 */
|
|
||||||
+ <3 RK_PA3 3 &pcfg_pull_none_drv_level_15>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ gmac1m0_clkinout: gmac1m0-clkinout {
|
|
||||||
+ rockchip,pins =
|
|
||||||
+ /* gmac1_mclkinoutm0 */
|
|
||||||
+ <3 RK_PC0 3 &pcfg_pull_none_drv_level_15>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
leds {
|
|
||||||
pi_nled_activity: pi-nled-activity {
|
|
||||||
rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
|
|
@ -1,386 +0,0 @@
|
||||||
From 7469ab529bcad50490f6ff651c3e4f03bfa88fe0 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Jagan Teki <jagan@amarulasolutions.com>
|
|
||||||
Date: Thu, 12 Jan 2023 16:29:01 +0530
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3
|
|
||||||
MIME-Version: 1.0
|
|
||||||
Content-Type: text/plain; charset=UTF-8
|
|
||||||
Content-Transfer-Encoding: 8bit
|
|
||||||
|
|
||||||
Radxa Compute Module 3(CM3) is one of the modules from a series
|
|
||||||
System On Module based on the Radxa ROCK 3 series and is compatible
|
|
||||||
with Raspberry Pi CM4 pinout and form factor.
|
|
||||||
|
|
||||||
Specification:
|
|
||||||
- Rockchip RK3566
|
|
||||||
- up to 8GB LPDDR4
|
|
||||||
- up to 128GB high performance eMMC
|
|
||||||
- Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless,
|
|
||||||
BT 5.0, BLE with onboard and external antenna.
|
|
||||||
- Gigabit Ethernet PHY
|
|
||||||
|
|
||||||
Radxa CM3 needs to mount on top of this IO board in order to create
|
|
||||||
complete Radxa CM3 IO board platform.
|
|
||||||
|
|
||||||
Since Radxa CM3 is compatible with Raspberry Pi CM4 pinout so it is
|
|
||||||
possible to mount Radxa CM3 on top of the Rasberry Pi CM4 IO board.
|
|
||||||
|
|
||||||
Add support for Radxa CM3.
|
|
||||||
|
|
||||||
Co-developed-by: FUKAUMI Naoki <naoki@radxa.com>
|
|
||||||
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
|
|
||||||
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
|
|
||||||
Link: https://lore.kernel.org/r/20230112105902.192852-2-jagan@amarulasolutions.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
.../boot/dts/rockchip/rk3566-radxa-cm3.dtsi | 345 ++++++++++++++++++
|
|
||||||
1 file changed, 345 insertions(+)
|
|
||||||
create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
|
|
||||||
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
|
|
||||||
@@ -0,0 +1,345 @@
|
|
||||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
||||||
+/*
|
|
||||||
+ * Copyright (c) 2022 Radxa Limited
|
|
||||||
+ * Copyright (c) 2022 Amarula Solutions(India)
|
|
||||||
+ */
|
|
||||||
+
|
|
||||||
+#include <dt-bindings/gpio/gpio.h>
|
|
||||||
+#include <dt-bindings/leds/common.h>
|
|
||||||
+
|
|
||||||
+/ {
|
|
||||||
+ compatible = "radxa,radxa-cm3", "rockchip,rk3566";
|
|
||||||
+
|
|
||||||
+ aliases {
|
|
||||||
+ mmc0 = &sdhci;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ leds {
|
|
||||||
+ compatible = "gpio-leds";
|
|
||||||
+
|
|
||||||
+ led-0 {
|
|
||||||
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ color = <LED_COLOR_ID_GREEN>;
|
|
||||||
+ function = LED_FUNCTION_STATUS;
|
|
||||||
+ linux,default-trigger = "timer";
|
|
||||||
+ default-state = "on";
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&user_led2>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_sys: vcc-sys-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vcc_sys";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <5000000>;
|
|
||||||
+ regulator-max-microvolt = <5000000>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_1v8: vcc-1v8-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vcc_1v8";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+ vin-supply = <&vcc_1v8_p>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_3v3: vcc-3v3-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vcc_3v3";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+ vin-supply = <&vcc3v3_sys>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcca_1v8: vcca-1v8-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vcca_1v8";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+ vin-supply = <&vcc_1v8_p>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu0 {
|
|
||||||
+ cpu-supply = <&vdd_cpu>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu1 {
|
|
||||||
+ cpu-supply = <&vdd_cpu>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu2 {
|
|
||||||
+ cpu-supply = <&vdd_cpu>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu3 {
|
|
||||||
+ cpu-supply = <&vdd_cpu>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&gpu {
|
|
||||||
+ mali-supply = <&vdd_gpu_npu>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&i2c0 {
|
|
||||||
+ status = "okay";
|
|
||||||
+
|
|
||||||
+ vdd_cpu: regulator@1c {
|
|
||||||
+ compatible = "tcs,tcs4525";
|
|
||||||
+ reg = <0x1c>;
|
|
||||||
+ fcs,suspend-voltage-selector = <1>;
|
|
||||||
+ regulator-name = "vdd_cpu";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <712500>;
|
|
||||||
+ regulator-max-microvolt = <1390000>;
|
|
||||||
+ regulator-ramp-delay = <2300>;
|
|
||||||
+ vin-supply = <&vcc_sys>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ rk817: pmic@20 {
|
|
||||||
+ compatible = "rockchip,rk817";
|
|
||||||
+ reg = <0x20>;
|
|
||||||
+ #clock-cells = <1>;
|
|
||||||
+ clock-output-names = "rk817-clkout1", "rk817-clkout2";
|
|
||||||
+ interrupt-parent = <&gpio0>;
|
|
||||||
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&pmic_int_l>;
|
|
||||||
+ rockchip,system-power-controller;
|
|
||||||
+ wakeup-source;
|
|
||||||
+
|
|
||||||
+ vcc1-supply = <&vcc_sys>;
|
|
||||||
+ vcc2-supply = <&vcc_sys>;
|
|
||||||
+ vcc3-supply = <&vcc_sys>;
|
|
||||||
+ vcc4-supply = <&vcc_sys>;
|
|
||||||
+ vcc5-supply = <&vcc_sys>;
|
|
||||||
+ vcc6-supply = <&vcc_sys>;
|
|
||||||
+ vcc7-supply = <&vcc_sys>;
|
|
||||||
+
|
|
||||||
+ regulators {
|
|
||||||
+ vdd_logic: DCDC_REG1 {
|
|
||||||
+ regulator-name = "vdd_logic";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-initial-mode = <0x2>;
|
|
||||||
+ regulator-min-microvolt = <500000>;
|
|
||||||
+ regulator-max-microvolt = <1350000>;
|
|
||||||
+ regulator-ramp-delay = <6001>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <900000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdd_gpu_npu: DCDC_REG2 {
|
|
||||||
+ regulator-name = "vdd_gpu_npu";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-initial-mode = <0x2>;
|
|
||||||
+ regulator-min-microvolt = <500000>;
|
|
||||||
+ regulator-max-microvolt = <1350000>;
|
|
||||||
+ regulator-ramp-delay = <6001>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_ddr: DCDC_REG3 {
|
|
||||||
+ regulator-name = "vcc_ddr";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-initial-mode = <0x2>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc3v3_sys: DCDC_REG4 {
|
|
||||||
+ regulator-name = "vcc3v3_sys";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-initial-mode = <0x2>;
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <3300000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcca1v8_pmu: LDO_REG1 {
|
|
||||||
+ regulator-name = "vcca1v8_pmu";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <1800000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdda_0v9: LDO_REG2 {
|
|
||||||
+ regulator-name = "vdda_0v9";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <900000>;
|
|
||||||
+ regulator-max-microvolt = <900000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdda0v9_pmu: LDO_REG3 {
|
|
||||||
+ regulator-name = "vdda0v9_pmu";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <900000>;
|
|
||||||
+ regulator-max-microvolt = <900000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <900000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vccio_acodec: LDO_REG4 {
|
|
||||||
+ regulator-name = "vccio_acodec";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vccio_sd: LDO_REG5 {
|
|
||||||
+ regulator-name = "vccio_sd";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc3v3_pmu: LDO_REG6 {
|
|
||||||
+ regulator-name = "vcc3v3_pmu";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <3300000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_1v8_p: LDO_REG7 {
|
|
||||||
+ regulator-name = "vcc_1v8_p";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc1v8_dvp: LDO_REG8 {
|
|
||||||
+ regulator-name = "vcc1v8_dvp";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc2v8_dvp: LDO_REG9 {
|
|
||||||
+ regulator-name = "vcc2v8_dvp";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <2800000>;
|
|
||||||
+ regulator-max-microvolt = <2800000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pinctrl {
|
|
||||||
+ pmic {
|
|
||||||
+ pmic_int_l: pmic-int-l {
|
|
||||||
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ leds {
|
|
||||||
+ user_led2: user-led2 {
|
|
||||||
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pmu_io_domains {
|
|
||||||
+ pmuio1-supply = <&vcc3v3_pmu>;
|
|
||||||
+ pmuio2-supply = <&vcc_3v3>;
|
|
||||||
+ vccio1-supply = <&vccio_acodec>;
|
|
||||||
+ vccio2-supply = <&vcc_1v8>;
|
|
||||||
+ vccio3-supply = <&vccio_sd>;
|
|
||||||
+ vccio4-supply = <&vcc_1v8>;
|
|
||||||
+ vccio5-supply = <&vcc_3v3>;
|
|
||||||
+ vccio6-supply = <&vcc_3v3>;
|
|
||||||
+ vccio7-supply = <&vcc_3v3>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&saradc {
|
|
||||||
+ vref-supply = <&vcca_1v8>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&sdhci {
|
|
||||||
+ bus-width = <8>;
|
|
||||||
+ max-frequency = <200000000>;
|
|
||||||
+ mmc-hs200-1_8v;
|
|
||||||
+ non-removable;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
|
||||||
+ vmmc-supply = <&vcc_3v3>;
|
|
||||||
+ vqmmc-supply = <&vcc_1v8>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb2phy0 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb2phy1 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&tsadc {
|
|
||||||
+ rockchip,hw-tshut-mode = <1>;
|
|
||||||
+ rockchip,hw-tshut-polarity = <0>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
|
|
@ -1,134 +0,0 @@
|
||||||
From af5a803bf212e077e5fb7a1d4cf6be02f74a74ca Mon Sep 17 00:00:00 2001
|
|
||||||
From: Jagan Teki <jagan@amarulasolutions.com>
|
|
||||||
Date: Wed, 25 Jan 2023 21:40:23 +0530
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: rk3566: Enable WiFi, BT support for
|
|
||||||
Radxa CM3
|
|
||||||
|
|
||||||
Radxa Compute Module 3 has an onboard AW_CM256SM WiFi/BT module.
|
|
||||||
|
|
||||||
Add nodes for enabling it.
|
|
||||||
|
|
||||||
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
|
|
||||||
Link: https://lore.kernel.org/r/20230125161023.12115-2-jagan@amarulasolutions.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
.../boot/dts/rockchip/rk3566-radxa-cm3.dtsi | 80 +++++++++++++++++++
|
|
||||||
1 file changed, 80 insertions(+)
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
|
|
||||||
@@ -66,6 +66,15 @@
|
|
||||||
regulator-max-microvolt = <1800000>;
|
|
||||||
vin-supply = <&vcc_1v8_p>;
|
|
||||||
};
|
|
||||||
+
|
|
||||||
+ sdio_pwrseq: pwrseq-sdio {
|
|
||||||
+ compatible = "mmc-pwrseq-simple";
|
|
||||||
+ clocks = <&rk817 1>;
|
|
||||||
+ clock-names = "ext_clock";
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&wifi_reg_on_h>;
|
|
||||||
+ reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
|
|
||||||
+ };
|
|
||||||
};
|
|
||||||
|
|
||||||
&cpu0 {
|
|
||||||
@@ -287,6 +296,20 @@
|
|
||||||
};
|
|
||||||
|
|
||||||
&pinctrl {
|
|
||||||
+ bluetooth {
|
|
||||||
+ bt_host_wake_h: bt-host-wake-h {
|
|
||||||
+ rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ bt_reg_on_h: bt-reg-on-h {
|
|
||||||
+ rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ bt_wake_host_h: bt-wake-host-h {
|
|
||||||
+ rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
pmic {
|
|
||||||
pmic_int_l: pmic-int-l {
|
|
||||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
||||||
@@ -298,6 +321,16 @@
|
|
||||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
+
|
|
||||||
+ wifi {
|
|
||||||
+ wifi_reg_on_h: wifi-reg-on-h {
|
|
||||||
+ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ wifi_host_wake_h: wifi-host-wake-h {
|
|
||||||
+ rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
};
|
|
||||||
|
|
||||||
&pmu_io_domains {
|
|
||||||
@@ -318,6 +351,34 @@
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
+&sdmmc1 {
|
|
||||||
+ #address-cells = <1>;
|
|
||||||
+ #size-cells = <0>;
|
|
||||||
+ bus-width = <4>;
|
|
||||||
+ disable-wp;
|
|
||||||
+ cap-sd-highspeed;
|
|
||||||
+ cap-sdio-irq;
|
|
||||||
+ keep-power-in-suspend;
|
|
||||||
+ mmc-pwrseq = <&sdio_pwrseq>;
|
|
||||||
+ non-removable;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
|
|
||||||
+ sd-uhs-sdr104;
|
|
||||||
+ vmmc-supply = <&vcc_3v3>;
|
|
||||||
+ vqmmc-supply = <&vcc_1v8>;
|
|
||||||
+ status = "okay";
|
|
||||||
+
|
|
||||||
+ wifi@1 {
|
|
||||||
+ compatible = "brcm,bcm43455-fmac";
|
|
||||||
+ reg = <1>;
|
|
||||||
+ interrupt-parent = <&gpio2>;
|
|
||||||
+ interrupts = <RK_PC1 IRQ_TYPE_LEVEL_HIGH>;
|
|
||||||
+ interrupt-names = "host-wake";
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&wifi_host_wake_h>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
&sdhci {
|
|
||||||
bus-width = <8>;
|
|
||||||
max-frequency = <200000000>;
|
|
||||||
@@ -330,6 +391,25 @@
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
+&uart1 {
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>;
|
|
||||||
+ status = "okay";
|
|
||||||
+
|
|
||||||
+ bluetooth {
|
|
||||||
+ compatible = "brcm,bcm4345c5";
|
|
||||||
+ clocks = <&rk817 1>;
|
|
||||||
+ clock-names = "lpo";
|
|
||||||
+ device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>;
|
|
||||||
+ vbat-supply = <&vcc_3v3>;
|
|
||||||
+ vddio-supply = <&vcc_1v8>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
&usb2phy0 {
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
@ -1,32 +0,0 @@
|
||||||
From 477ed3ade6a46e445b4e2348b710c51df4f6f4b1 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
|
|
||||||
Date: Thu, 23 Feb 2023 19:29:29 +0530
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: Enable USB OTG for rk3566 Radxa CM3
|
|
||||||
|
|
||||||
Enable USB OTG support for Radxa Compute Module 3 IO Board
|
|
||||||
|
|
||||||
Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
|
|
||||||
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
|
|
||||||
Link: https://lore.kernel.org/r/20230223135929.630787-1-abbaraju.manojsai@amarulasolutions.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 8 ++++++++
|
|
||||||
1 file changed, 8 insertions(+)
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
|
|
||||||
@@ -254,6 +254,14 @@
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
+&usb2phy0_otg {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb_host0_xhci {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
&vop {
|
|
||||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
|
||||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
|
||||||
|
|
@ -1,45 +0,0 @@
|
||||||
From 8f19828844f20b22182719cf53be64f8c955aee8 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Jagan Teki <jagan@amarulasolutions.com>
|
|
||||||
Date: Mon, 23 Jan 2023 12:46:50 +0530
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: Fix compatible for Radxa CM3
|
|
||||||
|
|
||||||
The compatible string "radxa,radxa-cm3" referring the product name
|
|
||||||
as "Radxa Radxa CM3" but the actual product name is "Radxa CM3".
|
|
||||||
|
|
||||||
Fix the compatible strings.
|
|
||||||
|
|
||||||
Fixes: 24a28d3eb07d ("dt-bindings: arm: rockchip: Add Radxa Compute Module 3")
|
|
||||||
Fixes: 7469ab529bca ("arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3")
|
|
||||||
Fixes: 096ebfb74b19 ("arm64: dts: rockchip: Add Radxa Compute Module 3 IO board")
|
|
||||||
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
||||||
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
|
|
||||||
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
||||||
Link: https://lore.kernel.org/r/20230123071654.73139-1-jagan@amarulasolutions.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 2 +-
|
|
||||||
arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi | 2 +-
|
|
||||||
2 files changed, 2 insertions(+), 2 deletions(-)
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
|
|
||||||
@@ -11,7 +11,7 @@
|
|
||||||
|
|
||||||
/ {
|
|
||||||
model = "Radxa Compute Module 3(CM3) IO Board";
|
|
||||||
- compatible = "radxa,radxa-cm3-io", "radxa,radxa-cm3", "rockchip,rk3566";
|
|
||||||
+ compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
|
|
||||||
|
|
||||||
aliases {
|
|
||||||
mmc1 = &sdmmc0;
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
|
|
||||||
@@ -8,7 +8,7 @@
|
|
||||||
#include <dt-bindings/leds/common.h>
|
|
||||||
|
|
||||||
/ {
|
|
||||||
- compatible = "radxa,radxa-cm3", "rockchip,rk3566";
|
|
||||||
+ compatible = "radxa,cm3", "rockchip,rk3566";
|
|
||||||
|
|
||||||
aliases {
|
|
||||||
mmc0 = &sdhci;
|
|
||||||
|
|
@ -1,28 +0,0 @@
|
||||||
From f99a75f11f46a24dabb33e90893eebf61dca0566 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
||||||
Date: Sun, 2 Jul 2023 20:52:42 +0200
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: minor whitespace cleanup around '='
|
|
||||||
|
|
||||||
The DTS code coding style expects exactly one space before and after '='
|
|
||||||
sign.
|
|
||||||
|
|
||||||
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
||||||
Link: https://lore.kernel.org/r/20230702185242.44421-1-krzysztof.kozlowski@linaro.org
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
.../boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 4 ++--
|
|
||||||
1 files changed, 2 insertions(+), 2 deletions(-)
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
|
|
||||||
@@ -137,8 +137,8 @@
|
|
||||||
|
|
||||||
&mdio1 {
|
|
||||||
rgmii_phy1: ethernet-phy@0 {
|
|
||||||
- compatible="ethernet-phy-ieee802.3-c22";
|
|
||||||
- reg= <0x0>;
|
|
||||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
|
||||||
+ reg = <0x0>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
|
|
@ -1,689 +0,0 @@
|
||||||
From 2bf2f4d9f673013a58109626b87329310537a611 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Chukun Pan <amadeus@jmu.edu.cn>
|
|
||||||
Date: Fri, 9 Dec 2022 18:25:24 +0800
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: Add Radxa CM3I E25
|
|
||||||
|
|
||||||
Radxa E25 is a network application carrier board for the Radxa CM3
|
|
||||||
Industrial (CM3I) SoM, which is based on the Rockchip RK3568 SoC.
|
|
||||||
|
|
||||||
It has the following features:
|
|
||||||
|
|
||||||
- MicroSD card socket, on board eMMC flash
|
|
||||||
- 2x 2.5GbE Realtek RTL8125B Ethernet transceiver
|
|
||||||
- 1x USB Type-C port (Power and Serial console)
|
|
||||||
- 1x USB 3.0 OTG port
|
|
||||||
- mini PCIe socket (USB or PCIe)
|
|
||||||
- ngff PCIe socket (USB or SATA)
|
|
||||||
- 1x User LED and 16x RGB LEDs
|
|
||||||
- 26-pin expansion header
|
|
||||||
|
|
||||||
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
|
|
||||||
Link: https://lore.kernel.org/r/20221209102524.129367-3-amadeus@jmu.edu.cn
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/Makefile | 1 +
|
|
||||||
.../boot/dts/rockchip/rk3568-radxa-cm3i.dtsi | 416 ++++++++++++++++++
|
|
||||||
.../boot/dts/rockchip/rk3568-radxa-e25.dts | 229 ++++++++++
|
|
||||||
3 files changed, 646 insertions(+)
|
|
||||||
create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
|
|
||||||
create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
|
||||||
@@ -78,4 +78,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bp
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
|
|
||||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
|
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
|
|
||||||
@@ -0,0 +1,416 @@
|
|
||||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
||||||
+
|
|
||||||
+#include <dt-bindings/gpio/gpio.h>
|
|
||||||
+#include <dt-bindings/leds/common.h>
|
|
||||||
+#include <dt-bindings/pinctrl/rockchip.h>
|
|
||||||
+#include "rk3568.dtsi"
|
|
||||||
+
|
|
||||||
+/ {
|
|
||||||
+ model = "Radxa CM3 Industrial Board";
|
|
||||||
+ compatible = "radxa,cm3i", "rockchip,rk3568";
|
|
||||||
+
|
|
||||||
+ aliases {
|
|
||||||
+ mmc0 = &sdhci;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ chosen {
|
|
||||||
+ stdout-path = "serial2:115200n8";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ gpio-leds {
|
|
||||||
+ compatible = "gpio-leds";
|
|
||||||
+
|
|
||||||
+ led_user: led-0 {
|
|
||||||
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ function = LED_FUNCTION_HEARTBEAT;
|
|
||||||
+ color = <LED_COLOR_ID_GREEN>;
|
|
||||||
+ linux,default-trigger = "heartbeat";
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&led_user_en>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pcie30_avdd0v9: pcie30-avdd0v9-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "pcie30_avdd0v9";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <900000>;
|
|
||||||
+ regulator-max-microvolt = <900000>;
|
|
||||||
+ vin-supply = <&vcc3v3_sys>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pcie30_avdd1v8: pcie30-avdd1v8-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "pcie30_avdd1v8";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+ vin-supply = <&vcc3v3_sys>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc3v3_sys: vcc3v3-sys-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vcc3v3_sys";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+ vin-supply = <&vcc5v_input>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc5v0_sys: vcc5v0-sys-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vcc5v0_sys";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <5000000>;
|
|
||||||
+ regulator-max-microvolt = <5000000>;
|
|
||||||
+ vin-supply = <&vcc5v_input>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ /* labeled +5v_input in schematic */
|
|
||||||
+ vcc5v_input: vcc5v-input-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vcc5v_input";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <5000000>;
|
|
||||||
+ regulator-max-microvolt = <5000000>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&combphy0 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&combphy1 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&combphy2 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu0 {
|
|
||||||
+ cpu-supply = <&vdd_cpu>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu1 {
|
|
||||||
+ cpu-supply = <&vdd_cpu>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu2 {
|
|
||||||
+ cpu-supply = <&vdd_cpu>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu3 {
|
|
||||||
+ cpu-supply = <&vdd_cpu>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&display_subsystem {
|
|
||||||
+ status = "disabled";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&gpu {
|
|
||||||
+ mali-supply = <&vdd_gpu>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&i2c0 {
|
|
||||||
+ status = "okay";
|
|
||||||
+
|
|
||||||
+ vdd_cpu: regulator@1c {
|
|
||||||
+ compatible = "tcs,tcs4525";
|
|
||||||
+ reg = <0x1c>;
|
|
||||||
+ fcs,suspend-voltage-selector = <1>;
|
|
||||||
+ regulator-name = "vdd_cpu";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <800000>;
|
|
||||||
+ regulator-max-microvolt = <1150000>;
|
|
||||||
+ regulator-ramp-delay = <2300>;
|
|
||||||
+ vin-supply = <&vcc5v_input>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ rk809: pmic@20 {
|
|
||||||
+ compatible = "rockchip,rk809";
|
|
||||||
+ reg = <0x20>;
|
|
||||||
+ interrupt-parent = <&gpio0>;
|
|
||||||
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
|
||||||
+ #clock-cells = <1>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&pmic_int>;
|
|
||||||
+ rockchip,system-power-controller;
|
|
||||||
+ wakeup-source;
|
|
||||||
+
|
|
||||||
+ vcc1-supply = <&vcc3v3_sys>;
|
|
||||||
+ vcc2-supply = <&vcc3v3_sys>;
|
|
||||||
+ vcc3-supply = <&vcc3v3_sys>;
|
|
||||||
+ vcc4-supply = <&vcc3v3_sys>;
|
|
||||||
+ vcc5-supply = <&vcc3v3_sys>;
|
|
||||||
+ vcc6-supply = <&vcc3v3_sys>;
|
|
||||||
+ vcc7-supply = <&vcc3v3_sys>;
|
|
||||||
+ vcc8-supply = <&vcc3v3_sys>;
|
|
||||||
+ vcc9-supply = <&vcc3v3_sys>;
|
|
||||||
+
|
|
||||||
+ regulators {
|
|
||||||
+ vdd_logic: DCDC_REG1 {
|
|
||||||
+ regulator-name = "vdd_logic";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-init-microvolt = <900000>;
|
|
||||||
+ regulator-initial-mode = <0x2>;
|
|
||||||
+ regulator-min-microvolt = <500000>;
|
|
||||||
+ regulator-max-microvolt = <1350000>;
|
|
||||||
+ regulator-ramp-delay = <6001>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdd_gpu: DCDC_REG2 {
|
|
||||||
+ regulator-name = "vdd_gpu";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-init-microvolt = <900000>;
|
|
||||||
+ regulator-initial-mode = <0x2>;
|
|
||||||
+ regulator-min-microvolt = <500000>;
|
|
||||||
+ regulator-max-microvolt = <1350000>;
|
|
||||||
+ regulator-ramp-delay = <6001>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_ddr: DCDC_REG3 {
|
|
||||||
+ regulator-name = "vcc_ddr";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-initial-mode = <0x2>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdd_npu: DCDC_REG4 {
|
|
||||||
+ regulator-name = "vdd_npu";
|
|
||||||
+ regulator-init-microvolt = <900000>;
|
|
||||||
+ regulator-initial-mode = <0x2>;
|
|
||||||
+ regulator-min-microvolt = <500000>;
|
|
||||||
+ regulator-max-microvolt = <1350000>;
|
|
||||||
+ regulator-ramp-delay = <6001>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_1v8: DCDC_REG5 {
|
|
||||||
+ regulator-name = "vcc_1v8";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdda0v9_image: LDO_REG1 {
|
|
||||||
+ regulator-name = "vdda0v9_image";
|
|
||||||
+ regulator-min-microvolt = <900000>;
|
|
||||||
+ regulator-max-microvolt = <900000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdda_0v9: LDO_REG2 {
|
|
||||||
+ regulator-name = "vdda_0v9";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <900000>;
|
|
||||||
+ regulator-max-microvolt = <900000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdda0v9_pmu: LDO_REG3 {
|
|
||||||
+ regulator-name = "vdda0v9_pmu";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <900000>;
|
|
||||||
+ regulator-max-microvolt = <900000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <900000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vccio_acodec: LDO_REG4 {
|
|
||||||
+ regulator-name = "vccio_acodec";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vccio_sd: LDO_REG5 {
|
|
||||||
+ regulator-name = "vccio_sd";
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc3v3_pmu: LDO_REG6 {
|
|
||||||
+ regulator-name = "vcc3v3_pmu";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <3300000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcca_1v8: LDO_REG7 {
|
|
||||||
+ regulator-name = "vcca_1v8";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcca1v8_pmu: LDO_REG8 {
|
|
||||||
+ regulator-name = "vcca1v8_pmu";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <1800000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcca1v8_image: LDO_REG9 {
|
|
||||||
+ regulator-name = "vcca1v8_image";
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_3v3: SWITCH_REG1 {
|
|
||||||
+ regulator-name = "vcc_3v3";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc3v3_sd: SWITCH_REG2 {
|
|
||||||
+ regulator-name = "vcc3v3_sd";
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pinctrl {
|
|
||||||
+ leds {
|
|
||||||
+ led_user_en: led_user_en {
|
|
||||||
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pmic {
|
|
||||||
+ pmic_int: pmic_int {
|
|
||||||
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pmu_io_domains {
|
|
||||||
+ pmuio1-supply = <&vcc3v3_pmu>;
|
|
||||||
+ pmuio2-supply = <&vcc3v3_pmu>;
|
|
||||||
+ vccio1-supply = <&vccio_acodec>;
|
|
||||||
+ vccio2-supply = <&vcc_1v8>;
|
|
||||||
+ vccio3-supply = <&vccio_sd>;
|
|
||||||
+ vccio4-supply = <&vcc_1v8>;
|
|
||||||
+ vccio5-supply = <&vcc_3v3>;
|
|
||||||
+ vccio6-supply = <&vcc_1v8>;
|
|
||||||
+ vccio7-supply = <&vcc_3v3>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&saradc {
|
|
||||||
+ vref-supply = <&vcca_1v8>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&sdhci {
|
|
||||||
+ bus-width = <8>;
|
|
||||||
+ max-frequency = <200000000>;
|
|
||||||
+ non-removable;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
|
||||||
+ vmmc-supply = <&vcc_3v3>;
|
|
||||||
+ vqmmc-supply = <&vcc_1v8>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&tsadc {
|
|
||||||
+ rockchip,hw-tshut-mode = <1>;
|
|
||||||
+ rockchip,hw-tshut-polarity = <0>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&uart2 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb2phy0 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb2phy1 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb_host0_xhci {
|
|
||||||
+ extcon = <&usb2phy0>;
|
|
||||||
+};
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
|
|
||||||
@@ -0,0 +1,229 @@
|
|
||||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
||||||
+
|
|
||||||
+/dts-v1/;
|
|
||||||
+#include "rk3568-radxa-cm3i.dtsi"
|
|
||||||
+
|
|
||||||
+/ {
|
|
||||||
+ model = "Radxa E25";
|
|
||||||
+ compatible = "radxa,e25", "rockchip,rk3568";
|
|
||||||
+
|
|
||||||
+ aliases {
|
|
||||||
+ mmc0 = &sdmmc0;
|
|
||||||
+ mmc1 = &sdhci;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pwm-leds {
|
|
||||||
+ compatible = "pwm-leds-multicolor";
|
|
||||||
+
|
|
||||||
+ multi-led {
|
|
||||||
+ color = <LED_COLOR_ID_RGB>;
|
|
||||||
+ max-brightness = <255>;
|
|
||||||
+
|
|
||||||
+ led-red {
|
|
||||||
+ color = <LED_COLOR_ID_RED>;
|
|
||||||
+ pwms = <&pwm1 0 1000000 0>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ led-green {
|
|
||||||
+ color = <LED_COLOR_ID_GREEN>;
|
|
||||||
+ pwms = <&pwm2 0 1000000 0>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ led-blue {
|
|
||||||
+ color = <LED_COLOR_ID_BLUE>;
|
|
||||||
+ pwms = <&pwm12 0 1000000 0>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vbus_typec: vbus-typec-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ enable-active-high;
|
|
||||||
+ gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&vbus_typec_en>;
|
|
||||||
+ regulator-name = "vbus_typec";
|
|
||||||
+ regulator-min-microvolt = <5000000>;
|
|
||||||
+ regulator-max-microvolt = <5000000>;
|
|
||||||
+ vin-supply = <&vcc5v0_sys>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc3v3_minipcie: vcc3v3-minipcie-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ enable-active-high;
|
|
||||||
+ gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&minipcie_enable_h>;
|
|
||||||
+ regulator-name = "vcc3v3_minipcie";
|
|
||||||
+ regulator-min-microvolt = <5000000>;
|
|
||||||
+ regulator-max-microvolt = <5000000>;
|
|
||||||
+ vin-supply = <&vcc5v0_sys>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc3v3_ngff: vcc3v3-ngff-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ enable-active-high;
|
|
||||||
+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&ngffpcie_enable_h>;
|
|
||||||
+ regulator-name = "vcc3v3_ngff";
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+ vin-supply = <&vcc5v0_sys>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ /* actually fed by vcc5v0_sys, dependent
|
|
||||||
+ * on pi6c clock generator
|
|
||||||
+ */
|
|
||||||
+ vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ enable-active-high;
|
|
||||||
+ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&pcie30x1_enable_h>;
|
|
||||||
+ regulator-name = "vcc3v3_pcie30x1";
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+ vin-supply = <&vcc3v3_pi6c_05>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ enable-active-high;
|
|
||||||
+ gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&pcie_enable_h>;
|
|
||||||
+ regulator-name = "vcc3v3_pcie";
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+ vin-supply = <&vcc5v0_sys>;
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pcie2x1 {
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&pcie20_reset_h>;
|
|
||||||
+ reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ vpcie3v3-supply = <&vcc3v3_pi6c_05>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pcie30phy {
|
|
||||||
+ data-lanes = <1 2>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pcie3x1 {
|
|
||||||
+ num-lanes = <1>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&pcie30x1m0_pins>;
|
|
||||||
+ reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ vpcie3v3-supply = <&vcc3v3_pcie30x1>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pcie3x2 {
|
|
||||||
+ num-lanes = <1>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&pcie30x2_reset_h>;
|
|
||||||
+ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
|
|
||||||
+ vpcie3v3-supply = <&vcc3v3_pi6c_05>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pinctrl {
|
|
||||||
+ pcie {
|
|
||||||
+ pcie20_reset_h: pcie20-reset-h {
|
|
||||||
+ rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pcie30x1_enable_h: pcie30x1-enable-h {
|
|
||||||
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pcie30x2_reset_h: pcie30x2-reset-h {
|
|
||||||
+ rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pcie_enable_h: pcie-enable-h {
|
|
||||||
+ rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ usb {
|
|
||||||
+ minipcie_enable_h: minipcie-enable-h {
|
|
||||||
+ rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ ngffpcie_enable_h: ngffpcie-enable-h {
|
|
||||||
+ rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vbus_typec_en: vbus_typec_en {
|
|
||||||
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pwm1 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pwm2 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pwm12 {
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&pwm12m1_pins>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&sdmmc0 {
|
|
||||||
+ bus-width = <4>;
|
|
||||||
+ cap-sd-highspeed;
|
|
||||||
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
|
||||||
+ /* Also used in pcie30x1_clkreqnm0 */
|
|
||||||
+ disable-wp;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>;
|
|
||||||
+ sd-uhs-sdr104;
|
|
||||||
+ vmmc-supply = <&vcc3v3_sd>;
|
|
||||||
+ vqmmc-supply = <&vccio_sd>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb_host0_ehci {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb_host0_ohci {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb_host0_xhci {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb_host1_ehci {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb_host1_ohci {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb2phy0_otg {
|
|
||||||
+ phy-supply = <&vbus_typec>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb2phy1_host {
|
|
||||||
+ phy-supply = <&vcc3v3_minipcie>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&usb2phy1_otg {
|
|
||||||
+ phy-supply = <&vcc3v3_ngff>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
|
|
@ -1,48 +0,0 @@
|
||||||
From c80992abd2877590059e9cb254213c16824e2106 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Jagan Teki <jagan@amarulasolutions.com>
|
|
||||||
Date: Wed, 18 Jan 2023 13:34:53 +0530
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SoM
|
|
||||||
boards
|
|
||||||
|
|
||||||
Radxa has produced Compute Modules like RK3399pro VMARC and CM3i with
|
|
||||||
onboarding eMMC flash, so the eMMC is the primary MMC device.
|
|
||||||
|
|
||||||
On the other hand, Rockchip boot orders start from eMMC from an MMC
|
|
||||||
device perspective.
|
|
||||||
|
|
||||||
Mark, the eMMC has mmc0 to satisfy the above two conditions.
|
|
||||||
|
|
||||||
Reported-by: FUKAUMI Naoki <naoki@radxa.com>
|
|
||||||
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
|
|
||||||
Link: https://lore.kernel.org/r/20230118080454.11643-1-jagan@amarulasolutions.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 4 ++--
|
|
||||||
arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 3 +--
|
|
||||||
2 files changed, 3 insertions(+), 4 deletions(-)
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
|
|
||||||
@@ -13,8 +13,8 @@
|
|
||||||
compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
|
|
||||||
|
|
||||||
aliases {
|
|
||||||
- mmc0 = &sdmmc;
|
|
||||||
- mmc1 = &sdhci;
|
|
||||||
+ mmc0 = &sdhci;
|
|
||||||
+ mmc1 = &sdmmc;
|
|
||||||
};
|
|
||||||
|
|
||||||
vcc3v3_pcie: vcc-pcie-regulator {
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
|
|
||||||
@@ -8,8 +8,7 @@
|
|
||||||
compatible = "radxa,e25", "rockchip,rk3568";
|
|
||||||
|
|
||||||
aliases {
|
|
||||||
- mmc0 = &sdmmc0;
|
|
||||||
- mmc1 = &sdhci;
|
|
||||||
+ mmc1 = &sdmmc0;
|
|
||||||
};
|
|
||||||
|
|
||||||
pwm-leds {
|
|
||||||
|
|
@ -1,35 +0,0 @@
|
||||||
From c4d2b02d63ee38b381fbc886c02eecfec4f981cc Mon Sep 17 00:00:00 2001
|
|
||||||
From: Jagan Teki <jagan@amarulasolutions.com>
|
|
||||||
Date: Mon, 23 Jan 2023 12:46:51 +0530
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: Add missing CM3i fallback compatible
|
|
||||||
for Radxa E25
|
|
||||||
MIME-Version: 1.0
|
|
||||||
Content-Type: text/plain; charset=UTF-8
|
|
||||||
Content-Transfer-Encoding: 8bit
|
|
||||||
|
|
||||||
In order to function the Radxa E25 Carrier board, it is mandatory to
|
|
||||||
mount the Radxa CM3i module.
|
|
||||||
|
|
||||||
Add Radxa CM3i compatible as fallback compatible to string to satisfy
|
|
||||||
the Module and Carrier board topology.
|
|
||||||
|
|
||||||
Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
|
|
||||||
Cc: Chukun Pan <amadeus@jmu.edu.cn>
|
|
||||||
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
|
|
||||||
Link: https://lore.kernel.org/r/20230123071654.73139-2-jagan@amarulasolutions.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 2 +-
|
|
||||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
|
|
||||||
@@ -5,7 +5,7 @@
|
|
||||||
|
|
||||||
/ {
|
|
||||||
model = "Radxa E25";
|
|
||||||
- compatible = "radxa,e25", "rockchip,rk3568";
|
|
||||||
+ compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568";
|
|
||||||
|
|
||||||
aliases {
|
|
||||||
mmc1 = &sdmmc0;
|
|
||||||
|
|
@ -1,28 +0,0 @@
|
||||||
From ef9134d9bbce071c9e4ebdcbb6f8fb1a5dd0a67e Mon Sep 17 00:00:00 2001
|
|
||||||
From: Jagan Teki <jagan@amarulasolutions.com>
|
|
||||||
Date: Mon, 23 Jan 2023 12:46:53 +0530
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: Correct the model name for Radxa E25
|
|
||||||
|
|
||||||
Radxa E25 is a Carrier board, so update the model name for Radxa E25
|
|
||||||
as suggested by the Radxa website.
|
|
||||||
|
|
||||||
Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
|
|
||||||
Cc: Chukun Pan <amadeus@jmu.edu.cn>
|
|
||||||
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
|
|
||||||
Link: https://lore.kernel.org/r/20230123071654.73139-4-jagan@amarulasolutions.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 2 +-
|
|
||||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
|
|
||||||
@@ -4,7 +4,7 @@
|
|
||||||
#include "rk3568-radxa-cm3i.dtsi"
|
|
||||||
|
|
||||||
/ {
|
|
||||||
- model = "Radxa E25";
|
|
||||||
+ model = "Radxa E25 Carrier Board";
|
|
||||||
compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568";
|
|
||||||
|
|
||||||
aliases {
|
|
||||||
|
|
@ -1,79 +0,0 @@
|
||||||
From a87852e37f782257ebc57cc44a0d3fbf806471f6 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Jonas Karlman <jonas@kwiboo.se>
|
|
||||||
Date: Mon, 24 Jul 2023 14:52:16 +0000
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: Fix PCIe regulators on Radxa E25
|
|
||||||
|
|
||||||
Despite its name, the regulator vcc3v3_pcie30x1 has nothing to do with
|
|
||||||
pcie30x1. Instead, it supply power to VBAT1-5 on the M.2 KEY B port as
|
|
||||||
seen on page 8 of the schematic [1].
|
|
||||||
|
|
||||||
pcie30x1 is used for the mini PCIe slot, and as seen on page 9 the
|
|
||||||
vcc3v3_minipcie regulator is instead related to pcie30x1.
|
|
||||||
|
|
||||||
The M.2 KEY B port can be used for WWAN USB2 modules or SATA drives.
|
|
||||||
|
|
||||||
Use correct regulator vcc3v3_minipcie for pcie30x1.
|
|
||||||
|
|
||||||
[1] https://dl.radxa.com/cm3p/e25/radxa-e25-v1.4-sch.pdf
|
|
||||||
|
|
||||||
Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
|
|
||||||
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
|
|
||||||
Link: https://lore.kernel.org/r/20230724145213.3833099-1-jonas@kwiboo.se
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
.../arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 16 ++++++++--------
|
|
||||||
1 file changed, 8 insertions(+), 8 deletions(-)
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
|
|
||||||
@@ -47,6 +47,9 @@
|
|
||||||
vin-supply = <&vcc5v0_sys>;
|
|
||||||
};
|
|
||||||
|
|
||||||
+ /* actually fed by vcc5v0_sys, dependent
|
|
||||||
+ * on pi6c clock generator
|
|
||||||
+ */
|
|
||||||
vcc3v3_minipcie: vcc3v3-minipcie-regulator {
|
|
||||||
compatible = "regulator-fixed";
|
|
||||||
enable-active-high;
|
|
||||||
@@ -54,9 +57,9 @@
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&minipcie_enable_h>;
|
|
||||||
regulator-name = "vcc3v3_minipcie";
|
|
||||||
- regulator-min-microvolt = <5000000>;
|
|
||||||
- regulator-max-microvolt = <5000000>;
|
|
||||||
- vin-supply = <&vcc5v0_sys>;
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+ vin-supply = <&vcc3v3_pi6c_05>;
|
|
||||||
};
|
|
||||||
|
|
||||||
vcc3v3_ngff: vcc3v3-ngff-regulator {
|
|
||||||
@@ -71,9 +74,6 @@
|
|
||||||
vin-supply = <&vcc5v0_sys>;
|
|
||||||
};
|
|
||||||
|
|
||||||
- /* actually fed by vcc5v0_sys, dependent
|
|
||||||
- * on pi6c clock generator
|
|
||||||
- */
|
|
||||||
vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
|
|
||||||
compatible = "regulator-fixed";
|
|
||||||
enable-active-high;
|
|
||||||
@@ -83,7 +83,7 @@
|
|
||||||
regulator-name = "vcc3v3_pcie30x1";
|
|
||||||
regulator-min-microvolt = <3300000>;
|
|
||||||
regulator-max-microvolt = <3300000>;
|
|
||||||
- vin-supply = <&vcc3v3_pi6c_05>;
|
|
||||||
+ vin-supply = <&vcc5v0_sys>;
|
|
||||||
};
|
|
||||||
|
|
||||||
vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
|
|
||||||
@@ -117,7 +117,7 @@
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pcie30x1m0_pins>;
|
|
||||||
reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
|
|
||||||
- vpcie3v3-supply = <&vcc3v3_pcie30x1>;
|
|
||||||
+ vpcie3v3-supply = <&vcc3v3_minipcie>;
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
|
|
@ -1,41 +0,0 @@
|
||||||
From 2bdfe84fbd57a4ed9fd65a67210442559ce078f0 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Jonas Karlman <jonas@kwiboo.se>
|
|
||||||
Date: Mon, 24 Jul 2023 14:52:16 +0000
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: Enable SATA on Radxa E25
|
|
||||||
|
|
||||||
The M.2 KEY B port can be used for WWAN USB2 modules or SATA drives.
|
|
||||||
|
|
||||||
Enable sata1 node to fix use of SATA drives on the M.2 slot.
|
|
||||||
|
|
||||||
Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
|
|
||||||
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
|
|
||||||
Link: https://lore.kernel.org/r/20230724145213.3833099-1-jonas@kwiboo.se
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 8 ++++++++
|
|
||||||
1 file changed, 8 insertions(+)
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
|
|
||||||
@@ -99,6 +99,10 @@
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
+&combphy1 {
|
|
||||||
+ phy-supply = <&vcc3v3_pcie30x1>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
&pcie2x1 {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pcie20_reset_h>;
|
|
||||||
@@ -178,6 +182,10 @@
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
+&sata1 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
&sdmmc0 {
|
|
||||||
bus-width = <4>;
|
|
||||||
cap-sd-highspeed;
|
|
||||||
|
|
@ -1,40 +0,0 @@
|
||||||
From a2ac2a1b02590a22a236c43c455f421cdede45f5 Mon Sep 17 00:00:00 2001
|
|
||||||
From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
|
|
||||||
Date: Thu, 14 Mar 2024 15:24:35 +0300
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: set PHY address of MT7531 switch to
|
|
||||||
0x1f
|
|
||||||
MIME-Version: 1.0
|
|
||||||
Content-Type: text/plain; charset=UTF-8
|
|
||||||
Content-Transfer-Encoding: 8bit
|
|
||||||
|
|
||||||
The MT7531 switch listens on PHY address 0x1f on an MDIO bus. I've got two
|
|
||||||
findings that support this. There's no bootstrapping option to change the
|
|
||||||
PHY address of the switch. The Linux driver hardcodes 0x1f as the PHY
|
|
||||||
address of the switch. So the reg property on the device tree is currently
|
|
||||||
ignored by the Linux driver.
|
|
||||||
|
|
||||||
Therefore, describe the correct PHY address on Banana Pi BPI-R2 Pro that
|
|
||||||
has this switch.
|
|
||||||
|
|
||||||
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
|
|
||||||
Fixes: c1804463e5c6 ("arm64: dts: rockchip: Add mt7531 dsa node to BPI-R2-Pro board")
|
|
||||||
Link: https://lore.kernel.org/r/20240314-for-rockchip-mt7531-phy-address-v1-1-743b5873358f@arinc9.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 4 ++--
|
|
||||||
1 file changed, 2 insertions(+), 2 deletions(-)
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
|
|
||||||
@@ -521,9 +521,9 @@
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <0>;
|
|
||||||
|
|
||||||
- switch@0 {
|
|
||||||
+ switch@1f {
|
|
||||||
compatible = "mediatek,mt7531";
|
|
||||||
- reg = <0>;
|
|
||||||
+ reg = <0x1f>;
|
|
||||||
|
|
||||||
ports {
|
|
||||||
#address-cells = <1>;
|
|
||||||
|
|
@ -1,33 +0,0 @@
|
||||||
From 433d54818f64a2fe0562f8c04c7a81f562368515 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
|
|
||||||
Date: Tue, 5 Mar 2024 15:32:18 +0100
|
|
||||||
Subject: [PATCH] arm64: dts: rockchip: regulator for sd needs to be always on
|
|
||||||
for BPI-R2Pro
|
|
||||||
|
|
||||||
With default dts configuration for BPI-R2Pro, the regulator for sd card is
|
|
||||||
powered off when reboot is commanded, and the only solution to detect the
|
|
||||||
sd card again, and therefore, allow rebooting from there, is to do a
|
|
||||||
hardware reset.
|
|
||||||
|
|
||||||
Configure the regulator for sd to be always on for BPI-R2Pro in order to
|
|
||||||
avoid this issue.
|
|
||||||
|
|
||||||
Fixes: f901aaadaa2a ("arm64: dts: rockchip: Add Bananapi R2 Pro")
|
|
||||||
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
|
|
||||||
Link: https://lore.kernel.org/r/20240305143222.189413-1-jtornosm@redhat.com
|
|
||||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
||||||
---
|
|
||||||
arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 2 ++
|
|
||||||
1 file changed, 2 insertions(+)
|
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
|
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
|
|
||||||
@@ -412,6 +412,8 @@
|
|
||||||
|
|
||||||
vccio_sd: LDO_REG5 {
|
|
||||||
regulator-name = "vccio_sd";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
regulator-min-microvolt = <1800000>;
|
|
||||||
regulator-max-microvolt = <3300000>;
|
|
||||||
|
|
||||||
|
|
@ -55,9 +55,9 @@ Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
||||||
|
|
||||||
--- a/drivers/char/hw_random/Kconfig
|
--- a/drivers/char/hw_random/Kconfig
|
||||||
+++ b/drivers/char/hw_random/Kconfig
|
+++ b/drivers/char/hw_random/Kconfig
|
||||||
@@ -549,6 +549,20 @@ config HW_RANDOM_CN10K
|
@@ -573,6 +573,20 @@ config HW_RANDOM_JH7110
|
||||||
To compile this driver as a module, choose M here.
|
To compile this driver as a module, choose M here.
|
||||||
The module will be called cn10k_rng. If unsure, say Y.
|
The module will be called jh7110-trng.
|
||||||
|
|
||||||
+config HW_RANDOM_ROCKCHIP
|
+config HW_RANDOM_ROCKCHIP
|
||||||
+ tristate "Rockchip True Random Number Generator"
|
+ tristate "Rockchip True Random Number Generator"
|
||||||
|
|
@ -78,11 +78,12 @@ Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
||||||
config UML_RANDOM
|
config UML_RANDOM
|
||||||
--- a/drivers/char/hw_random/Makefile
|
--- a/drivers/char/hw_random/Makefile
|
||||||
+++ b/drivers/char/hw_random/Makefile
|
+++ b/drivers/char/hw_random/Makefile
|
||||||
@@ -47,3 +47,4 @@ obj-$(CONFIG_HW_RANDOM_XIPHERA) += xiphe
|
@@ -48,4 +48,5 @@ obj-$(CONFIG_HW_RANDOM_XIPHERA) += xiphe
|
||||||
obj-$(CONFIG_HW_RANDOM_ARM_SMCCC_TRNG) += arm_smccc_trng.o
|
obj-$(CONFIG_HW_RANDOM_ARM_SMCCC_TRNG) += arm_smccc_trng.o
|
||||||
obj-$(CONFIG_HW_RANDOM_CN10K) += cn10k-rng.o
|
obj-$(CONFIG_HW_RANDOM_CN10K) += cn10k-rng.o
|
||||||
obj-$(CONFIG_HW_RANDOM_POLARFIRE_SOC) += mpfs-rng.o
|
obj-$(CONFIG_HW_RANDOM_POLARFIRE_SOC) += mpfs-rng.o
|
||||||
+obj-$(CONFIG_HW_RANDOM_ROCKCHIP) += rockchip-rng.o
|
+obj-$(CONFIG_HW_RANDOM_ROCKCHIP) += rockchip-rng.o
|
||||||
|
obj-$(CONFIG_HW_RANDOM_JH7110) += jh7110-trng.o
|
||||||
--- /dev/null
|
--- /dev/null
|
||||||
+++ b/drivers/char/hw_random/rockchip-rng.c
|
+++ b/drivers/char/hw_random/rockchip-rng.c
|
||||||
@@ -0,0 +1,251 @@
|
@@ -0,0 +1,251 @@
|
||||||
|
|
|
||||||
|
|
@ -38,7 +38,7 @@ Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
||||||
|
|
||||||
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
|
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
|
||||||
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
|
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
|
||||||
@@ -1773,6 +1773,15 @@
|
@@ -1807,6 +1807,15 @@
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue