Difuse/difos
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

ipq40xx: Convert openmesh,a42 to DSA

Browse source 
* ethernet1:

  - physical port label "Ethernet 1"
  - can be used to power the device
  - its mac address is printed on the device label

* ethernet2:

  - physical port label "Ethernet 2"

Both ports are not marked by there role (because the vendor firmware
automatically detects roles) but the "Ethernet 1" port was used in the past
for "WAN" functionality in OpenWrt.

Reviewed-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
This commit is contained in:
Sven Eckelmann 2022-10-24 18:55:44 +02:00 committed by Hauke Mehrtens
parent 65d9a715fc
commit 66a3c32b47
4 changed files with 33 additions and 6 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
target/linux/ipq40xx/base-files/etc/board.d/02_network
View file

@ -73,6 +73,9 @@ ipq40xx_setup_interfaces()
netgear,srs60)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
;;
openmesh,a42)
ucidef_set_interfaces_lan_wan "ethernet2" "ethernet1"
;;
zte,mf286d)
ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
;;
@ -159,6 +162,9 @@ ipq40xx_setup_macs()
pakedge,wr-1)
wan_mac=$(macaddr_add $(get_mac_label) 1)
;;
openmesh,a42)
label_mac="$(mtd_get_mac_binary "0:ART" 0x0)"
;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac

4
target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
View file

@ -29,6 +29,10 @@ preinit_set_mac_address() {
ip link set dev lan1 address $(macaddr_add "$base_mac" 1)
ip link set dev eth0 address $(macaddr_setbit "$base_mac" 7)
;;
openmesh,a42)
ip link set dev ethernet1 address $(mtd_get_mac_binary "0:ART" 0x0)
ip link set dev ethernet2 address $(mtd_get_mac_binary "0:ART" 0x6)
;;
mikrotik,wap-ac)
base_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
ip link set dev sw-eth1 address "$base_mac"

26
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts
View file

@ -17,10 +17,6 @@
status = "okay";
};
mdio@90000 {
status = "okay";
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
@ -166,6 +162,28 @@
status = "okay";
};
&mdio {
status = "okay";
};
&gmac {
status = "okay";
};
&switch {
status = "okay";
};
&swport4 {
status = "okay";
label = "ethernet2";
};
&swport5 {
status = "okay";
label = "ethernet1";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "OM-A42";

3
target/linux/ipq40xx/image/generic.mk
View file

@ -888,8 +888,7 @@ define Device/openmesh_a42
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
endef
# Missing DSA Setup
#TARGET_DEVICES += openmesh_a42
TARGET_DEVICES += openmesh_a42
define Device/openmesh_a62
$(call Device/FitImageLzma)