Difuse/difos
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

mediatek: add support for Cudy TR3000 256MB v1 flash version

Browse source 
This device is similar to the Cudy TR3000 v1 128MB version.
The difference is that the flash memory is 128mb and the other is 256mb

Hardware:
 - SoC: MediaTek MT7981B
 - CPU: 2x 1.3 GHz Cortex-A53
 - Flash: 256 MiB SPI NAND
 - RAM: 512 MiB
 - WLAN: 2.4 GHz, 5 GHz (MediaTek MT7976CN, 802.11ax)
 - Ethernet: 1x 10/100/1000/2500 Mbps RTL8221B WAN, 1x10/100/1000 Mbps MT7981 LAN
 - USB 3.0 port
 - Buttons: 1 Reset button, 1 slider button
 - LEDs: 1x Red, 1x White
 - Power: 5 VDC, 3 A

Installation:
Cudy has distributed intermediate firmware to make installation easier
1. Go to [Cudy CN official website](https://www.cudy.com/zh-cn/pages/download-center/tr3000-1-0) and download the intermediate firmware
2. Upgrade the intermediate firmware on the page
3. Visit the intermediate firmware 192.168.1.1 webpage and use the sysupgrade image to update

other:
If you fail to flash the device, you can use TFTP to flash back to the original firmware.
1. Ask Cudy CN official customer service for the original firmware
2. With the router off, press the RESET button. While the router is turning on, the button should continue to be pressed for at least 5 seconds.
3. A u-boot shell will automatically open.
4. Connect to LAN and set your IP to 192.168.1.88/24. Configure a TFTP server and an recovery.bin firmware file.

Signed-off-by: cheng wang <typedelta@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19167
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
cheng wang 2025-06-22 08:44:30 +08:00 committed by Hauke Mehrtens
parent e7044dce96
commit 594da824a4
5 changed files with 46 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
View file

@ -1,6 +1,7 @@
set_preinit_iface() {
case $(board_name) in
cudy,m3000-v1|\
cudy,tr3000-256mb-v1|\
cudy,tr3000-v1|\
cudy,tr3000-v1-ubootmod|\
glinet,gl-mt2500|\

26
target/linux/mediatek/dts/mt7981b-cudy-tr3000-256mb-v1.dts Normal file
View file

@ -0,0 +1,26 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
#include "mt7981b-cudy-tr3000-v1.dtsi"
/ {
model = "Cudy TR3000 256MB v1";
compatible = "cudy,tr3000-256mb-v1", "mediatek,mt7981";
};
&spi_nand {
spi-cal-enable;
spi-cal-mode = "read-data";
spi-cal-datalen = <7>;
spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
spi-cal-addrlen = <5>;
spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
mediatek,nmbm;
mediatek,bmt-max-ratio = <1>;
mediatek,bmt-max-reserved-blocks = <64>;
};
&ubi {
reg = <0x5c0000 0xe600000>;
};

1
target/linux/mediatek/filogic/base-files/etc/board.d/02_network
View file

@ -97,6 +97,7 @@ mediatek_setup_interfaces()
ucidef_set_interface_lan "eth0"
;;
cudy,m3000-v1|\
cudy,tr3000-256mb-v1|\
cudy,tr3000-v1|\
cudy,tr3000-v1-ubootmod|\
glinet,gl-mt2500|\

1
target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
View file

@ -79,6 +79,7 @@ case "$board" in
cudy,ap3000-v1|\
cudy,m3000-v1|\
cudy,re3000-v1|\
cudy,tr3000-256mb-v1|\
cudy,tr3000-v1|\
cudy,tr3000-v1-ubootmod|\
cudy,wr3000e-v1|\

17
target/linux/mediatek/image/filogic.mk
View file

@ -762,6 +762,23 @@ define Device/cudy_re3000-v1
endef
TARGET_DEVICES += cudy_re3000-v1
define Device/cudy_tr3000-256mb-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := TR3000
DEVICE_VARIANT := 256mb v1
DEVICE_DTS := mt7981b-cudy-tr3000-256mb-v1
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += R103
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 235520k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_tr3000-256mb-v1
define Device/cudy_tr3000-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := TR3000