Difuse/difos
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

ipq807x: add support for Netgear RAX120v2

Browse source 
Netgear Nighthawk RAX120v2 AX WIFI router with 5 1G and 1 5G ports.

The majority of the code is based on @jewwest's PR #11830.

Specifications:
    * CPU: Qualcomm IPQ8074 Quad core Cortex-A53 2.2GHz
    * RAM: 1024MB of DDR3 (Nanya NT5CC256M16EP-EK × 2)
    * Flash: SPI-NAND 512 MiB (Winbond W29N04GZBIBA)
    * Ethernet: 4x 10/100/1000 Mbps LAN,
                1x 10/100/1000 Mbps WAN (Qualcomm QCA8075),
                1x 10/100/1000/2500/5000 Mbps LAN/WAN (Aquantia AQR111B0 PHY)
    * Wi-Fi:
        * 2.4 GHz: Qualcomm QCN5024 4x4
        * 2x 5 GHz: Qualcomm QCN5054 4x4
    * USB: 2x USB 3.0
    * LEDs: Power, 2.4GHz & 5GHz Radio, WPS, WAN, USB1 & USB2, 5G LAN
    * Keys: LEDs On/Off, Power, Reset, RFKILL, WPS
    * UART: Marked J9003 VCC TX RX GND, beginning from "1". 3.3v, 115200n8
    * Power: 19 VDC, 3.1 A

Installation:
    * Flashing OpenWrt is done in two steps:
        a) Flash *-squashfs-web-ui-factory.img from stock UI (thanks to @wangyu-).
           This writes an initramfs based OpenWrt image onto the RAX120v2
        b) From OpenWrt flash the *-squashfs-sysupgrade.bin using LuCI or the commandline

    * U-Boot allows booting an initramfs image via TFTP:
    - Set ip of your PC to 192.168.1.100
        - At the serial console interrupt boot at "Hit any key to stop autoboot:"
        - In u-boot run `tftpsrv`
        - On your PC send the OpenWrt initramfs image:

          tftp 192.168.1.1 -m binary -c put openwrt-ipq807x-generic-netgear_rax120v2-initramfs-uImage.itb

Make 5G Aquantia phy work:
    For the 5G port labeled 'lan5' to work a firmware is needed. This can be loaded in
    u-boot by writing the firmware to the correct mtd partition.

    The firmware file found in the Netgear stock firmware under /lib/firmware/ named
    'AQR-G3_v4.3.C-AQR_DNI_DR-EQ35AX8-R-prov1_ID23888_VER1311.cld' is needed and has to
    be converted to a MBN file.

    The `mkheader.py` script used here can be found in the Netgear V1.2.8.40 GPL source,
    under 'git_home/u-boot.git/tools/mkheader.py'

    Convert the CLD file to MBN using:
    $ python2 mkheader.py 0x44000000 0x13 <*.cld file> aqr_4.3.C.mbn

    This MBN file can then be flashed to the MTD partition to be used by u-boot.

    The necessary files can also be found in
        https://github.com/boretom/openwrt-fork/tree/rax120v2/aquantia-firmware

    * Write MBN file to MTD partition to be loaded automatically by u-boot:

      U-boot automatically tries to load the firmware from nand at address 0x7e00000 which
      corresponds to `/dev/mtd25` in OpenWrt.

        - find ETHPHYFW partition while running OpenWrt (expected: /dev/mtd25)

          $ fgrep -i 'ethphyfw' /proc/mtd
          mtd25: 00080000 00020000 "ethphyfw

        - copy mbn file to /tmp/ folder of the router

          $ scp aqr-v4.3.C.mbn 192.168.1.1:/tmp/

        - write mbn file to ethphyfw partition

          $ mtd write /tmp/aqr_v4.3.C.mbn /dev/mtd25

Revert to stock firmware:
    * Flash the stock firmware to the bootloader using TFTP/NMRP.

References to RAX120v2 GPL source:
    https://www.downloads.netgear.com/files/GPL/RAX120-V1.2.8.40_gpl_src.zip

Reviewed-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Thomas Kupper <thomas.kupper@gmail.com>
This commit is contained in:
Thomas Kupper 2023-05-05 17:04:33 +02:00 committed by Hauke Mehrtens
parent 8ae8612210
commit 4d79a65d60
10 changed files with 807 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
package/boot/uboot-envtools/files/qualcommax_ipq807x
View file

@ -9,6 +9,7 @@ board=$(board_name)
case "$board" in
dynalink,dl-wrx36|\
netgear,rax120v2|\
netgear,wax218)
idx="$(find_mtd_index 0:appsblenv)"
[ -n "$idx" ] && \

2
package/firmware/ipq-wifi/Makefile
View file

@ -33,6 +33,7 @@ ALLWIFIBOARDS:= \
dynalink_dl-wrx36 \
edgecore_eap102 \
edimax_cax1800 \
netgear_rax120v2 \
netgear_wax218 \
prpl_haze \
qnap_301w \
@ -121,6 +122,7 @@ $(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873))
$(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
$(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
$(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
$(eval $(call generate-ipq-wifi-package,netgear_rax120v2,Netgear RAX120v2))
$(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218))
$(eval $(call generate-ipq-wifi-package,qnap_301w,QNAP 301w))
$(eval $(call generate-ipq-wifi-package,prpl_haze,prpl Haze))

109
target/linux/generic/hack-5.15/726-net-phy-aquantia-enable-AQR111-and-AQR111B0.patch Normal file
View file

@ -0,0 +1,109 @@
Author: Thomas Kupper <thomas.kupper@gmail.com>
Date: Wed May 24 21:14:17 2023 +0200
kernel: phy: add Aquantia PHY AQR111 & AQR111B0
Add the IDs for Aquantia PHY AQR111 and AQR111B0 as found in the GPL sources
of the Netgear RAX120v2 firmware v1.2.8.40.
This is a 5GbE chip but it reports support for 10G. Implement config_init()
to set max speed to 5G.
Signed-off-by: Thomas Kupper <thomas.kupper@gmail.com>
--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -20,6 +20,8 @@
#define PHY_ID_AQR105 0x03a1b4a2
#define PHY_ID_AQR106 0x03a1b4d0
#define PHY_ID_AQR107 0x03a1b4e0
+#define PHY_ID_AQR111 0x03a1b610
+#define PHY_ID_AQR111B0 0x03a1b612
#define PHY_ID_AQR112 0x03a1b662
#define PHY_ID_AQR112C 0x03a1b790
#define PHY_ID_AQR112R 0x31c31d12
@@ -686,6 +688,33 @@ static int aqcs109_config_init(struct ph
return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
}
+static int aqr111_config_init(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Check that the PHY interface type is compatible */
+ if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
+ phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
+ phydev->interface != PHY_INTERFACE_MODE_XGMII &&
+ phydev->interface != PHY_INTERFACE_MODE_USXGMII &&
+ phydev->interface != PHY_INTERFACE_MODE_10GKR &&
+ phydev->interface != PHY_INTERFACE_MODE_10GBASER)
+ return -ENODEV;
+
+ WARN(phydev->interface == PHY_INTERFACE_MODE_XGMII,
+ "Your devicetree is out of date, please update it. The AQR107 family doesn't support XGMII, maybe you mean USXGMII.\n");
+
+ ret = aqr107_wait_reset_complete(phydev);
+ if (!ret)
+ aqr107_chip_info(phydev);
+
+ /* AQR111 reports supporting speed up to 10G, however only speeds up to 5G are supported. */
+ ret = phy_set_max_speed(phydev, SPEED_5000);
+ if (ret)
+ return ret;
+
+ return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
+}
static void aqr107_link_change_notify(struct phy_device *phydev)
{
u8 fw_major, fw_minor;
@@ -905,6 +934,42 @@ static struct phy_driver aqr_driver[] =
.link_change_notify = aqr107_link_change_notify,
},
{
+ PHY_ID_MATCH_MODEL(PHY_ID_AQR111),
+ .name = "Aquantia AQR111",
+ .probe = aqr107_probe,
+ .config_init = aqr111_config_init,
+ .config_aneg = aqr_config_aneg,
+ .config_intr = aqr_config_intr,
+ .handle_interrupt = aqr_handle_interrupt,
+ .read_status = aqr107_read_status,
+ .get_tunable = aqr107_get_tunable,
+ .set_tunable = aqr107_set_tunable,
+ .suspend = aqr107_suspend,
+ .resume = aqr107_resume,
+ .get_sset_count = aqr107_get_sset_count,
+ .get_strings = aqr107_get_strings,
+ .get_stats = aqr107_get_stats,
+ .link_change_notify = aqr107_link_change_notify,
+},
+{
+ PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0),
+ .name = "Aquantia AQR111B0",
+ .probe = aqr107_probe,
+ .config_init = aqr111_config_init,
+ .config_aneg = aqr_config_aneg,
+ .config_intr = aqr_config_intr,
+ .handle_interrupt = aqr_handle_interrupt,
+ .read_status = aqr107_read_status,
+ .get_tunable = aqr107_get_tunable,
+ .set_tunable = aqr107_set_tunable,
+ .suspend = aqr107_suspend,
+ .resume = aqr107_resume,
+ .get_sset_count = aqr107_get_sset_count,
+ .get_strings = aqr107_get_strings,
+ .get_stats = aqr107_get_stats,
+ .link_change_notify = aqr107_link_change_notify,
+},
+{
PHY_ID_MATCH_MODEL(PHY_ID_AQR112),
.name = "Aquantia AQR112",
.probe = aqr107_probe,
@@ -970,6 +1035,8 @@ static struct mdio_device_id __maybe_unu
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR105) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR111) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR112C) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR112R) },

110
target/linux/generic/hack-6.1/726-net-phy-aquantia-enable-AQR111-and-AQR111B0.patch Normal file
View file

@ -0,0 +1,110 @@
Author: Thomas Kupper <thomas.kupper@gmail.com>
Date: Wed May 24 21:14:17 2023 +0200
kernel: phy: add Aquantia PHY AQR111 & AQR111B0
Add the IDs for Aquantia PHY AQR111 and AQR111B0 as found in the GPL sources
of the Netgear RAX120v2 firmware v1.2.8.40.
This is a 5GbE chip but it reports support for 10G. Implement config_init()
to set max speed to 5G.
Signed-off-by: Thomas Kupper <thomas.kupper@gmail.com>
--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -24,6 +24,8 @@
#define PHY_ID_AQR405 0x03a1b4b0
#define PHY_ID_AQR113C 0x31c31c12
#define PHY_ID_AQR813 0x31c31cb2
+#define PHY_ID_AQR111 0x03a1b610
+#define PHY_ID_AQR111B0 0x03a1b612
#define PHY_ID_AQR112 0x03a1b662
#define PHY_ID_AQR412 0x03a1b712
#define PHY_ID_AQR113 0x31c31c40
@@ -729,6 +731,34 @@ static int aqcs109_config_init(struct ph
return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
}
+static int aqr111_config_init(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Check that the PHY interface type is compatible */
+ if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
+ phydev->interface != PHY_INTERFACE_MODE_1000BASEKX &&
+ phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
+ phydev->interface != PHY_INTERFACE_MODE_XGMII &&
+ phydev->interface != PHY_INTERFACE_MODE_USXGMII &&
+ phydev->interface != PHY_INTERFACE_MODE_10GKR &&
+ phydev->interface != PHY_INTERFACE_MODE_10GBASER &&
+ phydev->interface != PHY_INTERFACE_MODE_XAUI &&
+ phydev->interface != PHY_INTERFACE_MODE_RXAUI)
+ return -ENODEV;
+
+ WARN(phydev->interface == PHY_INTERFACE_MODE_XGMII,
+ "Your devicetree is out of date, please update it. The AQR107 family doesn't support XGMII, maybe you mean USXGMII.\n");
+
+ ret = aqr107_wait_reset_complete(phydev);
+ if (!ret)
+ aqr107_chip_info(phydev);
+
+ /* AQR111 reports supporting speed up to 10G, however only speeds up to 5G are supported. */
+ phy_set_max_speed(phydev, SPEED_5000);
+
+ return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
+}
static void aqr107_link_change_notify(struct phy_device *phydev)
{
u8 fw_major, fw_minor;
@@ -961,6 +991,42 @@ static struct phy_driver aqr_driver[] =
.link_change_notify = aqr107_link_change_notify,
},
{
+ PHY_ID_MATCH_MODEL(PHY_ID_AQR111),
+ .name = "Aquantia AQR111",
+ .probe = aqr107_probe,
+ .config_init = aqr111_config_init,
+ .config_aneg = aqr_config_aneg,
+ .config_intr = aqr_config_intr,
+ .handle_interrupt = aqr_handle_interrupt,
+ .read_status = aqr107_read_status,
+ .get_tunable = aqr107_get_tunable,
+ .set_tunable = aqr107_set_tunable,
+ .suspend = aqr107_suspend,
+ .resume = aqr107_resume,
+ .get_sset_count = aqr107_get_sset_count,
+ .get_strings = aqr107_get_strings,
+ .get_stats = aqr107_get_stats,
+ .link_change_notify = aqr107_link_change_notify,
+},
+{
+ PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0),
+ .name = "Aquantia AQR111B0",
+ .probe = aqr107_probe,
+ .config_init = aqr111_config_init,
+ .config_aneg = aqr_config_aneg,
+ .config_intr = aqr_config_intr,
+ .handle_interrupt = aqr_handle_interrupt,
+ .read_status = aqr107_read_status,
+ .get_tunable = aqr107_get_tunable,
+ .set_tunable = aqr107_set_tunable,
+ .suspend = aqr107_suspend,
+ .resume = aqr107_resume,
+ .get_sset_count = aqr107_get_sset_count,
+ .get_strings = aqr107_get_strings,
+ .get_stats = aqr107_get_stats,
+ .link_change_notify = aqr107_link_change_notify,
+},
+{
PHY_ID_MATCH_MODEL(PHY_ID_AQR112),
.name = "Aquantia AQR112",
.probe = aqr107_probe,
@@ -1030,6 +1096,8 @@ static struct mdio_device_id __maybe_unu
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR111) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR412) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113) },

553
target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-rax120v2.dts Normal file
View file

@ -0,0 +1,553 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ipq8074.dtsi"
#include "ipq8074-ess.dtsi"
#include "ipq8074-hk-cpu.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Netgear RAX120v2";
compatible = "netgear,rax120v2", "qcom,ipq8074";
aliases {
serial0 = &blsp1_uart5;
led-running = &led_system_white;
led-upgrade = &led_system_white;
led-internet = &led_wan_white;
label-mac-device = &dp1;
};
chosen {
stdout-path = "serial0:115200n8";
bootargs-append = " ubi.mtd=rootfs root=/dev/ubiblock0_0";
};
keys {
compatible = "gpio-keys";
rfkill {
label = "rfkill";
gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
wps {
label = "wps";
gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
led_spi {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
sck-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
mosi-gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
led_gpio: led_gpio@0 {
compatible = "fairchild,74hc595";
reg = <0>;
gpio-controller;
#gpio-cells = <2>;
registers-number = <2>;
enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
spi-max-frequency = <1000000>;
};
};
leds {
compatible = "gpio-leds";
led_system_white: system-white {
label = "white:system";
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_WHITE>;
};
led_24g_white {
label = "white:24g";
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_WHITE>;
linux,default-trigger = "phy1radio";
};
led_5g_white {
label = "white:5g";
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_WHITE>;
linux,default-trigger = "phy0radio";
};
led_usb1_white {
label = "white:usb1";
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_WHITE>;
};
led_usb2_white {
label = "white:usb2";
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_WHITE>;
};
led_wan_white: wan-white {
label = "white:wan";
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_WHITE>;
};
led_aqr_green {
label = "green:aqr";
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_GREEN>;
};
led_aqr_red {
label = "red:aqr";
gpios = <&led_gpio 10 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_RED>;
};
led_aqr_white {
label = "white:aqr";
gpios = <&led_gpio 11 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_WHITE>;
};
led_wps_white {
label = "white:wps";
gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_WHITE>;
};
};
};
&tlmm {
mdio_pins: mdio-pins {
mdc {
pins = "gpio68";
function = "mdc";
drive-strength = <8>;
bias-pull-up;
};
mdio {
pins = "gpio69";
function = "mdio";
drive-strength = <8>;
bias-pull-up;
};
};
};
&mdio {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
qca8075_0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
qca8075_1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
qca8075_2: ethernet-phy@2 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <2>;
};
qca8075_3: ethernet-phy@3 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <3>;
};
qca8075_4: ethernet-phy@4 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <4>;
};
aqr111b0: ethernet-phy@7 {
compatible ="ethernet-phy-ieee802.3-c45";
reg = <7>;
reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
};
};
&switch {
status = "okay";
switch_lan_bmp = <0x3e>; /* lan port bitmap */
switch_wan_bmp = <0x40>; /* wan port bitmap */
switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
switch_mac_mode2 = <0xd>; /* mac mode for uniphy instance2*/
bm_tick_mode = <0>; /* bm tick mode */
tm_tick_mode = <0>; /* tm tick mode */
qcom,port_phyinfo {
port@1 {
port_id = <1>;
phy_address = <0>;
};
port@2 {
port_id = <2>;
phy_address = <1>;
};
port@3 {
port_id = <3>;
phy_address = <2>;
};
port@4 {
port_id = <4>;
phy_address = <3>;
};
port@5 {
port_id = <5>;
phy_address = <4>;
};
port@6 {
port_id = <6>;
phy_address = <7>;
compatible = "ethernet-phy-ieee802.3-c45";
ethernet-phy-ieee802.3-c45;
};
};
};
&edma {
status = "okay";
};
&dp1 {
status = "okay";
phy-handle = <&qca8075_0>;
label = "lan4";
nvmem-cells = <&macaddr_dp1>;
nvmem-cell-names = "mac-address";
};
&dp2 {
status = "okay";
phy-handle = <&qca8075_1>;
label = "lan3";
nvmem-cells = <&macaddr_dp2>;
nvmem-cell-names = "mac-address";
};
&dp3 {
status = "okay";
phy-handle = <&qca8075_2>;
label = "lan2";
nvmem-cells = <&macaddr_dp3>;
nvmem-cell-names = "mac-address";
};
&dp4 {
status = "okay";
phy-handle = <&qca8075_3>;
label = "lan1";
nvmem-cells = <&macaddr_dp4>;
nvmem-cell-names = "mac-address";
};
&dp5 {
status = "okay";
phy-handle = <&qca8075_4>;
label = "wan";
nvmem-cells = <&macaddr_dp5>;
nvmem-cell-names = "mac-address";
};
&dp6_syn {
status = "okay";
phy-handle = <&aqr111b0>;
label = "lan5";
nvmem-cells = <&macaddr_dp6_syn>;
nvmem-cell-names = "mac-address";
};
&blsp1_uart5 {
status = "okay";
};
&blsp1_i2c2 {
status = "okay";
g761@3e {
compatible = "gmt,g763";
reg = <0x3e>;
clocks =<&sleep_clk>;
fan_gear_mode = <0>;
fan_start = <1>;
pwm_polarity = <0>;
};
};
&qpic_bam {
status = "okay";
};
&qpic_nand {
status = "okay";
nand@0 {
reg = <0>;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
nand-bus-width = <8>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:sbl1";
reg = <0x00 0x100000>;
read-only;
};
partition@100000 {
label = "0:mibib";
reg = <0x100000 0x100000>;
read-only;
};
partition@200000 {
label = "0:bootconfig";
reg = <0x200000 0x80000>;
read-only;
};
partition@280000 {
label = "0:bootconfig_1";
reg = <0x280000 0x80000>;
read-only;
};
partition@300000 {
label = "0:qsee";
reg = <0x300000 0x300000>;
read-only;
};
partition@600000 {
label = "0:qsee_1";
reg = <0x600000 0x300000>;
read-only;
};
partition@900000 {
label = "0:devcfg";
reg = <0x900000 0x80000>;
read-only;
};
partition@980000 {
label = "0:devcfg_1";
reg = <0x980000 0x80000>;
read-only;
};
partition@a00000 {
label = "0:apdp";
reg = <0xa00000 0x80000>;
read-only;
};
partition@a80000 {
label = "0:apdp_1";
reg = <0xa80000 0x80000>;
read-only;
};
partition@b00000 {
label = "0:rpm";
reg = <0xb00000 0x80000>;
read-only;
};
partition@b80000 {
label = "0:rpm_1";
reg = <0xb80000 0x80000>;
read-only;
};
partition@c00000 {
label = "0:cdt";
reg = <0xc00000 0x80000>;
read-only;
};
partition@c80000 {
label = "0:cdt_1";
reg = <0xc80000 0x80000>;
read-only;
};
partition@d00000 {
label = "0:appsblenv";
reg = <0xd00000 0x80000>;
};
partition@d80000 {
label = "0:appsbl";
reg = <0xd80000 0x100000>;
read-only;
};
partition@e80000 {
label = "0:appsbl_1";
reg = <0xe80000 0x100000>;
read-only;
};
partition@f80000 {
label = "0:art";
reg = <0xf80000 0x80000>;
read-only;
};
partition@1000000 {
label = "0:art.bak";
reg = <0x1000000 0x0080000>;
read-only;
};
partition@1080000 {
label = "config";
reg = <0x1080000 0x0100000>;
read-only;
};
partition@1180000 {
label = "boarddata1";
reg = <0x1180000 0x0100000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_dp1: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_dp2: macaddr@1 {
reg = <0x6 0x6>;
};
macaddr_dp3: macaddr@2 {
reg = <0xc 0x6>;
};
macaddr_dp4: macaddr@3 {
reg = <0x12 0x6>;
};
macaddr_dp5: macaddr@4 {
reg = <0x18 0x6>;
};
macaddr_dp6_syn: macaddr@5 {
reg = <0x1e 0x6>;
};
};
partition@1280000 {
label = "boarddata2";
reg = <0x1280000 0x0100000>;
read-only;
};
partition@1380000 {
label = "pot";
reg = <0x1380000 0x0100000>;
read-only;
};
partition@1480000 {
label = "dnidata";
reg = <0x1480000 0x0500000>;
read-only;
};
partition@1980000 {
label = "kernel";
reg = <0x1980000 0x1d00000>;
};
partition@7e00000 {
label = "ethphyfw";
reg = <0x7e00000 0x80000>;
};
partition@e8800000 {
label = "rootfs";
reg = <0xe880000 0x11780000>;
};
};
};
};
&qusb_phy_0 {
status = "okay";
};
&qusb_phy_1 {
status = "okay";
};
&ssphy_0 {
status = "okay";
};
&ssphy_1 {
status = "okay";
};
&usb_0 {
status = "okay";
};
&usb_1 {
status = "okay";
};
&wifi{
status = "okay";
qcom,ath11k-calibration-variant = "Netgear-RAX120v2";
};
&cryptobam {
status = "okay";
};
&crypto {
status = "okay";
};
&prng {
status = "okay";
};

24
target/linux/qualcommax/image/ipq807x.mk
View file

@ -91,6 +91,30 @@ define Device/edimax_cax1800
endef
TARGET_DEVICES += edimax_cax1800
define Device/netgear_rax120v2
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Netgear
DEVICE_MODEL := RAX120v2
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@hk01
SOC := ipq8074
KERNEL_SIZE := 29696k
NETGEAR_BOARD_ID := RAX120
NETGEAR_HW_ID := 29765589+0+512+1024+4x4+8x8
DEVICE_PACKAGES := ipq-wifi-netgear_rax120v2 kmod-spi-gpio \
kmod-spi-bitbang kmod-gpio-nxp-74hc164 kmod-hwmon-g761
IMAGES = web-ui-factory.img sysupgrade.bin
IMAGE/web-ui-factory.img := append-image initramfs-uImage.itb | \
pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | \
netgear-dni
IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | \
append-metadata
endef
TARGET_DEVICES += netgear_rax120v2
define Device/netgear_wax218
$(call Device/FitImage)
$(call Device/UbiFit)

3
target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
View file

@ -9,6 +9,9 @@ case "$board" in
edgecore,eap102)
ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "wan"
;;
netgear,rax120v2)
ucidef_set_led_netdev "aqr" "AQR" "white:aqr" "lan5"
;;
netgear,wax218)
ucidef_set_led_netdev "lan" "LAN" "blue:lan" "lan"
ucidef_set_led_wlan "wlan5g" "WIFI 5GHz" "blue:wlan5g" "phy0radio"

3
target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network
View file

@ -22,6 +22,9 @@ ipq807x_setup_interfaces()
edimax,cax1800)
ucidef_set_interfaces_lan_wan "lan"
;;
netgear,rax120v2)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" "wan"
;;
netgear,wax218)
ucidef_set_interface_lan "lan" "dhcp"
;;

1
target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
View file

@ -14,6 +14,7 @@ case "$FIRMWARE" in
edgecore,eap102|\
edimax,cax1800|\
dynalink,dl-wrx36|\
netgear,rax120v2|\
netgear,wax218|\
qnap,301w|\
redmi,ax6|\

1
target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh
View file

@ -68,6 +68,7 @@ platform_do_upgrade() {
;;
compex,wpq873|\
edimax,cax1800|\
netgear,rax120v2|\
netgear,wax218)
nand_do_upgrade "$1"
;;