diff --git a/target/linux/realtek/files-6.6/drivers/net/phy/rtl83xx-phy.c b/target/linux/realtek/files-6.6/drivers/net/phy/rtl83xx-phy.c
index 94ccbe57692..ffea7421943 100644
--- a/target/linux/realtek/files-6.6/drivers/net/phy/rtl83xx-phy.c
+++ b/target/linux/realtek/files-6.6/drivers/net/phy/rtl83xx-phy.c
@@ -1124,6 +1124,52 @@ static int rtl8214fc_get_port(struct phy_device *phydev)
 	return PORT_MII;
 }
 
+static int rtl8214fc_get_features(struct phy_device *phydev)
+{
+	int ret = 0;
+
+	ret = genphy_read_abilities(phydev);
+	if (ret)
+		return ret;
+	/*
+	 * The RTL8214FC only advertises TP capabilities in the standard registers. This is
+	 * independent from what fibre/copper combination is currently activated. For now just
+	 * announce the superset of all possible features.
+	 */
+	linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, phydev->supported);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported);
+
+	return 0;
+}
+
+static int rtl8214fc_read_status(struct phy_device *phydev)
+{
+	bool changed;
+	int ret;
+
+	if (rtl8214fc_media_is_fibre(phydev)) {
+		phydev->port = PORT_FIBRE;
+		ret = genphy_c37_read_status(phydev, &changed);
+	} else {
+		phydev->port = PORT_MII; /* for now aligend with rest of code */
+		ret = genphy_read_status(phydev);
+	}
+
+	return ret;
+}
+
+static int rtl8214fc_config_aneg(struct phy_device *phydev)
+{
+	int ret;
+
+	if (rtl8214fc_media_is_fibre(phydev))
+		ret = genphy_c37_config_aneg(phydev);
+	else
+		ret = genphy_config_aneg(phydev);
+
+	return ret;
+}
+
 /* Enable EEE on the RTL8218B PHYs
  * The method used is not the preferred way (which would be based on the MAC-EEE state,
  * but the only way that works since the kernel first enables EEE in the MAC
@@ -3713,7 +3759,15 @@ int rtl931x_link_sts_get(u32 sds)
 
 static int rtl8214fc_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
 {
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
+	DECLARE_PHY_INTERFACE_MASK(interfaces);
 	struct phy_device *phydev = upstream;
+	phy_interface_t iface;
+
+	sfp_parse_support(phydev->sfp_bus, id, support, interfaces);
+	iface = sfp_select_interface(phydev->sfp_bus, support);
+
+	dev_info(&phydev->mdio.dev, "%s SFP module inserted\n", phy_modes(iface));
 
 	rtl8214fc_media_set(phydev, true);
 
@@ -3914,17 +3968,18 @@ static struct phy_driver rtl83xx_phy_driver[] = {
 	{
 		.match_phy_device = rtl8214fc_match_phy_device,
 		.name		= "Realtek RTL8214FC",
-		.features	= PHY_GBIT_FIBRE_FEATURES,
+		.config_aneg	= rtl8214fc_config_aneg,
+		.get_eee	= rtl8214fc_get_eee,
+		.get_features	= rtl8214fc_get_features,
+		.get_port	= rtl8214fc_get_port,
 		.probe		= rtl8214fc_phy_probe,
 		.read_page	= rtl821x_read_page,
-		.write_page	= rtl821x_write_page,
-		.suspend	= rtl8214fc_suspend,
+		.read_status    = rtl8214fc_read_status,
 		.resume		= rtl8214fc_resume,
-		.set_loopback	= genphy_loopback,
-		.set_port	= rtl8214fc_set_port,
-		.get_port	= rtl8214fc_get_port,
 		.set_eee	= rtl8214fc_set_eee,
-		.get_eee	= rtl8214fc_get_eee,
+		.set_port	= rtl8214fc_set_port,
+		.suspend	= rtl8214fc_suspend,
+		.write_page	= rtl821x_write_page,
 	},
 	{
 		.match_phy_device = rtl8218b_ext_match_phy_device,