ipq806x: add support for IgniteNet SunSpot AC Wave2
The IgniteNet SS-W2-AC2600 is an 802.11ac outdoor (IP-55) access point. FCC ID: HEDSSW2AC2600 Specification: - Qualcomm dual-core IPQ8068 @ 1.4 GHz - 256 MB of DDR3L RAM (2x Winbond W631GU6KB-12) - 16 MB of SPI NOR (Winbond W25Q128FW) - 128 MB of NAND (Macronix MX30UF1G18AC) - Qualcomm QCA9994 2.4GHz 802.11bgn - Qualcomm QCA9994 5GHz 802.11ac - 2 x 10/100/1000 Mbit/s Ethernet - 115200, 8N1 RS-232 console (unpopulated RJ-45) - Reset button - Power and WLAN LEDs - Powered via 802.3at PoE or 12V 2A barrel connector Tested-by: Elektra Wagenrad <onelektra@gmx.net> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This commit is contained in:
Daniel Golle
parent
72b895b631
commit
3fb1605931
6 changed files with 333 additions and 2 deletions
|
|
@ -46,6 +46,10 @@ fortinet,fap-421e)
|
|||
ucidef_set_led_wlan "wlan5g" "5G" "yellow:5g" "phy0tpt"
|
||||
ucidef_set_led_usbport "usb" "USB" "amber:power" "usb1-port1" "usb2-port1"
|
||||
;;
|
||||
ignitenet,ss-w2-ac2600)
|
||||
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy1tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy0tpt"
|
||||
;;
|
||||
linksys,e8350-v1)
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "green:wifi" "phy0tpt"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -58,6 +58,7 @@ ipq806x_setup_interfaces()
|
|||
ucidef_set_interface_lan "eth1 eth2 eth3 lan1 lan2 lan3 lan4" "wan"
|
||||
;;
|
||||
fortinet,fap-421e |\
|
||||
ignitenet,ss-w2-ac2600 |\
|
||||
ubnt,unifi-ac-hd)
|
||||
ucidef_set_interface_lan "eth0 eth1"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -9,7 +9,8 @@ boot() {
|
|||
asrock,g10)
|
||||
asrock_bootconfig_mangle "bootcheck" && reboot
|
||||
;;
|
||||
edgecore,ecw5410)
|
||||
edgecore,ecw5410 |\
|
||||
ignitenet,ss-w2-ac2600)
|
||||
fw_setenv bootcount 0
|
||||
;;
|
||||
extreme,ap3935)
|
||||
|
|
|
|||
|
|
@ -35,7 +35,8 @@ platform_do_upgrade() {
|
|||
CI_ROOTPART="ubi_rootfs"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
edgecore,ecw5410)
|
||||
edgecore,ecw5410 |\
|
||||
ignitenet,ss-w2-ac2600)
|
||||
part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
|
||||
if [ "$part" = "rootfs1" ]; then
|
||||
fw_setenv active 2 || exit 1
|
||||
|
|
|
|||
|
|
@ -0,0 +1,309 @@
|
|||
#include "qcom-ipq8064-v2.0-smb208.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/soc/qcom,tcsr.h>
|
||||
|
||||
/ {
|
||||
model = "IgniteNet SunSpot AC Wave2";
|
||||
compatible = "ignitenet,ss-w2-ac2600", "qcom,ipq8068";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac2;
|
||||
ethernet1 = &gmac3;
|
||||
|
||||
led-boot = &led_power_red;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_red;
|
||||
led-upgrade = &led_power_red;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs-append = " console=ttyMSM0,115200n8 root=/dev/ubiblock0_1";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
nss@40000000 {
|
||||
reg = <0x40000000 0x1000000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
smem: smem@41000000 {
|
||||
reg = <0x41000000 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
wifi_dump@44000000 {
|
||||
reg = <0x44000000 0x600000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
cpus {
|
||||
idle-states {
|
||||
CPU_SPC: spc {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wlan2g_green {
|
||||
label = "green:wlan2g";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan2g_yellow {
|
||||
label = "yellow:wlan2g";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan5g_green {
|
||||
label = "green:wlan5g";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_red: power_red {
|
||||
function = LED_FUNCTION_POWER;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan5g_yellow {
|
||||
label = "yellow:wlan5g";
|
||||
gpios = <&qcom_pinmux 59 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19";
|
||||
function = "gsbi5";
|
||||
drive-strength = <10>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio21";
|
||||
function = "gsbi5";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
function = "gpio";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio16", "gpio23", "gpio24", "gpio26",
|
||||
"gpio28", "gpio59";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio25";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi5 {
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
status = "okay";
|
||||
|
||||
spi4: spi@1a280000 {
|
||||
status = "okay";
|
||||
spi-max-frequency = <50000000>;
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
w25q128@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
|
||||
partitions {
|
||||
compatible = "qcom,smem-part";
|
||||
|
||||
art: partition-0-art {
|
||||
label = "0:art";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&art {
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_art_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_art_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
|
||||
precal_art_1000: precal@1000 {
|
||||
reg = <0x1000 0x2f20>;
|
||||
};
|
||||
|
||||
precal_art_5000: precal@5000 {
|
||||
reg = <0x5000 0x2f20>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "qcom,ath10k";
|
||||
status = "okay";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
qcom,ath10k-calibration-variant = "IgniteNet-SS-W2-AC2600";
|
||||
nvmem-cells = <&precal_art_1000>;
|
||||
nvmem-cell-names = "pre-calibration";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2 {
|
||||
status = "okay";
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "qcom,ath10k";
|
||||
status = "okay";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
qcom,ath10k-calibration-variant = "IgniteNet-SS-W2-AC2600";
|
||||
nvmem-cells = <&precal_art_5000>;
|
||||
nvmem-cell-names = "pre-calibration";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
reg = <0>;
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
rootfs1@0 {
|
||||
label = "rootfs1";
|
||||
reg = <0x0000000 0x4000000>;
|
||||
};
|
||||
|
||||
rootfs2@4000000 {
|
||||
label = "rootfs2";
|
||||
reg = <0x4000000 0x4000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
|
||||
qcom,id = <2>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&phy1>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&gmac3 {
|
||||
status = "okay";
|
||||
|
||||
qcom,id = <3>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&phy0>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -201,6 +201,21 @@ define Device/fortinet_fap-421e
|
|||
endef
|
||||
TARGET_DEVICES += fortinet_fap-421e
|
||||
|
||||
define Device/ignitenet_ss-w2-ac2600
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := IgniteNet
|
||||
DEVICE_MODEL := SunSpot AC Wave2
|
||||
DEVICE_ALT0_VENDOR := Accton Technology Corporation
|
||||
DEVICE_ALT0_MODEL := EAP1024A
|
||||
DEVICE_ALT0_VARIANT := V2
|
||||
SOC := qcom-ipq8068
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-ignitenet_ss-w2-ac2600
|
||||
endef
|
||||
TARGET_DEVICES += ignitenet_ss-w2-ac2600
|
||||
|
||||
define Device/linksys_e8350-v1
|
||||
$(call Device/LegacyImage)
|
||||
DEVICE_VENDOR := Linksys
|
||||
|
|
|
|||
Loading…
Reference in a new issue