diff --git a/target/linux/realtek/base-files/etc/board.d/02_network b/target/linux/realtek/base-files/etc/board.d/02_network
index 839dcd85f21..d3b1f7cd47f 100644
--- a/target/linux/realtek/base-files/etc/board.d/02_network
+++ b/target/linux/realtek/base-files/etc/board.d/02_network
@@ -54,6 +54,10 @@ tplink,t1600g-28ts-v3)
 	label_mac=$(get_mac_label)
 	lan_mac="$label_mac"
 	;;
+tplink,tl-st1008f,v2)
+	lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+	[ -z "$lan_mac" ] || [ "$lan_mac" = "00:e0:4c:00:00:00" ] && lan_mac=$(macaddr_random)
+	;;
 xikestor,sks8300-8x)
 	lan_mac=$(mtd_get_mac_binary board-info 0x1f1)
 	;;
diff --git a/target/linux/realtek/base-files/etc/uci-defaults/99_fwenv-store-ethaddr b/target/linux/realtek/base-files/etc/uci-defaults/99_fwenv-store-ethaddr
new file mode 100644
index 00000000000..adb54da9566
--- /dev/null
+++ b/target/linux/realtek/base-files/etc/uci-defaults/99_fwenv-store-ethaddr
@@ -0,0 +1,29 @@
+[ ! -e /etc/fw_env.config ] && exit 0
+
+BOARD_CFG=/etc/board.json
+[ ! -e "$BOARD_CFG" ] && exit 0
+
+. /lib/functions/system.sh
+. /lib/upgrade/common.sh
+. /usr/share/libubox/jshn.sh
+
+[ "$(rootfs_type)" = "tmpfs" ] && exit 0
+
+case "$(board_name)" in
+tplink,tl-st1008f,v2)
+	env_ethaddr=$(macaddr_canonicalize "$(fw_printenv -n ethaddr 2>/dev/null)")
+
+	# This device ships with a dummy ethaddr because it's an unmanaged switch.
+	# If it hasn't been updated to another one yet, do that now.
+	if [ -z "$env_ethaddr" ] || [ "$env_ethaddr" = "00:e0:4c:00:00:00" ]; then
+		json_init
+		json_load_file "$BOARD_CFG"
+		json_select network_device
+		json_select eth0
+		json_get_var board_ethaddr macaddr
+		[ -n "$board_ethaddr" ] && fw_setenv ethaddr "$board_ethaddr"
+	fi
+	;;
+esac
+
+exit 0
diff --git a/target/linux/realtek/dts/rtl9303_tplink_tl-st1008f_v2.dts b/target/linux/realtek/dts/rtl9303_tplink_tl-st1008f_v2.dts
new file mode 100644
index 00000000000..20850676f2c
--- /dev/null
+++ b/target/linux/realtek/dts/rtl9303_tplink_tl-st1008f_v2.dts
@@ -0,0 +1,446 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "rtl930x.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "tplink,tl-st1008f,v2", "realtek,rtl930x-soc";
+	model = "TP-Link TL-ST1008F v2.0";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>, /* first 256 MiB */
+		      <0x20000000 0x10000000>; /* remaining 256 MiB */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		m1 {
+			label = "M1";
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			debounce-interval = <50>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+
+		m2 {
+			label = "M2";
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+			debounce-interval = <50>;
+			linux,code = <BTN_1>;
+			linux,input-type = <EV_SW>;
+		};
+
+		m3 {
+			label = "M3";
+			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+			debounce-interval = <50>;
+			linux,code = <BTN_2>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	led_set {
+		compatible = "realtek,rtl9300-leds";
+		active-high;
+
+		led_set0 = <0x0ba0 0x0a08 0x0a01>;
+	};
+
+	i2c_gpio {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-gpio,delay-us = <2>;
+		scl-gpios = <&gpio0 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio0 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		gpioexp0: i2c@38 {
+			reg = <0x38>;
+			compatible = "nxp,pca9534";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	i2c_main: i2c@1b00036c {
+		compatible = "realtek,rtl9300-i2c";
+		reg = <0x1b00036c 0x3c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		scl-pin = <8>;
+		sda-pin = <9>;
+		clock-frequency = <100000>;
+	};
+
+	i2c-mux {
+		compatible = "realtek,i2c-mux-rtl9300";
+		i2c-parent = <&i2c_main>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c0: i2c@0 {
+			reg = <0>;
+			scl-pin = <8>;
+			sda-pin = <9>;
+		};
+
+		i2c1: i2c@1 {
+			reg = <1>;
+			scl-pin = <8>;
+			sda-pin = <10>;
+		};
+
+		i2c2: i2c@2 {
+			reg = <2>;
+			scl-pin = <8>;
+			sda-pin = <11>;
+		};
+
+		i2c3: i2c@3 {
+			reg = <3>;
+			scl-pin = <8>;
+			sda-pin = <12>;
+		};
+
+		i2c4: i2c@4 {
+			reg = <4>;
+			scl-pin = <8>;
+			sda-pin = <13>;
+		};
+
+		i2c5: i2c@5 {
+			reg = <5>;
+			scl-pin = <8>;
+			sda-pin = <14>;
+		};
+
+		i2c6: i2c@6 {
+			reg = <6>;
+			scl-pin = <8>;
+			sda-pin = <15>;
+		};
+
+		i2c7: i2c@7 {
+			reg = <7>;
+			scl-pin = <8>;
+			sda-pin = <16>;
+		};
+	};
+
+	sfp0: sfp-p1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c0>;
+		mod-def0-gpio = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpioexp0 0 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2900>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	sfp1: sfp-p2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		mod-def0-gpio = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpioexp0 1 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <1500>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	sfp2: sfp-p3 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c2>;
+		mod-def0-gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpioexp0 2 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <1500>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	sfp3: sfp-p4 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c3>;
+		mod-def0-gpio = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpioexp0 3 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	sfp4: sfp-p5 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c4>;
+		mod-def0-gpio = <&gpio0 4 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpioexp0 4 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	sfp5: sfp-p6 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c5>;
+		mod-def0-gpio = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpioexp0 5 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <1500>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	sfp6: sfp-p7 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c6>;
+		mod-def0-gpio = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpioexp0 6 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <1500>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	sfp7: sfp-p8 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c7>;
+		mod-def0-gpio = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpioexp0 7 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2900>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	watchdog {
+		compatible = "linux,wdt-gpio";
+		gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		hw_algo = "toggle";
+		hw_margin_ms = <1200>;
+		always-running;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0xe0000>;
+				read-only;
+			};
+
+			partition@e0000 {
+				label = "u-boot-env";
+				reg = <0xe0000 0x10000>;
+			};
+
+			partition@f0000 {
+				label = "u-boot-env2";
+				reg = <0xf0000 0x10000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "jffs2-cfg";
+				reg = <0x100000 0x100000>;
+			};
+
+			partition@200000 {
+				label = "jffs2-log";
+				reg = <0x200000 0x100000>;
+			};
+
+			partition@300000 {
+				compatible = "openwrt,uimage", "denx,uimage";
+				reg = <0x300000 0x1d00000>;
+				label = "firmware";
+				openwrt,ih-magic = <0x93030000>;
+			};
+		};
+	};
+};
+
+&ethernet0 {
+	mdio: mdio-bus {
+		compatible = "realtek,rtl838x-mdio";
+		regmap = <&ethernet0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			phy-is-integrated;
+			reg = <0>;
+			sds = <2>;
+		};
+
+		phy8: ethernet-phy@8 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			phy-is-integrated;
+			reg = <8>;
+			sds = <3>;
+		};
+
+		phy16: ethernet-phy@10 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			phy-is-integrated;
+			reg = <16>;
+			sds = <4>;
+		};
+
+		phy20: ethernet-phy@14 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			phy-is-integrated;
+			reg = <20>;
+			sds = <5>;
+		};
+
+		phy24: ethernet-phy@18 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			phy-is-integrated;
+			reg = <24>;
+			sds = <6>;
+		};
+
+		phy25: ethernet-phy@19 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			phy-is-integrated;
+			reg = <25>;
+			sds = <7>;
+		};
+
+		phy26: ethernet-phy@1a {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			phy-is-integrated;
+			reg = <26>;
+			sds = <8>;
+		};
+
+		phy27: ethernet-phy@1b {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			phy-is-integrated;
+			reg = <27>;
+			sds = <9>;
+		};
+	};
+};
+
+&switch0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+			phy-mode = "10gbase-r";
+			pseudo-phy-handle = <&phy0>;
+			sfp = <&sfp0>;
+			managed = "in-band-status";
+			led-set = <0>;
+		};
+
+		port@8 {
+			reg = <8>;
+			label = "lan2";
+			phy-mode = "10gbase-r";
+			pseudo-phy-handle = <&phy8>;
+			sfp = <&sfp1>;
+			managed = "in-band-status";
+			led-set = <0>;
+		};
+
+		port@10 {
+			reg = <16>;
+			label = "lan3";
+			phy-mode = "10gbase-r";
+			pseudo-phy-handle = <&phy16>;
+			sfp = <&sfp2>;
+			managed = "in-band-status";
+			led-set = <0>;
+		};
+
+		port@14 {
+			reg = <20>;
+			label = "lan4";
+			phy-mode = "10gbase-r";
+			pseudo-phy-handle = <&phy20>;
+			sfp = <&sfp3>;
+			managed = "in-band-status";
+			led-set = <0>;
+		};
+
+		port@18 {
+			reg = <24>;
+			label = "lan5";
+			phy-mode = "10gbase-r";
+			pseudo-phy-handle = <&phy24>;
+			sfp = <&sfp4>;
+			managed = "in-band-status";
+			led-set = <0>;
+		};
+
+		port@19 {
+			reg = <25>;
+			label = "lan6";
+			phy-mode = "10gbase-r";
+			pseudo-phy-handle = <&phy25>;
+			sfp = <&sfp5>;
+			managed = "in-band-status";
+			led-set = <0>;
+		};
+
+		port@1a {
+			reg = <26>;
+			label = "lan7";
+			phy-mode = "10gbase-r";
+			pseudo-phy-handle = <&phy26>;
+			sfp = <&sfp6>;
+			managed = "in-band-status";
+			led-set = <0>;
+		};
+
+		port@1b {
+			reg = <27>;
+			label = "lan8";
+			phy-mode = "10gbase-r";
+			pseudo-phy-handle = <&phy27>;
+			sfp = <&sfp7>;
+			managed = "in-band-status";
+			led-set = <0>;
+		};
+
+		port@1c {
+			ethernet = <&ethernet0>;
+			reg = <28>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <10000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&thermal_zones {
+	sfp-thermal {
+		polling-delay-passive = <10000>;
+		polling-delay = <10000>;
+		thermal-sensors = <&sfp0>, <&sfp1>, <&sfp2>, <&sfp3>, <&sfp4>, <&sfp5>, <&sfp6>, <&sfp7>;
+		trips {
+			sfp-crit {
+				temperature = <110000>;
+				hysteresis = <1000>;
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/target/linux/realtek/image/rtl930x.mk b/target/linux/realtek/image/rtl930x.mk
index 50c72494355..1119cd3f2c2 100644
--- a/target/linux/realtek/image/rtl930x.mk
+++ b/target/linux/realtek/image/rtl930x.mk
@@ -5,6 +5,17 @@ define Build/xikestor-nosimg
   mv $@.new $@
 endef
 
+define Device/tplink_tl-st1008f_v2
+  SOC := rtl9303
+  UIMAGE_MAGIC := 0x93030000
+  DEVICE_VENDOR := TP-Link
+  DEVICE_MODEL := TL-ST1008F
+  DEVICE_VARIANT := v2.0
+  DEVICE_PACKAGES := kmod-gpio-pca953x
+  IMAGE_SIZE := 31808k
+endef
+TARGET_DEVICES += tplink_tl-st1008f_v2
+
 define Device/xikestor_sks8300-8x
   SOC := rtl9303
   DEVICE_VENDOR := XikeStor