Difuse/difos
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

ipq806x: 5:15: drop upstream patch

Browse source 
- Drop stmmac upstream patches
- Drop tsens patches
- Drop ADM driver
- Drop SMEM parser

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
This commit is contained in:
Ansuel Smith 2022-01-11 12:41:35 +01:00 committed by Daniel Golle
parent 4c5d5c66ca
commit 327677a71d
14 changed files with 0 additions and 2244 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

965
target/linux/ipq806x/patches-5.15/100-v5.11-dmaengine-qcom-add_ADM_driver.patch
View file

@ -1,965 +0,0 @@
From 5c9f8c2dbdbe53818bcde6aa6695e1331e5f841f Mon Sep 17 00:00:00 2001
From: Jonathan McDowell <noodles@earth.li>
Date: Sat, 14 Nov 2020 14:02:33 +0000
Subject: dmaengine: qcom: Add ADM driver
Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
controller found in the MSM8x60 and IPQ/APQ8064 platforms.
The ADM supports both memory to memory transactions and memory
to/from peripheral device transactions. The controller also provides
flow control capabilities for transactions to/from peripheral devices.
The initial release of this driver supports slave transfers to/from
peripherals and also incorporates CRCI (client rate control interface)
flow control.
The hardware only supports a 32 bit physical address, so specifying
!PHYS_ADDR_T_64BIT gives maximum COMPILE_TEST coverage without having to
spend effort on kludging things in the code that will never actually be
needed on real hardware.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Link: https://lore.kernel.org/r/20201114140233.GM32650@earth.li
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/dma/qcom/Kconfig | 11 +
drivers/dma/qcom/Makefile | 1 +
drivers/dma/qcom/qcom_adm.c | 903 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 915 insertions(+)
create mode 100644 drivers/dma/qcom/qcom_adm.c
--- a/drivers/dma/qcom/Kconfig
+++ b/drivers/dma/qcom/Kconfig
@@ -1,4 +1,15 @@
# SPDX-License-Identifier: GPL-2.0-only
+config QCOM_ADM
+ tristate "Qualcomm ADM support"
+ depends on (ARCH_QCOM || COMPILE_TEST) && !PHYS_ADDR_T_64BIT
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+ help
+ Enable support for the Qualcomm Application Data Mover (ADM) DMA
+ controller, as present on MSM8x60, APQ8064, and IPQ8064 devices.
+ This controller provides DMA capabilities for both general purpose
+ and on-chip peripheral devices.
+
config QCOM_BAM_DMA
tristate "QCOM BAM DMA support"
depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
--- a/drivers/dma/qcom/Makefile
+++ b/drivers/dma/qcom/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_QCOM_ADM) += qcom_adm.o
obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mgmt.o
hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o
--- /dev/null
+++ b/drivers/dma/qcom/qcom_adm.c
@@ -0,0 +1,903 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_dma.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+
+#include "../dmaengine.h"
+#include "../virt-dma.h"
+
+/* ADM registers - calculated from channel number and security domain */
+#define ADM_CHAN_MULTI 0x4
+#define ADM_CI_MULTI 0x4
+#define ADM_CRCI_MULTI 0x4
+#define ADM_EE_MULTI 0x800
+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * (chan))
+#define ADM_EE_OFFS(ee) (ADM_EE_MULTI * (ee))
+#define ADM_CHAN_EE_OFFS(chan, ee) (ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee))
+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * (chan))
+#define ADM_CI_OFFS(ci) (ADM_CHAN_OFF(ci))
+#define ADM_CH_CMD_PTR(chan, ee) (ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_RSLT(chan, ee) (0x40 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_FLUSH_STATE0(chan, ee) (0x80 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_STATUS_SD(chan, ee) (0x200 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_CONF(chan) (0x240 + ADM_CHAN_OFFS(chan))
+#define ADM_CH_RSLT_CONF(chan, ee) (0x300 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_SEC_DOMAIN_IRQ_STATUS(ee) (0x380 + ADM_EE_OFFS(ee))
+#define ADM_CI_CONF(ci) (0x390 + (ci) * ADM_CI_MULTI)
+#define ADM_GP_CTL 0x3d8
+#define ADM_CRCI_CTL(crci, ee) (0x400 + (crci) * ADM_CRCI_MULTI + \
+ ADM_EE_OFFS(ee))
+
+/* channel status */
+#define ADM_CH_STATUS_VALID BIT(1)
+
+/* channel result */
+#define ADM_CH_RSLT_VALID BIT(31)
+#define ADM_CH_RSLT_ERR BIT(3)
+#define ADM_CH_RSLT_FLUSH BIT(2)
+#define ADM_CH_RSLT_TPD BIT(1)
+
+/* channel conf */
+#define ADM_CH_CONF_SHADOW_EN BIT(12)
+#define ADM_CH_CONF_MPU_DISABLE BIT(11)
+#define ADM_CH_CONF_PERM_MPU_CONF BIT(9)
+#define ADM_CH_CONF_FORCE_RSLT_EN BIT(7)
+#define ADM_CH_CONF_SEC_DOMAIN(ee) ((((ee) & 0x3) << 4) | (((ee) & 0x4) << 11))
+
+/* channel result conf */
+#define ADM_CH_RSLT_CONF_FLUSH_EN BIT(1)
+#define ADM_CH_RSLT_CONF_IRQ_EN BIT(0)
+
+/* CRCI CTL */
+#define ADM_CRCI_CTL_MUX_SEL BIT(18)
+#define ADM_CRCI_CTL_RST BIT(17)
+
+/* CI configuration */
+#define ADM_CI_RANGE_END(x) ((x) << 24)
+#define ADM_CI_RANGE_START(x) ((x) << 16)
+#define ADM_CI_BURST_4_WORDS BIT(2)
+#define ADM_CI_BURST_8_WORDS BIT(3)
+
+/* GP CTL */
+#define ADM_GP_CTL_LP_EN BIT(12)
+#define ADM_GP_CTL_LP_CNT(x) ((x) << 8)
+
+/* Command pointer list entry */
+#define ADM_CPLE_LP BIT(31)
+#define ADM_CPLE_CMD_PTR_LIST BIT(29)
+
+/* Command list entry */
+#define ADM_CMD_LC BIT(31)
+#define ADM_CMD_DST_CRCI(n) (((n) & 0xf) << 7)
+#define ADM_CMD_SRC_CRCI(n) (((n) & 0xf) << 3)
+
+#define ADM_CMD_TYPE_SINGLE 0x0
+#define ADM_CMD_TYPE_BOX 0x3
+
+#define ADM_CRCI_MUX_SEL BIT(4)
+#define ADM_DESC_ALIGN 8
+#define ADM_MAX_XFER (SZ_64K - 1)
+#define ADM_MAX_ROWS (SZ_64K - 1)
+#define ADM_MAX_CHANNELS 16
+
+struct adm_desc_hw_box {
+ u32 cmd;
+ u32 src_addr;
+ u32 dst_addr;
+ u32 row_len;
+ u32 num_rows;
+ u32 row_offset;
+};
+
+struct adm_desc_hw_single {
+ u32 cmd;
+ u32 src_addr;
+ u32 dst_addr;
+ u32 len;
+};
+
+struct adm_async_desc {
+ struct virt_dma_desc vd;
+ struct adm_device *adev;
+
+ size_t length;
+ enum dma_transfer_direction dir;
+ dma_addr_t dma_addr;
+ size_t dma_len;
+
+ void *cpl;
+ dma_addr_t cp_addr;
+ u32 crci;
+ u32 mux;
+ u32 blk_size;
+};
+
+struct adm_chan {
+ struct virt_dma_chan vc;
+ struct adm_device *adev;
+
+ /* parsed from DT */
+ u32 id; /* channel id */
+
+ struct adm_async_desc *curr_txd;
+ struct dma_slave_config slave;
+ struct list_head node;
+
+ int error;
+ int initialized;
+};
+
+static inline struct adm_chan *to_adm_chan(struct dma_chan *common)
+{
+ return container_of(common, struct adm_chan, vc.chan);
+}
+
+struct adm_device {
+ void __iomem *regs;
+ struct device *dev;
+ struct dma_device common;
+ struct device_dma_parameters dma_parms;
+ struct adm_chan *channels;
+
+ u32 ee;
+
+ struct clk *core_clk;
+ struct clk *iface_clk;
+
+ struct reset_control *clk_reset;
+ struct reset_control *c0_reset;
+ struct reset_control *c1_reset;
+ struct reset_control *c2_reset;
+ int irq;
+};
+
+/**
+ * adm_free_chan - Frees dma resources associated with the specific channel
+ *
+ * Free all allocated descriptors associated with this channel
+ *
+ */
+static void adm_free_chan(struct dma_chan *chan)
+{
+ /* free all queued descriptors */
+ vchan_free_chan_resources(to_virt_chan(chan));
+}
+
+/**
+ * adm_get_blksize - Get block size from burst value
+ *
+ */
+static int adm_get_blksize(unsigned int burst)
+{
+ int ret;
+
+ switch (burst) {
+ case 16:
+ case 32:
+ case 64:
+ case 128:
+ ret = ffs(burst >> 4) - 1;
+ break;
+ case 192:
+ ret = 4;
+ break;
+ case 256:
+ ret = 5;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+/**
+ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers
+ *
+ * @achan: ADM channel
+ * @desc: Descriptor memory pointer
+ * @sg: Scatterlist entry
+ * @crci: CRCI value
+ * @burst: Burst size of transaction
+ * @direction: DMA transfer direction
+ */
+static void *adm_process_fc_descriptors(struct adm_chan *achan, void *desc,
+ struct scatterlist *sg, u32 crci,
+ u32 burst,
+ enum dma_transfer_direction direction)
+{
+ struct adm_desc_hw_box *box_desc = NULL;
+ struct adm_desc_hw_single *single_desc;
+ u32 remainder = sg_dma_len(sg);
+ u32 rows, row_offset, crci_cmd;
+ u32 mem_addr = sg_dma_address(sg);
+ u32 *incr_addr = &mem_addr;
+ u32 *src, *dst;
+
+ if (direction == DMA_DEV_TO_MEM) {
+ crci_cmd = ADM_CMD_SRC_CRCI(crci);
+ row_offset = burst;
+ src = &achan->slave.src_addr;
+ dst = &mem_addr;
+ } else {
+ crci_cmd = ADM_CMD_DST_CRCI(crci);
+ row_offset = burst << 16;
+ src = &mem_addr;
+ dst = &achan->slave.dst_addr;
+ }
+
+ while (remainder >= burst) {
+ box_desc = desc;
+ box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd;
+ box_desc->row_offset = row_offset;
+ box_desc->src_addr = *src;
+ box_desc->dst_addr = *dst;
+
+ rows = remainder / burst;
+ rows = min_t(u32, rows, ADM_MAX_ROWS);
+ box_desc->num_rows = rows << 16 | rows;
+ box_desc->row_len = burst << 16 | burst;
+
+ *incr_addr += burst * rows;
+ remainder -= burst * rows;
+ desc += sizeof(*box_desc);
+ }
+
+ /* if leftover bytes, do one single descriptor */
+ if (remainder) {
+ single_desc = desc;
+ single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd;
+ single_desc->len = remainder;
+ single_desc->src_addr = *src;
+ single_desc->dst_addr = *dst;
+ desc += sizeof(*single_desc);
+
+ if (sg_is_last(sg))
+ single_desc->cmd |= ADM_CMD_LC;
+ } else {
+ if (box_desc && sg_is_last(sg))
+ box_desc->cmd |= ADM_CMD_LC;
+ }
+
+ return desc;
+}
+
+/**
+ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers
+ *
+ * @achan: ADM channel
+ * @desc: Descriptor memory pointer
+ * @sg: Scatterlist entry
+ * @direction: DMA transfer direction
+ */
+static void *adm_process_non_fc_descriptors(struct adm_chan *achan, void *desc,
+ struct scatterlist *sg,
+ enum dma_transfer_direction direction)
+{
+ struct adm_desc_hw_single *single_desc;
+ u32 remainder = sg_dma_len(sg);
+ u32 mem_addr = sg_dma_address(sg);
+ u32 *incr_addr = &mem_addr;
+ u32 *src, *dst;
+
+ if (direction == DMA_DEV_TO_MEM) {
+ src = &achan->slave.src_addr;
+ dst = &mem_addr;
+ } else {
+ src = &mem_addr;
+ dst = &achan->slave.dst_addr;
+ }
+
+ do {
+ single_desc = desc;
+ single_desc->cmd = ADM_CMD_TYPE_SINGLE;
+ single_desc->src_addr = *src;
+ single_desc->dst_addr = *dst;
+ single_desc->len = (remainder > ADM_MAX_XFER) ?
+ ADM_MAX_XFER : remainder;
+
+ remainder -= single_desc->len;
+ *incr_addr += single_desc->len;
+ desc += sizeof(*single_desc);
+ } while (remainder);
+
+ /* set last command if this is the end of the whole transaction */
+ if (sg_is_last(sg))
+ single_desc->cmd |= ADM_CMD_LC;
+
+ return desc;
+}
+
+/**
+ * adm_prep_slave_sg - Prep slave sg transaction
+ *
+ * @chan: dma channel
+ * @sgl: scatter gather list
+ * @sg_len: length of sg
+ * @direction: DMA transfer direction
+ * @flags: DMA flags
+ * @context: transfer context (unused)
+ */
+static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
+ struct scatterlist *sgl,
+ unsigned int sg_len,
+ enum dma_transfer_direction direction,
+ unsigned long flags,
+ void *context)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct adm_device *adev = achan->adev;
+ struct adm_async_desc *async_desc;
+ struct scatterlist *sg;
+ dma_addr_t cple_addr;
+ u32 i, burst;
+ u32 single_count = 0, box_count = 0, crci = 0;
+ void *desc;
+ u32 *cple;
+ int blk_size = 0;
+
+ if (!is_slave_direction(direction)) {
+ dev_err(adev->dev, "invalid dma direction\n");
+ return NULL;
+ }
+
+ /*
+ * get burst value from slave configuration
+ */
+ burst = (direction == DMA_MEM_TO_DEV) ?
+ achan->slave.dst_maxburst :
+ achan->slave.src_maxburst;
+
+ /* if using flow control, validate burst and crci values */
+ if (achan->slave.device_fc) {
+ blk_size = adm_get_blksize(burst);
+ if (blk_size < 0) {
+ dev_err(adev->dev, "invalid burst value: %d\n",
+ burst);
+ return ERR_PTR(-EINVAL);
+ }
+
+ crci = achan->slave.slave_id & 0xf;
+ if (!crci || achan->slave.slave_id > 0x1f) {
+ dev_err(adev->dev, "invalid crci value\n");
+ return ERR_PTR(-EINVAL);
+ }
+ }
+
+ /* iterate through sgs and compute allocation size of structures */
+ for_each_sg(sgl, sg, sg_len, i) {
+ if (achan->slave.device_fc) {
+ box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,
+ ADM_MAX_ROWS);
+ if (sg_dma_len(sg) % burst)
+ single_count++;
+ } else {
+ single_count += DIV_ROUND_UP(sg_dma_len(sg),
+ ADM_MAX_XFER);
+ }
+ }
+
+ async_desc = kzalloc(sizeof(*async_desc), GFP_NOWAIT);
+ if (!async_desc)
+ return ERR_PTR(-ENOMEM);
+
+ if (crci)
+ async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
+ ADM_CRCI_CTL_MUX_SEL : 0;
+ async_desc->crci = crci;
+ async_desc->blk_size = blk_size;
+ async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
+ box_count * sizeof(struct adm_desc_hw_box) +
+ sizeof(*cple) + 2 * ADM_DESC_ALIGN;
+
+ async_desc->cpl = kzalloc(async_desc->dma_len, GFP_NOWAIT);
+ if (!async_desc->cpl)
+ goto free;
+
+ async_desc->adev = adev;
+
+ /* both command list entry and descriptors must be 8 byte aligned */
+ cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN);
+ desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN);
+
+ for_each_sg(sgl, sg, sg_len, i) {
+ async_desc->length += sg_dma_len(sg);
+
+ if (achan->slave.device_fc)
+ desc = adm_process_fc_descriptors(achan, desc, sg, crci,
+ burst, direction);
+ else
+ desc = adm_process_non_fc_descriptors(achan, desc, sg,
+ direction);
+ }
+
+ async_desc->dma_addr = dma_map_single(adev->dev, async_desc->cpl,
+ async_desc->dma_len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(adev->dev, async_desc->dma_addr))
+ goto free;
+
+ cple_addr = async_desc->dma_addr + ((void *)cple - async_desc->cpl);
+
+ /* init cmd list */
+ dma_sync_single_for_cpu(adev->dev, cple_addr, sizeof(*cple),
+ DMA_TO_DEVICE);
+ *cple = ADM_CPLE_LP;
+ *cple |= (async_desc->dma_addr + ADM_DESC_ALIGN) >> 3;
+ dma_sync_single_for_device(adev->dev, cple_addr, sizeof(*cple),
+ DMA_TO_DEVICE);
+
+ return vchan_tx_prep(&achan->vc, &async_desc->vd, flags);
+
+free:
+ kfree(async_desc);
+ return ERR_PTR(-ENOMEM);
+}
+
+/**
+ * adm_terminate_all - terminate all transactions on a channel
+ * @achan: adm dma channel
+ *
+ * Dequeues and frees all transactions, aborts current transaction
+ * No callbacks are done
+ *
+ */
+static int adm_terminate_all(struct dma_chan *chan)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct adm_device *adev = achan->adev;
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+ vchan_get_all_descriptors(&achan->vc, &head);
+
+ /* send flush command to terminate current transaction */
+ writel_relaxed(0x0,
+ adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee));
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+
+ vchan_dma_desc_free_list(&achan->vc, &head);
+
+ return 0;
+}
+
+static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ unsigned long flag;
+
+ spin_lock_irqsave(&achan->vc.lock, flag);
+ memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
+ spin_unlock_irqrestore(&achan->vc.lock, flag);
+
+ return 0;
+}
+
+/**
+ * adm_start_dma - start next transaction
+ * @achan - ADM dma channel
+ */
+static void adm_start_dma(struct adm_chan *achan)
+{
+ struct virt_dma_desc *vd = vchan_next_desc(&achan->vc);
+ struct adm_device *adev = achan->adev;
+ struct adm_async_desc *async_desc;
+
+ lockdep_assert_held(&achan->vc.lock);
+
+ if (!vd)
+ return;
+
+ list_del(&vd->node);
+
+ /* write next command list out to the CMD FIFO */
+ async_desc = container_of(vd, struct adm_async_desc, vd);
+ achan->curr_txd = async_desc;
+
+ /* reset channel error */
+ achan->error = 0;
+
+ if (!achan->initialized) {
+ /* enable interrupts */
+ writel(ADM_CH_CONF_SHADOW_EN |
+ ADM_CH_CONF_PERM_MPU_CONF |
+ ADM_CH_CONF_MPU_DISABLE |
+ ADM_CH_CONF_SEC_DOMAIN(adev->ee),
+ adev->regs + ADM_CH_CONF(achan->id));
+
+ writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN,
+ adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
+
+ achan->initialized = 1;
+ }
+
+ /* set the crci block size if this transaction requires CRCI */
+ if (async_desc->crci) {
+ writel(async_desc->mux | async_desc->blk_size,
+ adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee));
+ }
+
+ /* make sure IRQ enable doesn't get reordered */
+ wmb();
+
+ /* write next command list out to the CMD FIFO */
+ writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3,
+ adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee));
+}
+
+/**
+ * adm_dma_irq - irq handler for ADM controller
+ * @irq: IRQ of interrupt
+ * @data: callback data
+ *
+ * IRQ handler for the bam controller
+ */
+static irqreturn_t adm_dma_irq(int irq, void *data)
+{
+ struct adm_device *adev = data;
+ u32 srcs, i;
+ struct adm_async_desc *async_desc;
+ unsigned long flags;
+
+ srcs = readl_relaxed(adev->regs +
+ ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee));
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
+ struct adm_chan *achan = &adev->channels[i];
+ u32 status, result;
+
+ if (srcs & BIT(i)) {
+ status = readl_relaxed(adev->regs +
+ ADM_CH_STATUS_SD(i, adev->ee));
+
+ /* if no result present, skip */
+ if (!(status & ADM_CH_STATUS_VALID))
+ continue;
+
+ result = readl_relaxed(adev->regs +
+ ADM_CH_RSLT(i, adev->ee));
+
+ /* no valid results, skip */
+ if (!(result & ADM_CH_RSLT_VALID))
+ continue;
+
+ /* flag error if transaction was flushed or failed */
+ if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH))
+ achan->error = 1;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+ async_desc = achan->curr_txd;
+
+ achan->curr_txd = NULL;
+
+ if (async_desc) {
+ vchan_cookie_complete(&async_desc->vd);
+
+ /* kick off next DMA */
+ adm_start_dma(achan);
+ }
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * adm_tx_status - returns status of transaction
+ * @chan: dma channel
+ * @cookie: transaction cookie
+ * @txstate: DMA transaction state
+ *
+ * Return status of dma transaction
+ */
+static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct virt_dma_desc *vd;
+ enum dma_status ret;
+ unsigned long flags;
+ size_t residue = 0;
+
+ ret = dma_cookie_status(chan, cookie, txstate);
+ if (ret == DMA_COMPLETE || !txstate)
+ return ret;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+
+ vd = vchan_find_desc(&achan->vc, cookie);
+ if (vd)
+ residue = container_of(vd, struct adm_async_desc, vd)->length;
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+
+ /*
+ * residue is either the full length if it is in the issued list, or 0
+ * if it is in progress. We have no reliable way of determining
+ * anything inbetween
+ */
+ dma_set_residue(txstate, residue);
+
+ if (achan->error)
+ return DMA_ERROR;
+
+ return ret;
+}
+
+/**
+ * adm_issue_pending - starts pending transactions
+ * @chan: dma channel
+ *
+ * Issues all pending transactions and starts DMA
+ */
+static void adm_issue_pending(struct dma_chan *chan)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+
+ if (vchan_issue_pending(&achan->vc) && !achan->curr_txd)
+ adm_start_dma(achan);
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+}
+
+/**
+ * adm_dma_free_desc - free descriptor memory
+ * @vd: virtual descriptor
+ *
+ */
+static void adm_dma_free_desc(struct virt_dma_desc *vd)
+{
+ struct adm_async_desc *async_desc = container_of(vd,
+ struct adm_async_desc, vd);
+
+ dma_unmap_single(async_desc->adev->dev, async_desc->dma_addr,
+ async_desc->dma_len, DMA_TO_DEVICE);
+ kfree(async_desc->cpl);
+ kfree(async_desc);
+}
+
+static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
+ u32 index)
+{
+ achan->id = index;
+ achan->adev = adev;
+
+ vchan_init(&achan->vc, &adev->common);
+ achan->vc.desc_free = adm_dma_free_desc;
+}
+
+static int adm_dma_probe(struct platform_device *pdev)
+{
+ struct adm_device *adev;
+ int ret;
+ u32 i;
+
+ adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
+ if (!adev)
+ return -ENOMEM;
+
+ adev->dev = &pdev->dev;
+
+ adev->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(adev->regs))
+ return PTR_ERR(adev->regs);
+
+ adev->irq = platform_get_irq(pdev, 0);
+ if (adev->irq < 0)
+ return adev->irq;
+
+ ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee);
+ if (ret) {
+ dev_err(adev->dev, "Execution environment unspecified\n");
+ return ret;
+ }
+
+ adev->core_clk = devm_clk_get(adev->dev, "core");
+ if (IS_ERR(adev->core_clk))
+ return PTR_ERR(adev->core_clk);
+
+ adev->iface_clk = devm_clk_get(adev->dev, "iface");
+ if (IS_ERR(adev->iface_clk))
+ return PTR_ERR(adev->iface_clk);
+
+ adev->clk_reset = devm_reset_control_get_exclusive(&pdev->dev, "clk");
+ if (IS_ERR(adev->clk_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 reset\n");
+ return PTR_ERR(adev->clk_reset);
+ }
+
+ adev->c0_reset = devm_reset_control_get_exclusive(&pdev->dev, "c0");
+ if (IS_ERR(adev->c0_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C0 reset\n");
+ return PTR_ERR(adev->c0_reset);
+ }
+
+ adev->c1_reset = devm_reset_control_get_exclusive(&pdev->dev, "c1");
+ if (IS_ERR(adev->c1_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C1 reset\n");
+ return PTR_ERR(adev->c1_reset);
+ }
+
+ adev->c2_reset = devm_reset_control_get_exclusive(&pdev->dev, "c2");
+ if (IS_ERR(adev->c2_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C2 reset\n");
+ return PTR_ERR(adev->c2_reset);
+ }
+
+ ret = clk_prepare_enable(adev->core_clk);
+ if (ret) {
+ dev_err(adev->dev, "failed to prepare/enable core clock\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(adev->iface_clk);
+ if (ret) {
+ dev_err(adev->dev, "failed to prepare/enable iface clock\n");
+ goto err_disable_core_clk;
+ }
+
+ reset_control_assert(adev->clk_reset);
+ reset_control_assert(adev->c0_reset);
+ reset_control_assert(adev->c1_reset);
+ reset_control_assert(adev->c2_reset);
+
+ udelay(2);
+
+ reset_control_deassert(adev->clk_reset);
+ reset_control_deassert(adev->c0_reset);
+ reset_control_deassert(adev->c1_reset);
+ reset_control_deassert(adev->c2_reset);
+
+ adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS,
+ sizeof(*adev->channels), GFP_KERNEL);
+
+ if (!adev->channels) {
+ ret = -ENOMEM;
+ goto err_disable_clks;
+ }
+
+ /* allocate and initialize channels */
+ INIT_LIST_HEAD(&adev->common.channels);
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++)
+ adm_channel_init(adev, &adev->channels[i], i);
+
+ /* reset CRCIs */
+ for (i = 0; i < 16; i++)
+ writel(ADM_CRCI_CTL_RST, adev->regs +
+ ADM_CRCI_CTL(i, adev->ee));
+
+ /* configure client interfaces */
+ writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0));
+ writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1));
+ writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2));
+ writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf),
+ adev->regs + ADM_GP_CTL);
+
+ ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq,
+ 0, "adm_dma", adev);
+ if (ret)
+ goto err_disable_clks;
+
+ platform_set_drvdata(pdev, adev);
+
+ adev->common.dev = adev->dev;
+ adev->common.dev->dma_parms = &adev->dma_parms;
+
+ /* set capabilities */
+ dma_cap_zero(adev->common.cap_mask);
+ dma_cap_set(DMA_SLAVE, adev->common.cap_mask);
+ dma_cap_set(DMA_PRIVATE, adev->common.cap_mask);
+
+ /* initialize dmaengine apis */
+ adev->common.directions = BIT(DMA_DEV_TO_MEM | DMA_MEM_TO_DEV);
+ adev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
+ adev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ adev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ adev->common.device_free_chan_resources = adm_free_chan;
+ adev->common.device_prep_slave_sg = adm_prep_slave_sg;
+ adev->common.device_issue_pending = adm_issue_pending;
+ adev->common.device_tx_status = adm_tx_status;
+ adev->common.device_terminate_all = adm_terminate_all;
+ adev->common.device_config = adm_slave_config;
+
+ ret = dma_async_device_register(&adev->common);
+ if (ret) {
+ dev_err(adev->dev, "failed to register dma async device\n");
+ goto err_disable_clks;
+ }
+
+ ret = of_dma_controller_register(pdev->dev.of_node,
+ of_dma_xlate_by_chan_id,
+ &adev->common);
+ if (ret)
+ goto err_unregister_dma;
+
+ return 0;
+
+err_unregister_dma:
+ dma_async_device_unregister(&adev->common);
+err_disable_clks:
+ clk_disable_unprepare(adev->iface_clk);
+err_disable_core_clk:
+ clk_disable_unprepare(adev->core_clk);
+
+ return ret;
+}
+
+static int adm_dma_remove(struct platform_device *pdev)
+{
+ struct adm_device *adev = platform_get_drvdata(pdev);
+ struct adm_chan *achan;
+ u32 i;
+
+ of_dma_controller_free(pdev->dev.of_node);
+ dma_async_device_unregister(&adev->common);
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
+ achan = &adev->channels[i];
+
+ /* mask IRQs for this channel/EE pair */
+ writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
+
+ tasklet_kill(&adev->channels[i].vc.task);
+ adm_terminate_all(&adev->channels[i].vc.chan);
+ }
+
+ devm_free_irq(adev->dev, adev->irq, adev);
+
+ clk_disable_unprepare(adev->core_clk);
+ clk_disable_unprepare(adev->iface_clk);
+
+ return 0;
+}
+
+static const struct of_device_id adm_of_match[] = {
+ { .compatible = "qcom,adm", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, adm_of_match);
+
+static struct platform_driver adm_dma_driver = {
+ .probe = adm_dma_probe,
+ .remove = adm_dma_remove,
+ .driver = {
+ .name = "adm-dma-engine",
+ .of_match_table = adm_of_match,
+ },
+};
+
+module_platform_driver(adm_dma_driver);
+
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM ADM DMA engine driver");
+MODULE_LICENSE("GPL v2");

217
target/linux/ipq806x/patches-5.15/101-5.12-mtd-parsers-Add-Qcom-SMEM-parser.patch
View file

@ -1,217 +0,0 @@
From 803eb124e1a64e42888542c3444bfe6dac412c7f Mon Sep 17 00:00:00 2001
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Date: Mon, 4 Jan 2021 09:41:35 +0530
Subject: mtd: parsers: Add Qcom SMEM parser
NAND based Qualcomm platforms have the partition table populated in the
Shared Memory (SMEM). Hence, add a parser for parsing the partitions
from it.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210104041137.113075-3-manivannan.sadhasivam@linaro.org
---
drivers/mtd/parsers/Kconfig | 8 ++
drivers/mtd/parsers/Makefile | 1 +
drivers/mtd/parsers/qcomsmempart.c | 170 +++++++++++++++++++++++++++++++++++++
3 files changed, 179 insertions(+)
create mode 100644 drivers/mtd/parsers/qcomsmempart.c
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -196,6 +196,14 @@ config MTD_REDBOOT_PARTS_READONLY
endif # MTD_REDBOOT_PARTS
+config MTD_QCOMSMEM_PARTS
+ tristate "Qualcomm SMEM NAND flash partition parser"
+ depends on MTD_NAND_QCOM || COMPILE_TEST
+ depends on QCOM_SMEM
+ help
+ This provides support for parsing partitions from Shared Memory (SMEM)
+ for NAND flash on Qualcomm platforms.
+
config MTD_ROUTERBOOT_PARTS
tristate "RouterBoot flash partition parser"
depends on MTD && OF
--- a/drivers/mtd/parsers/Makefile
+++ b/drivers/mtd/parsers/Makefile
@@ -13,4 +13,5 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
+obj-$(CONFIG_MTD_QCOMSMEM_PARTS) += qcomsmempart.o
obj-$(CONFIG_MTD_ROUTERBOOT_PARTS) += routerbootpart.o
--- /dev/null
+++ b/drivers/mtd/parsers/qcomsmempart.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Qualcomm SMEM NAND flash partition parser
+ *
+ * Copyright (C) 2020, Linaro Ltd.
+ */
+
+#include <linux/ctype.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/slab.h>
+#include <linux/soc/qcom/smem.h>
+
+#define SMEM_AARM_PARTITION_TABLE 9
+#define SMEM_APPS 0
+
+#define SMEM_FLASH_PART_MAGIC1 0x55ee73aa
+#define SMEM_FLASH_PART_MAGIC2 0xe35ebddb
+#define SMEM_FLASH_PTABLE_V3 3
+#define SMEM_FLASH_PTABLE_V4 4
+#define SMEM_FLASH_PTABLE_MAX_PARTS_V3 16
+#define SMEM_FLASH_PTABLE_MAX_PARTS_V4 48
+#define SMEM_FLASH_PTABLE_HDR_LEN (4 * sizeof(u32))
+#define SMEM_FLASH_PTABLE_NAME_SIZE 16
+
+/**
+ * struct smem_flash_pentry - SMEM Flash partition entry
+ * @name: Name of the partition
+ * @offset: Offset in blocks
+ * @length: Length of the partition in blocks
+ * @attr: Flags for this partition
+ */
+struct smem_flash_pentry {
+ char name[SMEM_FLASH_PTABLE_NAME_SIZE];
+ __le32 offset;
+ __le32 length;
+ u8 attr;
+} __packed __aligned(4);
+
+/**
+ * struct smem_flash_ptable - SMEM Flash partition table
+ * @magic1: Partition table Magic 1
+ * @magic2: Partition table Magic 2
+ * @version: Partition table version
+ * @numparts: Number of partitions in this ptable
+ * @pentry: Flash partition entries belonging to this ptable
+ */
+struct smem_flash_ptable {
+ __le32 magic1;
+ __le32 magic2;
+ __le32 version;
+ __le32 numparts;
+ struct smem_flash_pentry pentry[SMEM_FLASH_PTABLE_MAX_PARTS_V4];
+} __packed __aligned(4);
+
+static int parse_qcomsmem_part(struct mtd_info *mtd,
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct smem_flash_pentry *pentry;
+ struct smem_flash_ptable *ptable;
+ size_t len = SMEM_FLASH_PTABLE_HDR_LEN;
+ struct mtd_partition *parts;
+ int ret, i, numparts;
+ char *name, *c;
+
+ pr_debug("Parsing partition table info from SMEM\n");
+ ptable = qcom_smem_get(SMEM_APPS, SMEM_AARM_PARTITION_TABLE, &len);
+ if (IS_ERR(ptable)) {
+ pr_err("Error reading partition table header\n");
+ return PTR_ERR(ptable);
+ }
+
+ /* Verify ptable magic */
+ if (le32_to_cpu(ptable->magic1) != SMEM_FLASH_PART_MAGIC1 ||
+ le32_to_cpu(ptable->magic2) != SMEM_FLASH_PART_MAGIC2) {
+ pr_err("Partition table magic verification failed\n");
+ return -EINVAL;
+ }
+
+ /* Ensure that # of partitions is less than the max we have allocated */
+ numparts = le32_to_cpu(ptable->numparts);
+ if (numparts > SMEM_FLASH_PTABLE_MAX_PARTS_V4) {
+ pr_err("Partition numbers exceed the max limit\n");
+ return -EINVAL;
+ }
+
+ /* Find out length of partition data based on table version */
+ if (le32_to_cpu(ptable->version) <= SMEM_FLASH_PTABLE_V3) {
+ len = SMEM_FLASH_PTABLE_HDR_LEN + SMEM_FLASH_PTABLE_MAX_PARTS_V3 *
+ sizeof(struct smem_flash_pentry);
+ } else if (le32_to_cpu(ptable->version) == SMEM_FLASH_PTABLE_V4) {
+ len = SMEM_FLASH_PTABLE_HDR_LEN + SMEM_FLASH_PTABLE_MAX_PARTS_V4 *
+ sizeof(struct smem_flash_pentry);
+ } else {
+ pr_err("Unknown ptable version (%d)", le32_to_cpu(ptable->version));
+ return -EINVAL;
+ }
+
+ /*
+ * Now that the partition table header has been parsed, verified
+ * and the length of the partition table calculated, read the
+ * complete partition table
+ */
+ ptable = qcom_smem_get(SMEM_APPS, SMEM_AARM_PARTITION_TABLE, &len);
+ if (IS_ERR_OR_NULL(ptable)) {
+ pr_err("Error reading partition table\n");
+ return PTR_ERR(ptable);
+ }
+
+ parts = kcalloc(numparts, sizeof(*parts), GFP_KERNEL);
+ if (!parts)
+ return -ENOMEM;
+
+ for (i = 0; i < numparts; i++) {
+ pentry = &ptable->pentry[i];
+ if (pentry->name[0] == '\0')
+ continue;
+
+ name = kstrdup(pentry->name, GFP_KERNEL);
+ if (!name) {
+ ret = -ENOMEM;
+ goto out_free_parts;
+ }
+
+ /* Convert name to lower case */
+ for (c = name; *c != '\0'; c++)
+ *c = tolower(*c);
+
+ parts[i].name = name;
+ parts[i].offset = le32_to_cpu(pentry->offset) * mtd->erasesize;
+ parts[i].mask_flags = pentry->attr;
+ parts[i].size = le32_to_cpu(pentry->length) * mtd->erasesize;
+ pr_debug("%d: %s offs=0x%08x size=0x%08x attr:0x%08x\n",
+ i, pentry->name, le32_to_cpu(pentry->offset),
+ le32_to_cpu(pentry->length), pentry->attr);
+ }
+
+ pr_debug("SMEM partition table found: ver: %d len: %d\n",
+ le32_to_cpu(ptable->version), numparts);
+ *pparts = parts;
+
+ return numparts;
+
+out_free_parts:
+ while (--i >= 0)
+ kfree(parts[i].name);
+ kfree(parts);
+ *pparts = NULL;
+
+ return ret;
+}
+
+static const struct of_device_id qcomsmem_of_match_table[] = {
+ { .compatible = "qcom,smem-part" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, qcomsmem_of_match_table);
+
+static struct mtd_part_parser mtd_parser_qcomsmem = {
+ .parse_fn = parse_qcomsmem_part,
+ .name = "qcomsmem",
+ .of_match_table = qcomsmem_of_match_table,
+};
+module_mtd_part_parser(mtd_parser_qcomsmem);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
+MODULE_DESCRIPTION("Qualcomm SMEM NAND flash partition parser");

285
target/linux/ipq806x/patches-5.15/104-1-drivers-thermal-tsens-Add-VER_0-tsens-version.patch
View file

@ -1,285 +0,0 @@
From 5c7d1181056feef0b58fb2f556f55e170ba5b479 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Sat, 25 Jul 2020 19:14:59 +0200
Subject: [PATCH 01/10] drivers: thermal: tsens: Add VER_0 tsens version
VER_0 is used to describe device based on tsens version before v0.1.
These device are devices based on msm8960 for example apq8064 or
ipq806x.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
---
drivers/thermal/qcom/tsens.c | 150 ++++++++++++++++++++++++++++-------
drivers/thermal/qcom/tsens.h | 4 +-
2 files changed, 124 insertions(+), 30 deletions(-)
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -12,6 +12,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
+#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/regmap.h>
@@ -515,6 +516,15 @@ static irqreturn_t tsens_irq_thread(int
dev_dbg(priv->dev, "[%u] %s: no violation: %d\n",
hw_id, __func__, temp);
}
+
+ if (tsens_version(priv) < VER_0_1) {
+ /* Constraint: There is only 1 interrupt control register for all
+ * 11 temperature sensor. So monitoring more than 1 sensor based
+ * on interrupts will yield inconsistent result. To overcome this
+ * issue we will monitor only sensor 0 which is the master sensor.
+ */
+ break;
+ }
}
return IRQ_HANDLED;
@@ -530,6 +540,13 @@ static int tsens_set_trips(void *_sensor
int high_val, low_val, cl_high, cl_low;
u32 hw_id = s->hw_id;
+ if (tsens_version(priv) < VER_0_1) {
+ /* Pre v0.1 IP had a single register for each type of interrupt
+ * and thresholds
+ */
+ hw_id = 0;
+ }
+
dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
hw_id, __func__, low, high);
@@ -584,18 +601,21 @@ int get_temp_tsens_valid(const struct ts
u32 valid;
int ret;
- ret = regmap_field_read(priv->rf[valid_idx], &valid);
- if (ret)
- return ret;
- while (!valid) {
- /* Valid bit is 0 for 6 AHB clock cycles.
- * At 19.2MHz, 1 AHB clock is ~60ns.
- * We should enter this loop very, very rarely.
- */
- ndelay(400);
+ /* VER_0 doesn't have VALID bit */
+ if (tsens_version(priv) >= VER_0_1) {
ret = regmap_field_read(priv->rf[valid_idx], &valid);
if (ret)
return ret;
+ while (!valid) {
+ /* Valid bit is 0 for 6 AHB clock cycles.
+ * At 19.2MHz, 1 AHB clock is ~60ns.
+ * We should enter this loop very, very rarely.
+ */
+ ndelay(400);
+ ret = regmap_field_read(priv->rf[valid_idx], &valid);
+ if (ret)
+ return ret;
+ }
}
/* Valid bit is set, OK to read the temperature */
@@ -608,15 +628,29 @@ int get_temp_common(const struct tsens_s
{
struct tsens_priv *priv = s->priv;
int hw_id = s->hw_id;
- int last_temp = 0, ret;
+ int last_temp = 0, ret, trdy;
+ unsigned long timeout;
- ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
- if (ret)
- return ret;
+ timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
+ do {
+ if (tsens_version(priv) == VER_0) {
+ ret = regmap_field_read(priv->rf[TRDY], &trdy);
+ if (ret)
+ return ret;
+ if (!trdy)
+ continue;
+ }
- *temp = code_to_degc(last_temp, s) * 1000;
+ ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
+ if (ret)
+ return ret;
- return 0;
+ *temp = code_to_degc(last_temp, s) * 1000;
+
+ return 0;
+ } while (time_before(jiffies, timeout));
+
+ return -ETIMEDOUT;
}
#ifdef CONFIG_DEBUG_FS
@@ -738,19 +772,34 @@ int __init init_common(struct tsens_priv
priv->tm_offset = 0x1000;
}
- res = platform_get_resource(op, IORESOURCE_MEM, 0);
- tm_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(tm_base)) {
- ret = PTR_ERR(tm_base);
- goto err_put_device;
+ if (tsens_version(priv) >= VER_0_1) {
+ res = platform_get_resource(op, IORESOURCE_MEM, 0);
+ tm_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(tm_base)) {
+ ret = PTR_ERR(tm_base);
+ goto err_put_device;
+ }
+
+ priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
+ } else { /* VER_0 share the same gcc regs using a syscon */
+ struct device *parent = priv->dev->parent;
+
+ if (parent)
+ priv->tm_map = syscon_node_to_regmap(parent->of_node);
}
- priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
- if (IS_ERR(priv->tm_map)) {
- ret = PTR_ERR(priv->tm_map);
+ if (IS_ERR_OR_NULL(priv->tm_map)) {
+ if (!priv->tm_map)
+ ret = -ENODEV;
+ else
+ ret = PTR_ERR(priv->tm_map);
goto err_put_device;
}
+ /* VER_0 have only tm_map */
+ if (!priv->srot_map)
+ priv->srot_map = priv->tm_map;
+
if (tsens_version(priv) > VER_0_1) {
for (i = VER_MAJOR; i <= VER_STEP; i++) {
priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map,
@@ -771,6 +820,10 @@ int __init init_common(struct tsens_priv
ret = PTR_ERR(priv->rf[TSENS_EN]);
goto err_put_device;
}
+ /* in VER_0 TSENS need to be explicitly enabled */
+ if (tsens_version(priv) == VER_0)
+ regmap_field_write(priv->rf[TSENS_EN], 1);
+
ret = regmap_field_read(priv->rf[TSENS_EN], &enabled);
if (ret)
goto err_put_device;
@@ -793,6 +846,19 @@ int __init init_common(struct tsens_priv
goto err_put_device;
}
+ priv->rf[TSENS_SW_RST] =
+ devm_regmap_field_alloc(dev, priv->srot_map, priv->fields[TSENS_SW_RST]);
+ if (IS_ERR(priv->rf[TSENS_SW_RST])) {
+ ret = PTR_ERR(priv->rf[TSENS_SW_RST]);
+ goto err_put_device;
+ }
+
+ priv->rf[TRDY] = devm_regmap_field_alloc(dev, priv->tm_map, priv->fields[TRDY]);
+ if (IS_ERR(priv->rf[TRDY])) {
+ ret = PTR_ERR(priv->rf[TRDY]);
+ goto err_put_device;
+ }
+
/* This loop might need changes if enum regfield_ids is reordered */
for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) {
for (i = 0; i < priv->feat->max_sensors; i++) {
@@ -808,7 +874,7 @@ int __init init_common(struct tsens_priv
}
}
- if (priv->feat->crit_int) {
+ if (priv->feat->crit_int || tsens_version(priv) < VER_0_1) {
/* Loop might need changes if enum regfield_ids is reordered */
for (j = CRITICAL_STATUS_0; j <= CRIT_THRESH_15; j += 16) {
for (i = 0; i < priv->feat->max_sensors; i++) {
@@ -846,7 +912,11 @@ int __init init_common(struct tsens_priv
}
spin_lock_init(&priv->ul_lock);
- tsens_enable_irq(priv);
+
+ /* VER_0 interrupt doesn't need to be enabled */
+ if (tsens_version(priv) >= VER_0_1)
+ tsens_enable_irq(priv);
+
tsens_debug_init(op);
err_put_device:
@@ -945,10 +1015,19 @@ static int tsens_register_irq(struct tse
if (irq == -ENXIO)
ret = 0;
} else {
- ret = devm_request_threaded_irq(&pdev->dev, irq,
- NULL, thread_fn,
- IRQF_ONESHOT,
- dev_name(&pdev->dev), priv);
+ /* VER_0 interrupt is TRIGGER_RISING, VER_0_1 and up is ONESHOT */
+ if (tsens_version(priv) == VER_0)
+ ret = devm_request_threaded_irq(&pdev->dev, irq,
+ thread_fn, NULL,
+ IRQF_TRIGGER_RISING,
+ dev_name(&pdev->dev),
+ priv);
+ else
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ thread_fn, IRQF_ONESHOT,
+ dev_name(&pdev->dev),
+ priv);
+
if (ret)
dev_err(&pdev->dev, "%s: failed to get irq\n",
__func__);
@@ -977,6 +1056,19 @@ static int tsens_register(struct tsens_p
priv->ops->enable(priv, i);
}
+ /* VER_0 require to set MIN and MAX THRESH
+ * These 2 regs are set using the:
+ * - CRIT_THRESH_0 for MAX THRESH hardcoded to 120°C
+ * - CRIT_THRESH_1 for MIN THRESH hardcoded to 0°C
+ */
+ if (tsens_version(priv) < VER_0_1) {
+ regmap_field_write(priv->rf[CRIT_THRESH_0],
+ tsens_mC_to_hw(priv->sensor, 120000));
+
+ regmap_field_write(priv->rf[CRIT_THRESH_1],
+ tsens_mC_to_hw(priv->sensor, 0));
+ }
+
ret = tsens_register_irq(priv, "uplow", tsens_irq_thread);
if (ret < 0)
return ret;
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -13,6 +13,7 @@
#define CAL_DEGC_PT2 120
#define SLOPE_FACTOR 1000
#define SLOPE_DEFAULT 3200
+#define TIMEOUT_US 100
#define THRESHOLD_MAX_ADC_CODE 0x3ff
#define THRESHOLD_MIN_ADC_CODE 0x0
@@ -25,7 +26,8 @@ struct tsens_priv;
/* IP version numbers in ascending order */
enum tsens_ver {
- VER_0_1 = 0,
+ VER_0 = 0,
+ VER_0_1,
VER_1_X,
VER_2_X,
};

28
target/linux/ipq806x/patches-5.15/104-2-drivers-thermal-tsens-Don-t-hardcode-sensor-slope.patch
View file

@ -1,28 +0,0 @@
From efa0d50a6c5ec7619371dfe4d3e6ca54b73787d5 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Wed, 25 Nov 2020 16:47:21 +0100
Subject: [PATCH 02/10] drivers: thermal: tsens: Don't hardcode sensor slope
Function compute_intercept_slope hardcode the sensor slope to
SLOPE_DEFAULT. Change this and use the default value only if a slope is
not defined. This is needed for tsens VER_0 that has a hardcoded slope
table.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
---
drivers/thermal/qcom/tsens.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -86,7 +86,8 @@ void compute_intercept_slope(struct tsen
"%s: sensor%d - data_point1:%#x data_point2:%#x\n",
__func__, i, p1[i], p2[i]);
- priv->sensor[i].slope = SLOPE_DEFAULT;
+ if (!priv->sensor[i].slope)
+ priv->sensor[i].slope = SLOPE_DEFAULT;
if (mode == TWO_PT_CALIB) {
/*
* slope (m) = adc_code2 - adc_code1 (y2 - y1)/

119
target/linux/ipq806x/patches-5.15/104-3-drivers-thermal-tsens-Convert-msm8960-to-reg_field.patch
View file

@ -1,119 +0,0 @@
From 6bac2e2fa36c2d7c304768a689d8b73155b90aa2 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Wed, 25 Nov 2020 17:15:51 +0100
Subject: [PATCH 03/10] drivers: thermal: tsens: Convert msm8960 to reg_field
Convert msm9860 driver to reg_field to use the init_common
function.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
---
drivers/thermal/qcom/tsens-8960.c | 80 ++++++++++++++++++++++++++++++-
1 file changed, 79 insertions(+), 1 deletion(-)
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -51,11 +51,22 @@
#define MIN_LIMIT_TH 0x0
#define MAX_LIMIT_TH 0xff
-#define S0_STATUS_ADDR 0x3628
#define INT_STATUS_ADDR 0x363c
#define TRDY_MASK BIT(7)
#define TIMEOUT_US 100
+#define S0_STATUS_OFF 0x3628
+#define S1_STATUS_OFF 0x362c
+#define S2_STATUS_OFF 0x3630
+#define S3_STATUS_OFF 0x3634
+#define S4_STATUS_OFF 0x3638
+#define S5_STATUS_OFF 0x3664 /* Sensors 5-10 found on apq8064/msm8960 */
+#define S6_STATUS_OFF 0x3668
+#define S7_STATUS_OFF 0x366c
+#define S8_STATUS_OFF 0x3670
+#define S9_STATUS_OFF 0x3674
+#define S10_STATUS_OFF 0x3678
+
static int suspend_8960(struct tsens_priv *priv)
{
int ret;
@@ -269,6 +280,71 @@ static int get_temp_8960(const struct ts
return -ETIMEDOUT;
}
+static struct tsens_features tsens_8960_feat = {
+ .ver_major = VER_0,
+ .crit_int = 0,
+ .adc = 1,
+ .srot_split = 0,
+ .max_sensors = 11,
+};
+
+static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = {
+ /* ----- SROT ------ */
+ /* No VERSION information */
+
+ /* CNTL */
+ [TSENS_EN] = REG_FIELD(CNTL_ADDR, 0, 0),
+ [TSENS_SW_RST] = REG_FIELD(CNTL_ADDR, 1, 1),
+ /* 8960 has 5 sensors, 8660 has 11, we only handle 5 */
+ [SENSOR_EN] = REG_FIELD(CNTL_ADDR, 3, 7),
+
+ /* ----- TM ------ */
+ /* INTERRUPT ENABLE */
+ /* NO INTERRUPT ENABLE */
+
+ /* Single UPPER/LOWER TEMPERATURE THRESHOLD for all sensors */
+ [LOW_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 0, 7),
+ [UP_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 8, 15),
+ /* MIN_THRESH_0 and MAX_THRESH_0 are not present in the regfield
+ * Recycle CRIT_THRESH_0 and 1 to set the required regs to hardcoded temp
+ * MIN_THRESH_0 -> CRIT_THRESH_1
+ * MAX_THRESH_0 -> CRIT_THRESH_0
+ */
+ [CRIT_THRESH_1] = REG_FIELD(THRESHOLD_ADDR, 16, 23),
+ [CRIT_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 24, 31),
+
+ /* UPPER/LOWER INTERRUPT [CLEAR/STATUS] */
+ /* 1 == clear, 0 == normal operation */
+ [LOW_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 9, 9),
+ [UP_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 10, 10),
+
+ /* NO CRITICAL INTERRUPT SUPPORT on 8960 */
+
+ /* Sn_STATUS */
+ [LAST_TEMP_0] = REG_FIELD(S0_STATUS_OFF, 0, 7),
+ [LAST_TEMP_1] = REG_FIELD(S1_STATUS_OFF, 0, 7),
+ [LAST_TEMP_2] = REG_FIELD(S2_STATUS_OFF, 0, 7),
+ [LAST_TEMP_3] = REG_FIELD(S3_STATUS_OFF, 0, 7),
+ [LAST_TEMP_4] = REG_FIELD(S4_STATUS_OFF, 0, 7),
+ [LAST_TEMP_5] = REG_FIELD(S5_STATUS_OFF, 0, 7),
+ [LAST_TEMP_6] = REG_FIELD(S6_STATUS_OFF, 0, 7),
+ [LAST_TEMP_7] = REG_FIELD(S7_STATUS_OFF, 0, 7),
+ [LAST_TEMP_8] = REG_FIELD(S8_STATUS_OFF, 0, 7),
+ [LAST_TEMP_9] = REG_FIELD(S9_STATUS_OFF, 0, 7),
+ [LAST_TEMP_10] = REG_FIELD(S10_STATUS_OFF, 0, 7),
+
+ /* No VALID field on 8960 */
+ /* TSENS_INT_STATUS bits: 1 == threshold violated */
+ [MIN_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 0, 0),
+ [LOWER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 1, 1),
+ [UPPER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 2, 2),
+ /* No CRITICAL field on 8960 */
+ [MAX_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 3, 3),
+
+ /* TRDY: 1=ready, 0=in progress */
+ [TRDY] = REG_FIELD(INT_STATUS_ADDR, 7, 7),
+};
+
static const struct tsens_ops ops_8960 = {
.init = init_8960,
.calibrate = calibrate_8960,
@@ -282,4 +358,6 @@ static const struct tsens_ops ops_8960 =
struct tsens_plat_data data_8960 = {
.num_sensors = 11,
.ops = &ops_8960,
+ .feat = &tsens_8960_feat,
+ .fields = tsens_8960_regfields,
};

81
target/linux/ipq806x/patches-5.15/104-4-drivers-thermal-tsens-Use-init_common-for-msm8960.patch
View file

@ -1,81 +0,0 @@
From c04f98a496929f75d75c65115d5717423c3d0634 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Wed, 25 Nov 2020 17:16:36 +0100
Subject: [PATCH 04/10] drivers: thermal: tsens: Use init_common for msm8960
Use init_common and drop custom init for msm8960.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
---
drivers/thermal/qcom/tsens-8960.c | 52 +------------------------------
1 file changed, 1 insertion(+), 51 deletions(-)
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -173,56 +173,6 @@ static void disable_8960(struct tsens_pr
regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
}
-static int init_8960(struct tsens_priv *priv)
-{
- int ret, i;
- u32 reg_cntl;
-
- priv->tm_map = dev_get_regmap(priv->dev, NULL);
- if (!priv->tm_map)
- return -ENODEV;
-
- /*
- * The status registers for each sensor are discontiguous
- * because some SoCs have 5 sensors while others have more
- * but the control registers stay in the same place, i.e
- * directly after the first 5 status registers.
- */
- for (i = 0; i < priv->num_sensors; i++) {
- if (i >= 5)
- priv->sensor[i].status = S0_STATUS_ADDR + 40;
- priv->sensor[i].status += i * 4;
- }
-
- reg_cntl = SW_RST;
- ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
- if (ret)
- return ret;
-
- if (priv->num_sensors > 1) {
- reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
- reg_cntl &= ~SW_RST;
- ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR,
- CONFIG_MASK, CONFIG);
- } else {
- reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
- reg_cntl &= ~CONFIG_MASK_8660;
- reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
- }
-
- reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT;
- ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
- if (ret)
- return ret;
-
- reg_cntl |= EN;
- ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
- if (ret)
- return ret;
-
- return 0;
-}
-
static int calibrate_8960(struct tsens_priv *priv)
{
int i;
@@ -346,7 +296,7 @@ static const struct reg_field tsens_8960
};
static const struct tsens_ops ops_8960 = {
- .init = init_8960,
+ .init = init_common,
.calibrate = calibrate_8960,
.get_temp = get_temp_8960,
.enable = enable_8960,

66
target/linux/ipq806x/patches-5.15/104-5-drivers-thermal-tsens-Fix-bug-in-sensor-enable-for-m.patch
View file

@ -1,66 +0,0 @@
From b3e8bd33b84a6b6c863bd1733bd15b5f1483b8ab Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Wed, 25 Nov 2020 17:06:55 +0100
Subject: [PATCH 05/10] drivers: thermal: tsens: Fix bug in sensor enable for
msm8960
Device based on tsens VER_0 contains a hardware bug that results in some
problem with sensor enablement. Sensor id 6-11 can't be enabled
selectively and all of them must be enabled in one step.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
---
drivers/thermal/qcom/tsens-8960.c | 23 ++++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -27,9 +27,9 @@
#define EN BIT(0)
#define SW_RST BIT(1)
#define SENSOR0_EN BIT(3)
+#define MEASURE_PERIOD BIT(18)
#define SLP_CLK_ENA BIT(26)
#define SLP_CLK_ENA_8660 BIT(24)
-#define MEASURE_PERIOD 1
#define SENSOR0_SHIFT 3
/* INT_STATUS_ADDR bitmasks */
@@ -126,17 +126,34 @@ static int resume_8960(struct tsens_priv
static int enable_8960(struct tsens_priv *priv, int id)
{
int ret;
- u32 reg, mask;
+ u32 reg, mask = BIT(id);
ret = regmap_read(priv->tm_map, CNTL_ADDR, &reg);
if (ret)
return ret;
- mask = BIT(id + SENSOR0_SHIFT);
+ /* HARDWARE BUG:
+ * On platforms with more than 6 sensors, all remaining sensors
+ * must be enabled together, otherwise undefined results are expected.
+ * (Sensor 6-7 disabled, Sensor 3 disabled...) In the original driver,
+ * all the sensors are enabled in one step hence this bug is not
+ * triggered.
+ */
+ if (id > 5)
+ mask = GENMASK(10, 6);
+
+ mask <<= SENSOR0_SHIFT;
+
+ /* Sensors already enabled. Skip. */
+ if ((reg & mask) == mask)
+ return 0;
+
ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST);
if (ret)
return ret;
+ reg |= MEASURE_PERIOD;
+
if (priv->num_sensors > 1)
reg |= mask | SLP_CLK_ENA | EN;
else

109
target/linux/ipq806x/patches-5.15/104-6-drivers-thermal-tsens-Replace-custom-8960-apis-with-.patch
View file

@ -1,109 +0,0 @@
From 1ff9f982051759e0387e8c7e793b49c48eae291d Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Wed, 25 Nov 2020 17:11:05 +0100
Subject: [PATCH 06/10] drivers: thermal: tsens: Replace custom 8960 apis with
generic apis
Rework calibrate function to use common function. Derive the offset from
a missing hardcoded slope table and the data from the nvmem calib
efuses.
Drop custom get_temp function and use generic api.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
---
drivers/thermal/qcom/tsens-8960.c | 56 +++++++++----------------------
1 file changed, 15 insertions(+), 41 deletions(-)
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -67,6 +67,13 @@
#define S9_STATUS_OFF 0x3674
#define S10_STATUS_OFF 0x3678
+/* Original slope - 200 to compensate mC to C inaccuracy */
+static u32 tsens_msm8960_slope[] = {
+ 976, 976, 954, 976,
+ 911, 932, 932, 999,
+ 932, 999, 932
+ };
+
static int suspend_8960(struct tsens_priv *priv)
{
int ret;
@@ -194,9 +201,7 @@ static int calibrate_8960(struct tsens_p
{
int i;
char *data;
-
- ssize_t num_read = priv->num_sensors;
- struct tsens_sensor *s = priv->sensor;
+ u32 p1[11];
data = qfprom_read(priv->dev, "calib");
if (IS_ERR(data))
@@ -204,49 +209,18 @@ static int calibrate_8960(struct tsens_p
if (IS_ERR(data))
return PTR_ERR(data);
- for (i = 0; i < num_read; i++, s++)
- s->offset = data[i];
+ for (i = 0; i < priv->num_sensors; i++) {
+ p1[i] = data[i];
+ priv->sensor[i].slope = tsens_msm8960_slope[i];
+ }
+
+ compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB);
kfree(data);
return 0;
}
-/* Temperature on y axis and ADC-code on x-axis */
-static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
-{
- int slope, offset;
-
- slope = thermal_zone_get_slope(s->tzd);
- offset = CAL_MDEGC - slope * s->offset;
-
- return adc_code * slope + offset;
-}
-
-static int get_temp_8960(const struct tsens_sensor *s, int *temp)
-{
- int ret;
- u32 code, trdy;
- struct tsens_priv *priv = s->priv;
- unsigned long timeout;
-
- timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
- do {
- ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
- if (ret)
- return ret;
- if (!(trdy & TRDY_MASK))
- continue;
- ret = regmap_read(priv->tm_map, s->status, &code);
- if (ret)
- return ret;
- *temp = code_to_mdegC(code, s);
- return 0;
- } while (time_before(jiffies, timeout));
-
- return -ETIMEDOUT;
-}
-
static struct tsens_features tsens_8960_feat = {
.ver_major = VER_0,
.crit_int = 0,
@@ -315,7 +289,7 @@ static const struct reg_field tsens_8960
static const struct tsens_ops ops_8960 = {
.init = init_common,
.calibrate = calibrate_8960,
- .get_temp = get_temp_8960,
+ .get_temp = get_temp_common,
.enable = enable_8960,
.disable = disable_8960,
.suspend = suspend_8960,

65
target/linux/ipq806x/patches-5.15/104-7-drivers-thermal-tsens-Drop-unused-define-for-msm8960.patch
View file

@ -1,65 +0,0 @@
From 5716a61239c6ac9ceb137e825e93c3aea06c4634 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Fri, 19 Mar 2021 00:48:23 +0100
Subject: [PATCH 07/10] drivers: thermal: tsens: Drop unused define for msm8960
Drop unused define for msm8960 replaced by generic api and reg_field.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
---
drivers/thermal/qcom/tsens-8960.c | 24 +-----------------------
1 file changed, 1 insertion(+), 23 deletions(-)
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -10,8 +10,6 @@
#include <linux/thermal.h>
#include "tsens.h"
-#define CAL_MDEGC 30000
-
#define CONFIG_ADDR 0x3640
#define CONFIG_ADDR_8660 0x3620
/* CONFIG_ADDR bitmasks */
@@ -21,39 +19,19 @@
#define CONFIG_SHIFT_8660 28
#define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660)
-#define STATUS_CNTL_ADDR_8064 0x3660
#define CNTL_ADDR 0x3620
/* CNTL_ADDR bitmasks */
#define EN BIT(0)
#define SW_RST BIT(1)
-#define SENSOR0_EN BIT(3)
+
#define MEASURE_PERIOD BIT(18)
#define SLP_CLK_ENA BIT(26)
#define SLP_CLK_ENA_8660 BIT(24)
#define SENSOR0_SHIFT 3
-/* INT_STATUS_ADDR bitmasks */
-#define MIN_STATUS_MASK BIT(0)
-#define LOWER_STATUS_CLR BIT(1)
-#define UPPER_STATUS_CLR BIT(2)
-#define MAX_STATUS_MASK BIT(3)
-
#define THRESHOLD_ADDR 0x3624
-/* THRESHOLD_ADDR bitmasks */
-#define THRESHOLD_MAX_LIMIT_SHIFT 24
-#define THRESHOLD_MIN_LIMIT_SHIFT 16
-#define THRESHOLD_UPPER_LIMIT_SHIFT 8
-#define THRESHOLD_LOWER_LIMIT_SHIFT 0
-
-/* Initial temperature threshold values */
-#define LOWER_LIMIT_TH 0x50
-#define UPPER_LIMIT_TH 0xdf
-#define MIN_LIMIT_TH 0x0
-#define MAX_LIMIT_TH 0xff
#define INT_STATUS_ADDR 0x363c
-#define TRDY_MASK BIT(7)
-#define TIMEOUT_US 100
#define S0_STATUS_OFF 0x3628
#define S1_STATUS_OFF 0x362c

26
target/linux/ipq806x/patches-5.15/104-8-drivers-thermal-tsens-Add-support-for-ipq8064-tsens.patch
View file

@ -1,26 +0,0 @@
From 0d0c22a59bf2672b57e23da9a9ea743e91b71f54 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Sat, 25 Jul 2020 19:55:57 +0200
Subject: [PATCH 08/10] drivers: thermal: tsens: Add support for ipq8064-tsens
Add support for tsens present in ipq806x SoCs based on generic msm8960
tsens driver.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
---
drivers/thermal/qcom/tsens.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -968,6 +968,9 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, t
static const struct of_device_id tsens_table[] = {
{
+ .compatible = "qcom,ipq8064-tsens",
+ .data = &data_8960,
+ }, {
.compatible = "qcom,msm8916-tsens",
.data = &data_8916,
}, {

112
target/linux/ipq806x/patches-5.15/104-9-dt-bindings-thermal-tsens-Document-ipq8064-bindings.patch
View file

@ -1,112 +0,0 @@
From ac369071920d427dd484cf74cddba2774bba45f5 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Thu, 9 Jul 2020 22:35:54 +0200
Subject: [PATCH 09/10] dt-bindings: thermal: tsens: Document ipq8064 bindings
Document the use of bindings used for msm8960 tsens based devices.
msm8960 use the same gcc regs and is set as a child of the qcom gcc.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../bindings/thermal/qcom-tsens.yaml | 56 ++++++++++++++++---
1 file changed, 48 insertions(+), 8 deletions(-)
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -19,6 +19,11 @@ description: |
properties:
compatible:
oneOf:
+ - description: msm9860 TSENS based
+ items:
+ - enum:
+ - qcom,ipq8064-tsens
+
- description: v0.1 of TSENS
items:
- enum:
@@ -73,7 +78,9 @@ properties:
maxItems: 2
items:
- const: calib
- - const: calib_sel
+ - enum:
+ - calib_backup
+ - calib_sel
"#qcom,sensors":
description:
@@ -88,12 +95,20 @@ properties:
Number of cells required to uniquely identify the thermal sensors. Since
we have multiple sensors this is set to 1
+required:
+ - compatible
+ - interrupts
+ - interrupt-names
+ - "#thermal-sensor-cells"
+ - "#qcom,sensors"
+
allOf:
- if:
properties:
compatible:
contains:
enum:
+ - qcom,ipq8064-tsens
- qcom,msm8916-tsens
- qcom,msm8974-tsens
- qcom,msm8976-tsens
@@ -114,19 +129,44 @@ allOf:
interrupt-names:
minItems: 2
-required:
- - compatible
- - reg
- - "#qcom,sensors"
- - interrupts
- - interrupt-names
- - "#thermal-sensor-cells"
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,tsens-v0_1
+ - qcom,tsens-v1
+ - qcom,tsens-v2
+
+ then:
+ required:
+ - reg
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
+ // Example msm9860 based SoC (ipq8064):
+ gcc: clock-controller {
+
+ /* ... */
+
+ tsens: thermal-sensor {
+ compatible = "qcom,ipq8064-tsens";
+
+ nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+
+ #qcom,sensors = <11>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
// Example 1 (legacy: for pre v1 IP):
tsens1: thermal-sensor@900000 {
compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";

32
target/linux/ipq806x/patches-5.15/105-10-drivers-thermal-tsens-Fix-wrong-slope-on-msm-8960.patch
View file

@ -1,32 +0,0 @@
From 68e720ed73c8f038c8c500e4c49c1e65a993a448 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Tue, 6 Apr 2021 04:45:31 +0200
Subject: [PATCH 10/10] drivers: thermal: tsens: Fix wrong slope on msm-8960
Some user using some stats with the old legacy implementation and the
new implementation using the compute_intercept_slope reported an offset
of 3C. Fix the slope table to reflect the original temp.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
drivers/thermal/qcom/tsens-8960.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -45,11 +45,11 @@
#define S9_STATUS_OFF 0x3674
#define S10_STATUS_OFF 0x3678
-/* Original slope - 200 to compensate mC to C inaccuracy */
+/* Original slope - 350 to compensate mC to C inaccuracy */
static u32 tsens_msm8960_slope[] = {
- 976, 976, 954, 976,
- 911, 932, 932, 999,
- 932, 999, 932
+ 826, 826, 804, 826,
+ 761, 782, 782, 849,
+ 782, 849, 782
};
static int suspend_8960(struct tsens_priv *priv)

75
target/linux/ipq806x/patches-5.15/108-v5.14-net-stmmac-explicitly-deassert-gmac-ahb-reset.patch
View file

@ -1,75 +0,0 @@
From e67f325e9cd67562b761e884680c0fec03a6f404 Mon Sep 17 00:00:00 2001
From: Matthew Hagan <mnhagan88@gmail.com>
Date: Tue, 8 Jun 2021 19:59:06 +0100
Subject: net: stmmac: explicitly deassert GMAC_AHB_RESET
We are currently assuming that GMAC_AHB_RESET will already be deasserted
by the bootloader. However if this has not been done, probing of the GMAC
will fail. To remedy this we must ensure GMAC_AHB_RESET has been deasserted
prior to probing.
v2 changes:
- remove NULL condition check for stmmac_ahb_rst in stmmac_main.c
- unwrap dev_err() message in stmmac_main.c
- add PTR_ERR() around plat->stmmac_ahb_rst in stmmac_platform.c
v3 changes:
- add error pointer to dev_err() output
- add reset_control_assert(stmmac_ahb_rst) in stmmac_dvr_remove
- revert PTR_ERR() around plat->stmmac_ahb_rst since this is performed
on the returned value of ret by the calling function
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 +++++
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 6 ++++++
include/linux/stmmac.h | 1 +
3 files changed, 12 insertions(+)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -5021,6 +5021,10 @@ int stmmac_dvr_probe(struct device *devi
reset_control_reset(priv->plat->stmmac_rst);
}
+ ret = reset_control_deassert(priv->plat->stmmac_ahb_rst);
+ if (ret == -ENOTSUPP)
+ dev_err(priv->device, "unable to bring out of ahb reset\n");
+
/* Init MAC and get the capabilities */
ret = stmmac_hw_init(priv);
if (ret)
@@ -5245,6 +5249,7 @@ int stmmac_dvr_remove(struct device *dev
phylink_destroy(priv->phylink);
if (priv->plat->stmmac_rst)
reset_control_assert(priv->plat->stmmac_rst);
+ reset_control_assert(priv->plat->stmmac_ahb_rst);
pm_runtime_put(dev);
pm_runtime_disable(dev);
if (priv->hw->pcs != STMMAC_PCS_TBI &&
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -617,6 +617,12 @@ stmmac_probe_config_dt(struct platform_d
plat->stmmac_rst = NULL;
}
+ plat->stmmac_ahb_rst = devm_reset_control_get_optional_shared(
+ &pdev->dev, "ahb");
+ if (IS_ERR(plat->stmmac_ahb_rst))
+ if (PTR_ERR(plat->stmmac_ahb_rst) == -EPROBE_DEFER)
+ goto error_hw_init;
+
return plat;
error_hw_init:
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -192,6 +192,7 @@ struct plat_stmmacenet_data {
unsigned int clk_ref_rate;
s32 ptp_max_adj;
struct reset_control *stmmac_rst;
+ struct reset_control *stmmac_ahb_rst;
struct stmmac_axi *axi;
int has_gmac4;
bool has_sun8i;

64
target/linux/ipq806x/patches-5.15/109-v5.15-arm-dts-qcom-add-ahb-reset-to-ipq806x-gmac.patch
View file

@ -1,64 +0,0 @@
From f95c4c56d65225a537a2d88735fde7ec4d37641d Mon Sep 17 00:00:00 2001
From: Matthew Hagan <mnhagan88@gmail.com>
Date: Sat, 5 Jun 2021 18:35:38 +0100
Subject: ARM: dts: qcom: add ahb reset to ipq806x-gmac
Add GMAC_AHB_RESET to the resets property of each gmac node.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Link: https://lore.kernel.org/r/20210605173546.4102455-2-mnhagan88@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1335,8 +1335,9 @@
clocks = <&gcc GMAC_CORE1_CLK>;
clock-names = "stmmaceth";
- resets = <&gcc GMAC_CORE1_RESET>;
- reset-names = "stmmaceth";
+ resets = <&gcc GMAC_CORE1_RESET>,
+ <&gcc GMAC_AHB_RESET>;
+ reset-names = "stmmaceth", "ahb";
status = "disabled";
};
@@ -1358,8 +1359,9 @@
clocks = <&gcc GMAC_CORE2_CLK>;
clock-names = "stmmaceth";
- resets = <&gcc GMAC_CORE2_RESET>;
- reset-names = "stmmaceth";
+ resets = <&gcc GMAC_CORE2_RESET>,
+ <&gcc GMAC_AHB_RESET>;
+ reset-names = "stmmaceth", "ahb";
status = "disabled";
};
@@ -1381,8 +1383,9 @@
clocks = <&gcc GMAC_CORE3_CLK>;
clock-names = "stmmaceth";
- resets = <&gcc GMAC_CORE3_RESET>;
- reset-names = "stmmaceth";
+ resets = <&gcc GMAC_CORE3_RESET>,
+ <&gcc GMAC_AHB_RESET>;
+ reset-names = "stmmaceth", "ahb";
status = "disabled";
};
@@ -1404,8 +1407,9 @@
clocks = <&gcc GMAC_CORE4_CLK>;
clock-names = "stmmaceth";
- resets = <&gcc GMAC_CORE4_RESET>;
- reset-names = "stmmaceth";
+ resets = <&gcc GMAC_CORE4_RESET>,
+ <&gcc GMAC_AHB_RESET>;
+ reset-names = "stmmaceth", "ahb";
status = "disabled";
};