mediatek: filogic: reorder alphabetically

Reorder scripts and image recipes to keep alphabetical order.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>

target/linux/mediatek/filogic/base-files/etc/board.d/02_network

@@ -19,24 +19,27 @@ mediatek_setup_interfaces()
 	asus,tuf-ax6000)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" eth1
 		;;
-	netgear,wax220|\
-	ubnt,unifi-6-plus|\
-	zyxel,nwa50ax-pro)
-		ucidef_set_interface_lan "eth0"
-		;;
 	bananapi,bpi-r3)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "eth1 wan"
 		;;
-	cudy,wr3000-v1)
+	cetron,ct3003|\
-		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+	cudy,wr3000-v1|\
-		;;
+	jcg,q30-pro|\
-	glinet,gl-mt3000)
+	qihoo,360t7)
-		ucidef_set_interfaces_lan_wan eth1 eth0
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan
 		;;
 	cmcc,rax3000m|\
 	h3c,magic-nx30-pro)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1
 		;;
+	glinet,gl-mt3000)
+		ucidef_set_interfaces_lan_wan eth1 eth0
+		;;
+	glinet,gl-mt6000|\
+	tplink,tl-xdr4288|\
+	tplink,tl-xdr6088)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" eth1
+		;;
 	mediatek,mt7986a-rfb)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan6" "eth1 wan"
 		;;
@@ -49,15 +52,10 @@ mediatek_setup_interfaces()
 	mercusys,mr90x-v1)
 		ucidef_set_interfaces_lan_wan "lan0 lan1 lan2" eth1
 		;;
-	cetron,ct3003|\
+	netgear,wax220|\
-	jcg,q30-pro|\
+	ubnt,unifi-6-plus|\
-	qihoo,360t7)
+	zyxel,nwa50ax-pro)
-		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan
+		ucidef_set_interface_lan "eth0"
-		;;
-	glinet,gl-mt6000|\
-	tplink,tl-xdr4288|\
-	tplink,tl-xdr6088)
-		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" eth1
 		;;
 	tplink,tl-xdr6086)
 		ucidef_set_interfaces_lan_wan "lan1 lan2" eth1

target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac

@@ -80,11 +80,6 @@ case "$board" in
 		[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
 		[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
 		;;
-	ubnt,unifi-6-plus)
-		addr=$(mtd_get_mac_binary EEPROM 0x6)
-		[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
-		[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
-		;;
 	qihoo,360t7)
 		addr=$(mtd_get_mac_ascii factory lanMac)
 		[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
@@ -95,6 +90,11 @@ case "$board" in
 	tplink,tl-xdr6088)
 		[ "$PHYNBR" = "0" ] && get_mac_label > /sys${DEVPATH}/macaddress
 		;;
+	ubnt,unifi-6-plus)
+		addr=$(mtd_get_mac_binary EEPROM 0x6)
+		[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
+		[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
+		;;
 	zbtlink,zbt-z8102ax|\
 	zyxel,ex5601-t0|\
 	zyxel,ex5601-t0-ubootmod)

target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh

@@ -102,15 +102,6 @@ platform_do_upgrade() {
 		CI_ROOTPART="rootfs"
 		emmc_do_upgrade "$1"
 		;;
-	mercusys,mr90x-v1)
-		CI_UBIPART="ubi0"
-		nand_do_upgrade "$1"
-		;;
-	ubnt,unifi-6-plus)
-		CI_KERNPART="kernel0"
-		EMMC_ROOT_DEV="$(cmdline_get_var root)"
-		emmc_do_upgrade "$1"
-		;;
 	h3c,magic-nx30-pro|\
 	jcg,q30-pro|\
 	mediatek,mt7981-rfb|\
@@ -123,6 +114,15 @@ platform_do_upgrade() {
 		CI_KERNPART="fit"
 		nand_do_upgrade "$1"
 		;;
+	mercusys,mr90x-v1)
+		CI_UBIPART="ubi0"
+		nand_do_upgrade "$1"
+		;;
+	ubnt,unifi-6-plus)
+		CI_KERNPART="kernel0"
+		EMMC_ROOT_DEV="$(cmdline_get_var root)"
+		emmc_do_upgrade "$1"
+		;;
 	xiaomi,mi-router-wr30u-stock|\
 	xiaomi,redmi-router-ax6000-stock)
 		CI_KERN_UBIPART=ubi_kernel

target/linux/mediatek/image/filogic.mk

@@ -105,6 +105,21 @@ define Build/cetron-header
 	rm $@.tmp
 endef
 
+define Device/acer_predator-w6
+  DEVICE_VENDOR := Acer
+  DEVICE_MODEL := Predator W6
+  DEVICE_DTS := mt7986a-acer-predator-w6
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTS_LOADADDR := 0x47000000
+  DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware kmod-mt7916-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
+  IMAGES := sysupgrade.bin
+  KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += acer_predator-w6
+
 define Device/asus_tuf-ax4200
   DEVICE_VENDOR := ASUS
   DEVICE_MODEL := TUF-AX4200
@@ -137,21 +152,6 @@ define Device/asus_tuf-ax6000
 endef
 TARGET_DEVICES += asus_tuf-ax6000
 
-define Device/acer_predator-w6
-  DEVICE_VENDOR := Acer
-  DEVICE_MODEL := Predator W6
-  DEVICE_DTS := mt7986a-acer-predator-w6
-  DEVICE_DTS_DIR := ../dts
-  DEVICE_DTS_LOADADDR := 0x47000000
-  DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware kmod-mt7916-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
-  IMAGES := sysupgrade.bin
-  KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
-  KERNEL_INITRAMFS := kernel-bin | lzma | \
-	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
-  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
-endef
-TARGET_DEVICES += acer_predator-w6
-
 define Device/bananapi_bpi-r3
   DEVICE_VENDOR := Bananapi
   DEVICE_MODEL := BPi-R3
@@ -354,24 +354,6 @@ define Device/jcg_q30-pro
 endef
 TARGET_DEVICES += jcg_q30-pro
 
-define Device/netgear_wax220
-  DEVICE_VENDOR := NETGEAR
-  DEVICE_MODEL := WAX220
-  DEVICE_DTS := mt7986b-netgear-wax220
-  DEVICE_DTS_DIR := ../dts
-  NETGEAR_ENC_MODEL := WAX220
-  NETGEAR_ENC_REGION := US
-  DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
-  KERNEL_INITRAMFS_SUFFIX := -recovery.itb
-  IMAGE_SIZE := 32768k
-  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
-  IMAGES += factory.img
-  # Padding to 10M seems to be required by OEM web interface
-  IMAGE/factory.img := sysupgrade-tar | \
-	  pad-to 10M | check-size | netgear-encrypted-factory
-endef
-TARGET_DEVICES += netgear_wax220
-
 define Device/mediatek_mt7981-rfb
   DEVICE_VENDOR := MediaTek
   DEVICE_MODEL := MT7981 rfb
@@ -543,6 +525,24 @@ define Device/mercusys_mr90x-v1
 endef
 TARGET_DEVICES += mercusys_mr90x-v1
 
+define Device/netgear_wax220
+  DEVICE_VENDOR := NETGEAR
+  DEVICE_MODEL := WAX220
+  DEVICE_DTS := mt7986b-netgear-wax220
+  DEVICE_DTS_DIR := ../dts
+  NETGEAR_ENC_MODEL := WAX220
+  NETGEAR_ENC_REGION := US
+  DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
+  KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+  IMAGE_SIZE := 32768k
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+  IMAGES += factory.img
+  # Padding to 10M seems to be required by OEM web interface
+  IMAGE/factory.img := sysupgrade-tar | \
+	  pad-to 10M | check-size | netgear-encrypted-factory
+endef
+TARGET_DEVICES += netgear_wax220
+
 define Device/qihoo_360t7
   DEVICE_VENDOR := Qihoo
   DEVICE_MODEL := 360T7