Difuse/difos
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
difos/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi

154 lines
4 KiB
Text
Raw Normal View History

ipq806x: disentangle and clean up SoC DTSI files So far, the DTSI files on ipq806x had a linear inheritance: qcom-ipq8064.dtsi v qcom-ipq8064-v1.0.dtsi v qcom-ipq8064-v2.0.dtsi v qcom-ipq8065.dtsi This poses problems when one wants to set something that is specific to an architecture closer to the top of the tree. In this patch, we remove the chain-like inheritance and have all other files derived from qcom-ipq8064.dtsi (changing this name to something more generic is not possible due to upstream use). The removal of inheritance will require a few entries to be copied from qcom-ipq8064-v2.0.dtsi to qcom-ipq8065.dtsi. However, it also opens an opportunity for some clean-up: - Many definitions can be improved by just using the innermost labels. - Instead of disabling the CPU_SPC node for ipq8065, it is now off by default and enabled where needed. - Instead of patching phy-tx0-term-offset into qcom-ipq8064.dtsi and then having it changed for qcom-ipq8064-v2.0/qcom-ipq8065, just have the appropriate settings done in the lower DTSI files directly. - For the opp_table0 adjustments for ipq8065, just redefine what's changed, but don't add all the untouched properties again. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-03 13:00:58 +00:00
#include "qcom-ipq8064.dtsi"
ipq806x: copy files to kernel 5.4 Copy files to kernel 5.4 to start porting. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-26 03:47:49 +00:00
/ {
model = "Qualcomm IPQ8065";
compatible = "qcom,ipq8065", "qcom,ipq8064";
ipq806x: move serial0 to DTSI files All device DTS files in the target set the serial0 property to the same value (*). So, let's move the definitions to the DTSI files. That's also where the kernel defines it (qcom-ipq8064-v1.0.dtsi). * The only exception is ipq8064-db149, which defines "serial0 = &uart2;", but inside a block called "alias" instead of "aliases". It must be assumed that this is broken anyway, so we don't touch it here. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-03 13:46:31 +00:00
aliases {
serial0 = &gsbi4_serial;
};
ipq806x: move stdout-path to DTSI files All device DTS files in the target set the stdout-path to the same value. So, let's move the definitions to the DTSI files. That's also where the kernel defines it (qcom-ipq8064-v1.0.dtsi). Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-03 13:35:03 +00:00
chosen {
stdout-path = "serial0:115200n8";
};
ipq806x: move further common nodes to the DTSI files The moves a few additional common nodes to the common DTSI files for qcom-ipq8064-v2.0 and qcom-ipq8065 devices. Remove a few redundant definitions on the way. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-14 14:31:40 +00:00
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
};
&gsbi4 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
serial@16340000 {
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
ipq806x: copy files to kernel 5.4 Copy files to kernel 5.4 to start porting. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-26 03:47:49 +00:00
};
ipq806x: disentangle and clean up SoC DTSI files So far, the DTSI files on ipq806x had a linear inheritance: qcom-ipq8064.dtsi v qcom-ipq8064-v1.0.dtsi v qcom-ipq8064-v2.0.dtsi v qcom-ipq8065.dtsi This poses problems when one wants to set something that is specific to an architecture closer to the top of the tree. In this patch, we remove the chain-like inheritance and have all other files derived from qcom-ipq8064.dtsi (changing this name to something more generic is not possible due to upstream use). The removal of inheritance will require a few entries to be copied from qcom-ipq8064-v2.0.dtsi to qcom-ipq8065.dtsi. However, it also opens an opportunity for some clean-up: - Many definitions can be improved by just using the innermost labels. - Instead of disabling the CPU_SPC node for ipq8065, it is now off by default and enabled where needed. - Instead of patching phy-tx0-term-offset into qcom-ipq8064.dtsi and then having it changed for qcom-ipq8064-v2.0/qcom-ipq8065, just have the appropriate settings done in the lower DTSI files directly. - For the opp_table0 adjustments for ipq8065, just redefine what's changed, but don't add all the untouched properties again. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-03 13:00:58 +00:00
&pcie0 {
ipq806x: replace pci patchset with upstream version Changes: - Update patches - Update dts with new binding Tx term offset dropped and replaced with a new compatible Removed: - 0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x Pci init does the same exact thing (was needed in older kernel version) - 0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B Rejected upstream, can't find any reason to have this. No regression with testing it on R7800. Tested on R7800 (ipq8065), R7500 v2 ("ipq8064-v2") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800] [rebase and refresh] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-08 14:50:04 +00:00
compatible = "qcom,pcie-ipq8064-v2";
ipq806x: disentangle and clean up SoC DTSI files So far, the DTSI files on ipq806x had a linear inheritance: qcom-ipq8064.dtsi v qcom-ipq8064-v1.0.dtsi v qcom-ipq8064-v2.0.dtsi v qcom-ipq8065.dtsi This poses problems when one wants to set something that is specific to an architecture closer to the top of the tree. In this patch, we remove the chain-like inheritance and have all other files derived from qcom-ipq8064.dtsi (changing this name to something more generic is not possible due to upstream use). The removal of inheritance will require a few entries to be copied from qcom-ipq8064-v2.0.dtsi to qcom-ipq8065.dtsi. However, it also opens an opportunity for some clean-up: - Many definitions can be improved by just using the innermost labels. - Instead of disabling the CPU_SPC node for ipq8065, it is now off by default and enabled where needed. - Instead of patching phy-tx0-term-offset into qcom-ipq8064.dtsi and then having it changed for qcom-ipq8064-v2.0/qcom-ipq8065, just have the appropriate settings done in the lower DTSI files directly. - For the opp_table0 adjustments for ipq8065, just redefine what's changed, but don't add all the untouched properties again. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-03 13:00:58 +00:00
};
&pcie1 {
ipq806x: replace pci patchset with upstream version Changes: - Update patches - Update dts with new binding Tx term offset dropped and replaced with a new compatible Removed: - 0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x Pci init does the same exact thing (was needed in older kernel version) - 0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B Rejected upstream, can't find any reason to have this. No regression with testing it on R7800. Tested on R7800 (ipq8065), R7500 v2 ("ipq8064-v2") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800] [rebase and refresh] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-08 14:50:04 +00:00
compatible = "qcom,pcie-ipq8064-v2";
ipq806x: disentangle and clean up SoC DTSI files So far, the DTSI files on ipq806x had a linear inheritance: qcom-ipq8064.dtsi v qcom-ipq8064-v1.0.dtsi v qcom-ipq8064-v2.0.dtsi v qcom-ipq8065.dtsi This poses problems when one wants to set something that is specific to an architecture closer to the top of the tree. In this patch, we remove the chain-like inheritance and have all other files derived from qcom-ipq8064.dtsi (changing this name to something more generic is not possible due to upstream use). The removal of inheritance will require a few entries to be copied from qcom-ipq8064-v2.0.dtsi to qcom-ipq8065.dtsi. However, it also opens an opportunity for some clean-up: - Many definitions can be improved by just using the innermost labels. - Instead of disabling the CPU_SPC node for ipq8065, it is now off by default and enabled where needed. - Instead of patching phy-tx0-term-offset into qcom-ipq8064.dtsi and then having it changed for qcom-ipq8064-v2.0/qcom-ipq8065, just have the appropriate settings done in the lower DTSI files directly. - For the opp_table0 adjustments for ipq8065, just redefine what's changed, but don't add all the untouched properties again. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-03 13:00:58 +00:00
};
&pcie2 {
ipq806x: replace pci patchset with upstream version Changes: - Update patches - Update dts with new binding Tx term offset dropped and replaced with a new compatible Removed: - 0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x Pci init does the same exact thing (was needed in older kernel version) - 0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B Rejected upstream, can't find any reason to have this. No regression with testing it on R7800. Tested on R7800 (ipq8065), R7500 v2 ("ipq8064-v2") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800] [rebase and refresh] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-08 14:50:04 +00:00
compatible = "qcom,pcie-ipq8064-v2";
ipq806x: disentangle and clean up SoC DTSI files So far, the DTSI files on ipq806x had a linear inheritance: qcom-ipq8064.dtsi v qcom-ipq8064-v1.0.dtsi v qcom-ipq8064-v2.0.dtsi v qcom-ipq8065.dtsi This poses problems when one wants to set something that is specific to an architecture closer to the top of the tree. In this patch, we remove the chain-like inheritance and have all other files derived from qcom-ipq8064.dtsi (changing this name to something more generic is not possible due to upstream use). The removal of inheritance will require a few entries to be copied from qcom-ipq8064-v2.0.dtsi to qcom-ipq8065.dtsi. However, it also opens an opportunity for some clean-up: - Many definitions can be improved by just using the innermost labels. - Instead of disabling the CPU_SPC node for ipq8065, it is now off by default and enabled where needed. - Instead of patching phy-tx0-term-offset into qcom-ipq8064.dtsi and then having it changed for qcom-ipq8064-v2.0/qcom-ipq8065, just have the appropriate settings done in the lower DTSI files directly. - For the opp_table0 adjustments for ipq8065, just redefine what's changed, but don't add all the untouched properties again. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-03 13:00:58 +00:00
};
ipq806x: use qcom-ipq8064.dtsi from upstream Though a qcom-ipq8064.dtsi file exists upstream, we still do overwrite it with a full version of our own in the ipq806x target. About half of the contents of our file are upstream content, the other half are local improvements. To prevent us from having a lot of code maintained twice in parallel, this adjusts the target to use the upstream qcom-ipq8064.dtsi. Our local changes are arranged into three patches, the first pulling a commit from upstream, the second doing a few small adjustments, and the third adding all additional stuff. This should get us the best of both worlds. The property "ports-implemented" on sata@29000000 is moved to 2nd-level DTSI files as kernel defines it there as well. While at, rename 080-ARM-dts-qcom-add-gpio-ranges-property.patch to include the kernel version where it's added upstream. Even though this might look more complicated in the first place, the aim is to bring our files closer to upstream, so we can benefit from changes directly and vice-versa. After all, this drop about 650 lines just copied from the upstream DTSI file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-03 09:12:10 +00:00
&sata {
ports-implemented = <0x1>;
};
ipq806x: disentangle and clean up SoC DTSI files So far, the DTSI files on ipq806x had a linear inheritance: qcom-ipq8064.dtsi v qcom-ipq8064-v1.0.dtsi v qcom-ipq8064-v2.0.dtsi v qcom-ipq8065.dtsi This poses problems when one wants to set something that is specific to an architecture closer to the top of the tree. In this patch, we remove the chain-like inheritance and have all other files derived from qcom-ipq8064.dtsi (changing this name to something more generic is not possible due to upstream use). The removal of inheritance will require a few entries to be copied from qcom-ipq8064-v2.0.dtsi to qcom-ipq8065.dtsi. However, it also opens an opportunity for some clean-up: - Many definitions can be improved by just using the innermost labels. - Instead of disabling the CPU_SPC node for ipq8065, it is now off by default and enabled where needed. - Instead of patching phy-tx0-term-offset into qcom-ipq8064.dtsi and then having it changed for qcom-ipq8064-v2.0/qcom-ipq8065, just have the appropriate settings done in the lower DTSI files directly. - For the opp_table0 adjustments for ipq8065, just redefine what's changed, but don't add all the untouched properties again. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-03 13:00:58 +00:00
&smb208_s2a {
regulator-min-microvolt = <775000>;
regulator-max-microvolt = <1275000>;
};
ipq806x: copy files to kernel 5.4 Copy files to kernel 5.4 to start porting. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-26 03:47:49 +00:00
ipq806x: disentangle and clean up SoC DTSI files So far, the DTSI files on ipq806x had a linear inheritance: qcom-ipq8064.dtsi v qcom-ipq8064-v1.0.dtsi v qcom-ipq8064-v2.0.dtsi v qcom-ipq8065.dtsi This poses problems when one wants to set something that is specific to an architecture closer to the top of the tree. In this patch, we remove the chain-like inheritance and have all other files derived from qcom-ipq8064.dtsi (changing this name to something more generic is not possible due to upstream use). The removal of inheritance will require a few entries to be copied from qcom-ipq8064-v2.0.dtsi to qcom-ipq8065.dtsi. However, it also opens an opportunity for some clean-up: - Many definitions can be improved by just using the innermost labels. - Instead of disabling the CPU_SPC node for ipq8065, it is now off by default and enabled where needed. - Instead of patching phy-tx0-term-offset into qcom-ipq8064.dtsi and then having it changed for qcom-ipq8064-v2.0/qcom-ipq8065, just have the appropriate settings done in the lower DTSI files directly. - For the opp_table0 adjustments for ipq8065, just redefine what's changed, but don't add all the untouched properties again. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-03 13:00:58 +00:00
&smb208_s2b {
regulator-min-microvolt = <775000>;
regulator-max-microvolt = <1275000>;
};
&ss_phy_0 {
ipq806x: replace phy dwc3 patch with upstream version - Replace dwc3 phy patch with upstream version - Rework the dts to use the upstream bindings - Update changed config flags - Rename module to reflect config name Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [fix qcom,tx-deamp_3_5db typo, refresh patches, rename kmod] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800]
2020-08-10 11:56:15 +00:00
qcom,rx-eq = <2>;
qcom,tx-deamp_3_5db = <32>;
qcom,mpll = <5>;
ipq806x: disentangle and clean up SoC DTSI files So far, the DTSI files on ipq806x had a linear inheritance: qcom-ipq8064.dtsi v qcom-ipq8064-v1.0.dtsi v qcom-ipq8064-v2.0.dtsi v qcom-ipq8065.dtsi This poses problems when one wants to set something that is specific to an architecture closer to the top of the tree. In this patch, we remove the chain-like inheritance and have all other files derived from qcom-ipq8064.dtsi (changing this name to something more generic is not possible due to upstream use). The removal of inheritance will require a few entries to be copied from qcom-ipq8064-v2.0.dtsi to qcom-ipq8065.dtsi. However, it also opens an opportunity for some clean-up: - Many definitions can be improved by just using the innermost labels. - Instead of disabling the CPU_SPC node for ipq8065, it is now off by default and enabled where needed. - Instead of patching phy-tx0-term-offset into qcom-ipq8064.dtsi and then having it changed for qcom-ipq8064-v2.0/qcom-ipq8065, just have the appropriate settings done in the lower DTSI files directly. - For the opp_table0 adjustments for ipq8065, just redefine what's changed, but don't add all the untouched properties again. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-03 13:00:58 +00:00
};
&ss_phy_1 {
ipq806x: replace phy dwc3 patch with upstream version - Replace dwc3 phy patch with upstream version - Rework the dts to use the upstream bindings - Update changed config flags - Rename module to reflect config name Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [fix qcom,tx-deamp_3_5db typo, refresh patches, rename kmod] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800]
2020-08-10 11:56:15 +00:00
qcom,rx-eq = <2>;
qcom,tx-deamp_3_5db = <32>;
qcom,mpll = <5>;
ipq806x: disentangle and clean up SoC DTSI files So far, the DTSI files on ipq806x had a linear inheritance: qcom-ipq8064.dtsi v qcom-ipq8064-v1.0.dtsi v qcom-ipq8064-v2.0.dtsi v qcom-ipq8065.dtsi This poses problems when one wants to set something that is specific to an architecture closer to the top of the tree. In this patch, we remove the chain-like inheritance and have all other files derived from qcom-ipq8064.dtsi (changing this name to something more generic is not possible due to upstream use). The removal of inheritance will require a few entries to be copied from qcom-ipq8064-v2.0.dtsi to qcom-ipq8065.dtsi. However, it also opens an opportunity for some clean-up: - Many definitions can be improved by just using the innermost labels. - Instead of disabling the CPU_SPC node for ipq8065, it is now off by default and enabled where needed. - Instead of patching phy-tx0-term-offset into qcom-ipq8064.dtsi and then having it changed for qcom-ipq8064-v2.0/qcom-ipq8065, just have the appropriate settings done in the lower DTSI files directly. - For the opp_table0 adjustments for ipq8065, just redefine what's changed, but don't add all the untouched properties again. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-03 13:00:58 +00:00
};
&opp_table0 {
ipq806x: copy files to kernel 5.4 Copy files to kernel 5.4 to start porting. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-26 03:47:49 +00:00
/*
* On ipq8065 1.2 ghz freq is not present
* Remove it to make cpufreq work and not
* complain for missing definition
*/
/delete-node/opp-1200000000;
ipq806x: refresh dtsi patches - Add new tsens node - Add new cpufreq required nodes - Drop arm cpuidle compatible - Fix duplicate node set upstream - Add voltage tolerance value for cpu opp Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-03-28 12:17:36 +00:00
opp-384000000 {
opp-microvolt-speed0-pvs0-v0 = <970000 975000 980000>;
opp-microvolt-speed0-pvs1-v0 = <945000 950000 955000>;
opp-microvolt-speed0-pvs2-v0 = <920000 925000 930000>;
opp-microvolt-speed0-pvs3-v0 = <985000 900000 905000>;
opp-microvolt-speed0-pvs4-v0 = <870000 875000 880000>;
opp-microvolt-speed0-pvs5-v0 = <820000 825000 830000>;
opp-microvolt-speed0-pvs6-v0 = <770000 775000 780000>;
ipq806x: copy files to kernel 5.4 Copy files to kernel 5.4 to start porting. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-26 03:47:49 +00:00
};
opp-600000000 {
ipq806x: refresh dtsi patches - Add new tsens node - Add new cpufreq required nodes - Drop arm cpuidle compatible - Fix duplicate node set upstream - Add voltage tolerance value for cpu opp Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-03-28 12:17:36 +00:00
opp-microvolt-speed0-pvs0-v0 = <995000 1000000 1005000>;
opp-microvolt-speed0-pvs1-v0 = <970000 975000 980000>;
opp-microvolt-speed0-pvs2-v0 = <945000 950000 955000>;
opp-microvolt-speed0-pvs3-v0 = <920000 925000 930000>;
opp-microvolt-speed0-pvs4-v0 = <895000 900000 905000>;
opp-microvolt-speed0-pvs5-v0 = <845000 850000 855000>;
opp-microvolt-speed0-pvs6-v0 = <795000 800000 805000>;
ipq806x: copy files to kernel 5.4 Copy files to kernel 5.4 to start porting. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-26 03:47:49 +00:00
};
opp-800000000 {
ipq806x: refresh dtsi patches - Add new tsens node - Add new cpufreq required nodes - Drop arm cpuidle compatible - Fix duplicate node set upstream - Add voltage tolerance value for cpu opp Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-03-28 12:17:36 +00:00
opp-microvolt-speed0-pvs0-v0 = <1045000 1050000 1055000>;
opp-microvolt-speed0-pvs1-v0 = <1020000 1025000 1030000>;
opp-microvolt-speed0-pvs2-v0 = <995000 1000000 1005000>;
opp-microvolt-speed0-pvs3-v0 = <970000 975000 980000>;
opp-microvolt-speed0-pvs4-v0 = <945000 950000 955000>;
opp-microvolt-speed0-pvs5-v0 = <895000 900000 905000>;
opp-microvolt-speed0-pvs6-v0 = <845000 850000 855000>;
ipq806x: copy files to kernel 5.4 Copy files to kernel 5.4 to start porting. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-26 03:47:49 +00:00
};
opp-1000000000 {
ipq806x: refresh dtsi patches - Add new tsens node - Add new cpufreq required nodes - Drop arm cpuidle compatible - Fix duplicate node set upstream - Add voltage tolerance value for cpu opp Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-03-28 12:17:36 +00:00
opp-microvolt-speed0-pvs0-v0 = <1095000 1100000 1105000>;
opp-microvolt-speed0-pvs1-v0 = <1070000 1075000 1080000>;
opp-microvolt-speed0-pvs2-v0 = <1045000 1050000 1055000>;
opp-microvolt-speed0-pvs3-v0 = <1020000 1025000 1030000>;
opp-microvolt-speed0-pvs4-v0 = <995000 1000000 1005000>;
opp-microvolt-speed0-pvs5-v0 = <945000 950000 955000>;
opp-microvolt-speed0-pvs6-v0 = <895000 900000 905000>;
ipq806x: copy files to kernel 5.4 Copy files to kernel 5.4 to start porting. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-26 03:47:49 +00:00
};
opp-1400000000 {
ipq806x: refresh dtsi patches - Add new tsens node - Add new cpufreq required nodes - Drop arm cpuidle compatible - Fix duplicate node set upstream - Add voltage tolerance value for cpu opp Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-03-28 12:17:36 +00:00
opp-microvolt-speed0-pvs0-v0 = <1170000 1175000 1180000>;
opp-microvolt-speed0-pvs1-v0 = <1145000 1150000 1155000>;
opp-microvolt-speed0-pvs2-v0 = <1120000 1125000 1130000>;
opp-microvolt-speed0-pvs3-v0 = <1095000 1100000 1105000>;
opp-microvolt-speed0-pvs4-v0 = <1070000 1075000 1080000>;
opp-microvolt-speed0-pvs5-v0 = <1020000 1025000 1030000>;
opp-microvolt-speed0-pvs6-v0 = <970000 975000 980000>;
opp-level = <1>;
ipq806x: copy files to kernel 5.4 Copy files to kernel 5.4 to start porting. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-26 03:47:49 +00:00
};
opp-1725000000 {
opp-hz = /bits/ 64 <1725000000>;
ipq806x: refresh dtsi patches - Add new tsens node - Add new cpufreq required nodes - Drop arm cpuidle compatible - Fix duplicate node set upstream - Add voltage tolerance value for cpu opp Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-03-28 12:17:36 +00:00
opp-microvolt-speed0-pvs0-v0 = <1257500 1262500 1267500>;
opp-microvolt-speed0-pvs1-v0 = <1220000 1225000 1230000>;
opp-microvolt-speed0-pvs2-v0 = <1195000 1200000 1205000>;
opp-microvolt-speed0-pvs3-v0 = <1170000 1175000 1180000>;
opp-microvolt-speed0-pvs4-v0 = <1145000 1150000 1155000>;
opp-microvolt-speed0-pvs5-v0 = <1095000 1100000 1105000>;
opp-microvolt-speed0-pvs6-v0 = <1045000 1050000 1055000>;
ipq806x: copy files to kernel 5.4 Copy files to kernel 5.4 to start porting. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-26 03:47:49 +00:00
opp-supported-hw = <0x1>;
clock-latency-ns = <100000>;
ipq806x: refresh dtsi patches - Add new tsens node - Add new cpufreq required nodes - Drop arm cpuidle compatible - Fix duplicate node set upstream - Add voltage tolerance value for cpu opp Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-03-28 12:17:36 +00:00
opp-level = <2>;
ipq806x: copy files to kernel 5.4 Copy files to kernel 5.4 to start porting. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-01-26 03:47:49 +00:00
};
};
Reference in a new issue Copy permalink